linux-yocto/arch/powerpc/perf/isa207-common.c
Athira Rajeev 81d2a85c65 arch/powerpc/perf: Check the instruction type before creating sample with perf_mem_data_src
[ Upstream commit 2ffb26afa64261139e608bf087a0c1fe24d76d4d ]

perf mem report aborts as below sometimes (during some corner
case) in powerpc:

   # ./perf mem report 1>out
   *** stack smashing detected ***: terminated
   Aborted (core dumped)

The backtrace is as below:
   __pthread_kill_implementation ()
   raise ()
   abort ()
   __libc_message
   __fortify_fail
   __stack_chk_fail
   hist_entry.lvl_snprintf
   __sort__hpp_entry
   __hist_entry__snprintf
   hists.fprintf
   cmd_report
   cmd_mem

Snippet of code which triggers the issue
from tools/perf/util/sort.c

   static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
                                    size_t size, unsigned int width)
   {
        char out[64];

        perf_mem__lvl_scnprintf(out, sizeof(out), he->mem_info);
        return repsep_snprintf(bf, size, "%-*s", width, out);
   }

The value of "out" is filled from perf_mem_data_src value.
Debugging this further showed that for some corner cases, the
value of "data_src" was pointing to wrong value. This resulted
in bigger size of string and causing stack check fail.

The perf mem data source values are captured in the sample via
isa207_get_mem_data_src function. The initial check is to fetch
the type of sampled instruction. If the type of instruction is
not valid (not a load/store instruction), the function returns.

Since 'commit e16fd7f2cb ("perf: Use sample_flags for data_src")',
data_src field is not initialized by the perf_sample_data_init()
function. If the PMU driver doesn't set the data_src value to zero if
type is not valid, this will result in uninitailised value for data_src.
The uninitailised value of data_src resulted in stack check fail
followed by abort for "perf mem report".

When requesting for data source information in the sample, the
instruction type is expected to be load or store instruction.
In ISA v3.0, due to hardware limitation, there are corner cases
where the instruction type other than load or store is observed.
In ISA v3.0 and before values "0" and "7" are considered reserved.
In ISA v3.1, value "7" has been used to indicate "larx/stcx".
Drop the sample if instruction type has reserved values for this
field with a ISA version check. Initialize data_src to zero in
isa207_get_mem_data_src if the instruction type is not load/store.

Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250121131621.39054-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-04 14:40:15 +02:00

843 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Common Performance counter support functions for PowerISA v2.07 processors.
*
* Copyright 2009 Paul Mackerras, IBM Corporation.
* Copyright 2013 Michael Ellerman, IBM Corporation.
* Copyright 2016 Madhavan Srinivasan, IBM Corporation.
*/
#include "isa207-common.h"
PMU_FORMAT_ATTR(event, "config:0-49");
PMU_FORMAT_ATTR(pmcxsel, "config:0-7");
PMU_FORMAT_ATTR(mark, "config:8");
PMU_FORMAT_ATTR(combine, "config:11");
PMU_FORMAT_ATTR(unit, "config:12-15");
PMU_FORMAT_ATTR(pmc, "config:16-19");
PMU_FORMAT_ATTR(cache_sel, "config:20-23");
PMU_FORMAT_ATTR(sample_mode, "config:24-28");
PMU_FORMAT_ATTR(thresh_sel, "config:29-31");
PMU_FORMAT_ATTR(thresh_stop, "config:32-35");
PMU_FORMAT_ATTR(thresh_start, "config:36-39");
PMU_FORMAT_ATTR(thresh_cmp, "config:40-49");
static struct attribute *isa207_pmu_format_attr[] = {
&format_attr_event.attr,
&format_attr_pmcxsel.attr,
&format_attr_mark.attr,
&format_attr_combine.attr,
&format_attr_unit.attr,
&format_attr_pmc.attr,
&format_attr_cache_sel.attr,
&format_attr_sample_mode.attr,
&format_attr_thresh_sel.attr,
&format_attr_thresh_stop.attr,
&format_attr_thresh_start.attr,
&format_attr_thresh_cmp.attr,
NULL,
};
const struct attribute_group isa207_pmu_format_group = {
.name = "format",
.attrs = isa207_pmu_format_attr,
};
static inline bool event_is_fab_match(u64 event)
{
/* Only check pmc, unit and pmcxsel, ignore the edge bit (0) */
event &= 0xff0fe;
/* PM_MRK_FAB_RSP_MATCH & PM_MRK_FAB_RSP_MATCH_CYC */
return (event == 0x30056 || event == 0x4f052);
}
static bool is_event_valid(u64 event)
{
u64 valid_mask = EVENT_VALID_MASK;
if (cpu_has_feature(CPU_FTR_ARCH_31))
valid_mask = p10_EVENT_VALID_MASK;
else if (cpu_has_feature(CPU_FTR_ARCH_300))
valid_mask = p9_EVENT_VALID_MASK;
return !(event & ~valid_mask);
}
static inline bool is_event_marked(u64 event)
{
if (event & EVENT_IS_MARKED)
return true;
return false;
}
static unsigned long sdar_mod_val(u64 event)
{
if (cpu_has_feature(CPU_FTR_ARCH_31))
return p10_SDAR_MODE(event);
return p9_SDAR_MODE(event);
}
static void mmcra_sdar_mode(u64 event, unsigned long *mmcra)
{
/*
* MMCRA[SDAR_MODE] specifies how the SDAR should be updated in
* continuous sampling mode.
*
* Incase of Power8:
* MMCRA[SDAR_MODE] will be programmed as "0b01" for continuous sampling
* mode and will be un-changed when setting MMCRA[63] (Marked events).
*
* Incase of Power9/power10:
* Marked event: MMCRA[SDAR_MODE] will be set to 0b00 ('No Updates'),
* or if group already have any marked events.
* For rest
* MMCRA[SDAR_MODE] will be set from event code.
* If sdar_mode from event is zero, default to 0b01. Hardware
* requires that we set a non-zero value.
*/
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (is_event_marked(event) || (*mmcra & MMCRA_SAMPLE_ENABLE))
*mmcra &= MMCRA_SDAR_MODE_NO_UPDATES;
else if (sdar_mod_val(event))
*mmcra |= sdar_mod_val(event) << MMCRA_SDAR_MODE_SHIFT;
else
*mmcra |= MMCRA_SDAR_MODE_DCACHE;
} else
*mmcra |= MMCRA_SDAR_MODE_TLB;
}
static int p10_thresh_cmp_val(u64 value)
{
int exp = 0;
u64 result = value;
if (!value)
return value;
/*
* Incase of P10, thresh_cmp value is not part of raw event code
* and provided via attr.config1 parameter. To program threshold in MMCRA,
* take a 18 bit number N and shift right 2 places and increment
* the exponent E by 1 until the upper 10 bits of N are zero.
* Write E to the threshold exponent and write the lower 8 bits of N
* to the threshold mantissa.
* The max threshold that can be written is 261120.
*/
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
if (value > 261120)
value = 261120;
while ((64 - __builtin_clzl(value)) > 8) {
exp++;
value >>= 2;
}
/*
* Note that it is invalid to write a mantissa with the
* upper 2 bits of mantissa being zero, unless the
* exponent is also zero.
*/
if (!(value & 0xC0) && exp)
result = -1;
else
result = (exp << 8) | value;
}
return result;
}
static u64 thresh_cmp_val(u64 value)
{
if (cpu_has_feature(CPU_FTR_ARCH_31))
value = p10_thresh_cmp_val(value);
/*
* Since location of threshold compare bits in MMCRA
* is different for p8, using different shift value.
*/
if (cpu_has_feature(CPU_FTR_ARCH_300))
return value << p9_MMCRA_THR_CMP_SHIFT;
else
return value << MMCRA_THR_CMP_SHIFT;
}
static unsigned long combine_from_event(u64 event)
{
if (cpu_has_feature(CPU_FTR_ARCH_300))
return p9_EVENT_COMBINE(event);
return EVENT_COMBINE(event);
}
static unsigned long combine_shift(unsigned long pmc)
{
if (cpu_has_feature(CPU_FTR_ARCH_300))
return p9_MMCR1_COMBINE_SHIFT(pmc);
return MMCR1_COMBINE_SHIFT(pmc);
}
static inline bool event_is_threshold(u64 event)
{
return (event >> EVENT_THR_SEL_SHIFT) & EVENT_THR_SEL_MASK;
}
static bool is_thresh_cmp_valid(u64 event)
{
unsigned int cmp, exp;
if (cpu_has_feature(CPU_FTR_ARCH_31))
return p10_thresh_cmp_val(event) >= 0;
/*
* Check the mantissa upper two bits are not zero, unless the
* exponent is also zero. See the THRESH_CMP_MANTISSA doc.
*/
cmp = (event >> EVENT_THR_CMP_SHIFT) & EVENT_THR_CMP_MASK;
exp = cmp >> 7;
if (exp && (cmp & 0x60) == 0)
return false;
return true;
}
static unsigned int dc_ic_rld_quad_l1_sel(u64 event)
{
unsigned int cache;
cache = (event >> EVENT_CACHE_SEL_SHIFT) & MMCR1_DC_IC_QUAL_MASK;
return cache;
}
static inline u64 isa207_find_source(u64 idx, u32 sub_idx)
{
u64 ret = PERF_MEM_NA;
switch(idx) {
case 0:
/* Nothing to do */
break;
case 1:
ret = PH(LVL, L1) | LEVEL(L1) | P(SNOOP, HIT);
break;
case 2:
ret = PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HIT);
break;
case 3:
ret = PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
break;
case 4:
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
ret = P(SNOOP, HIT);
if (sub_idx == 1)
ret |= PH(LVL, LOC_RAM) | LEVEL(RAM);
else if (sub_idx == 2 || sub_idx == 3)
ret |= P(LVL, HIT) | LEVEL(PMEM);
else if (sub_idx == 4)
ret |= PH(LVL, REM_RAM1) | REM | LEVEL(RAM) | P(HOPS, 2);
else if (sub_idx == 5 || sub_idx == 7)
ret |= P(LVL, HIT) | LEVEL(PMEM) | REM;
else if (sub_idx == 6)
ret |= PH(LVL, REM_RAM2) | REM | LEVEL(RAM) | P(HOPS, 3);
} else {
if (sub_idx <= 1)
ret = PH(LVL, LOC_RAM);
else if (sub_idx > 1 && sub_idx <= 2)
ret = PH(LVL, REM_RAM1);
else
ret = PH(LVL, REM_RAM2);
ret |= P(SNOOP, HIT);
}
break;
case 5:
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
ret = REM | P(HOPS, 0);
if (sub_idx == 0 || sub_idx == 4)
ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HIT);
else if (sub_idx == 1 || sub_idx == 5)
ret |= PH(LVL, L2) | LEVEL(L2) | P(SNOOP, HITM);
else if (sub_idx == 2 || sub_idx == 6)
ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HIT);
else if (sub_idx == 3 || sub_idx == 7)
ret |= PH(LVL, L3) | LEVEL(L3) | P(SNOOP, HITM);
} else {
if (sub_idx == 0)
ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HIT) | P(HOPS, 0);
else if (sub_idx == 1)
ret = PH(LVL, L2) | LEVEL(L2) | REM | P(SNOOP, HITM) | P(HOPS, 0);
else if (sub_idx == 2 || sub_idx == 4)
ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HIT) | P(HOPS, 0);
else if (sub_idx == 3 || sub_idx == 5)
ret = PH(LVL, L3) | LEVEL(L3) | REM | P(SNOOP, HITM) | P(HOPS, 0);
}
break;
case 6:
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
if (sub_idx == 0)
ret = PH(LVL, REM_CCE1) | LEVEL(ANY_CACHE) | REM |
P(SNOOP, HIT) | P(HOPS, 2);
else if (sub_idx == 1)
ret = PH(LVL, REM_CCE1) | LEVEL(ANY_CACHE) | REM |
P(SNOOP, HITM) | P(HOPS, 2);
else if (sub_idx == 2)
ret = PH(LVL, REM_CCE2) | LEVEL(ANY_CACHE) | REM |
P(SNOOP, HIT) | P(HOPS, 3);
else if (sub_idx == 3)
ret = PH(LVL, REM_CCE2) | LEVEL(ANY_CACHE) | REM |
P(SNOOP, HITM) | P(HOPS, 3);
} else {
ret = PH(LVL, REM_CCE2);
if (sub_idx == 0 || sub_idx == 2)
ret |= P(SNOOP, HIT);
else if (sub_idx == 1 || sub_idx == 3)
ret |= P(SNOOP, HITM);
}
break;
case 7:
ret = PM(LVL, L1);
break;
}
return ret;
}
void isa207_get_mem_data_src(union perf_mem_data_src *dsrc, u32 flags,
struct pt_regs *regs)
{
u64 idx;
u32 sub_idx;
u64 sier;
u64 val;
/* Skip if no SIER support */
if (!(flags & PPMU_HAS_SIER)) {
dsrc->val = 0;
return;
}
sier = mfspr(SPRN_SIER);
val = (sier & ISA207_SIER_TYPE_MASK) >> ISA207_SIER_TYPE_SHIFT;
if (val != 1 && val != 2 && !(val == 7 && cpu_has_feature(CPU_FTR_ARCH_31))) {
dsrc->val = 0;
return;
}
idx = (sier & ISA207_SIER_LDST_MASK) >> ISA207_SIER_LDST_SHIFT;
sub_idx = (sier & ISA207_SIER_DATA_SRC_MASK) >> ISA207_SIER_DATA_SRC_SHIFT;
dsrc->val = isa207_find_source(idx, sub_idx);
if (val == 7) {
u64 mmcra;
u32 op_type;
/*
* Type 0b111 denotes either larx or stcx instruction. Use the
* MMCRA sampling bits [57:59] along with the type value
* to determine the exact instruction type. If the sampling
* criteria is neither load or store, set the type as default
* to NA.
*/
mmcra = mfspr(SPRN_MMCRA);
op_type = (mmcra >> MMCRA_SAMP_ELIG_SHIFT) & MMCRA_SAMP_ELIG_MASK;
switch (op_type) {
case 5:
dsrc->val |= P(OP, LOAD);
break;
case 7:
dsrc->val |= P(OP, STORE);
break;
default:
dsrc->val |= P(OP, NA);
break;
}
} else {
dsrc->val |= (val == 1) ? P(OP, LOAD) : P(OP, STORE);
}
}
void isa207_get_mem_weight(u64 *weight, u64 type)
{
union perf_sample_weight *weight_fields;
u64 weight_lat;
u64 mmcra = mfspr(SPRN_MMCRA);
u64 exp = MMCRA_THR_CTR_EXP(mmcra);
u64 mantissa = MMCRA_THR_CTR_MANT(mmcra);
u64 sier = mfspr(SPRN_SIER);
u64 val = (sier & ISA207_SIER_TYPE_MASK) >> ISA207_SIER_TYPE_SHIFT;
if (cpu_has_feature(CPU_FTR_ARCH_31))
mantissa = P10_MMCRA_THR_CTR_MANT(mmcra);
if (val == 0 || (val == 7 && !cpu_has_feature(CPU_FTR_ARCH_31)))
weight_lat = 0;
else
weight_lat = mantissa << (2 * exp);
/*
* Use 64 bit weight field (full) if sample type is
* WEIGHT.
*
* if sample type is WEIGHT_STRUCT:
* - store memory latency in the lower 32 bits.
* - For ISA v3.1, use remaining two 16 bit fields of
* perf_sample_weight to store cycle counter values
* from sier2.
*/
weight_fields = (union perf_sample_weight *)weight;
if (type & PERF_SAMPLE_WEIGHT)
weight_fields->full = weight_lat;
else {
weight_fields->var1_dw = (u32)weight_lat;
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
weight_fields->var2_w = P10_SIER2_FINISH_CYC(mfspr(SPRN_SIER2));
weight_fields->var3_w = P10_SIER2_DISPATCH_CYC(mfspr(SPRN_SIER2));
}
}
}
int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp, u64 event_config1)
{
unsigned int unit, pmc, cache, ebb;
unsigned long mask, value;
mask = value = 0;
if (!is_event_valid(event))
return -1;
pmc = (event >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
unit = (event >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK;
if (cpu_has_feature(CPU_FTR_ARCH_31))
cache = (event >> EVENT_CACHE_SEL_SHIFT) &
p10_EVENT_CACHE_SEL_MASK;
else
cache = (event >> EVENT_CACHE_SEL_SHIFT) &
EVENT_CACHE_SEL_MASK;
ebb = (event >> EVENT_EBB_SHIFT) & EVENT_EBB_MASK;
if (pmc) {
u64 base_event;
if (pmc > 6)
return -1;
/* Ignore Linux defined bits when checking event below */
base_event = event & ~EVENT_LINUX_MASK;
if (pmc >= 5 && base_event != 0x500fa &&
base_event != 0x600f4)
return -1;
mask |= CNST_PMC_MASK(pmc);
value |= CNST_PMC_VAL(pmc);
/*
* PMC5 and PMC6 are used to count cycles and instructions and
* they do not support most of the constraint bits. Add a check
* to exclude PMC5/6 from most of the constraints except for
* EBB/BHRB.
*/
if (pmc >= 5)
goto ebb_bhrb;
}
if (pmc <= 4) {
/*
* Add to number of counters in use. Note this includes events with
* a PMC of 0 - they still need a PMC, it's just assigned later.
* Don't count events on PMC 5 & 6, there is only one valid event
* on each of those counters, and they are handled above.
*/
mask |= CNST_NC_MASK;
value |= CNST_NC_VAL;
}
if (unit >= 6 && unit <= 9) {
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
if (unit == 6) {
mask |= CNST_L2L3_GROUP_MASK;
value |= CNST_L2L3_GROUP_VAL(event >> p10_L2L3_EVENT_SHIFT);
}
} else if (cpu_has_feature(CPU_FTR_ARCH_300)) {
mask |= CNST_CACHE_GROUP_MASK;
value |= CNST_CACHE_GROUP_VAL(event & 0xff);
mask |= CNST_CACHE_PMC4_MASK;
if (pmc == 4)
value |= CNST_CACHE_PMC4_VAL;
} else if (cache & 0x7) {
/*
* L2/L3 events contain a cache selector field, which is
* supposed to be programmed into MMCRC. However MMCRC is only
* HV writable, and there is no API for guest kernels to modify
* it. The solution is for the hypervisor to initialise the
* field to zeroes, and for us to only ever allow events that
* have a cache selector of zero. The bank selector (bit 3) is
* irrelevant, as long as the rest of the value is 0.
*/
return -1;
}
} else if (cpu_has_feature(CPU_FTR_ARCH_300) || (event & EVENT_IS_L1)) {
mask |= CNST_L1_QUAL_MASK;
value |= CNST_L1_QUAL_VAL(cache);
}
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
mask |= CNST_RADIX_SCOPE_GROUP_MASK;
value |= CNST_RADIX_SCOPE_GROUP_VAL(event >> p10_EVENT_RADIX_SCOPE_QUAL_SHIFT);
}
if (is_event_marked(event)) {
mask |= CNST_SAMPLE_MASK;
value |= CNST_SAMPLE_VAL(event >> EVENT_SAMPLE_SHIFT);
}
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
if (event_is_threshold(event) && is_thresh_cmp_valid(event_config1)) {
mask |= CNST_THRESH_CTL_SEL_MASK;
value |= CNST_THRESH_CTL_SEL_VAL(event >> EVENT_THRESH_SHIFT);
mask |= p10_CNST_THRESH_CMP_MASK;
value |= p10_CNST_THRESH_CMP_VAL(p10_thresh_cmp_val(event_config1));
} else if (event_is_threshold(event))
return -1;
} else if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (event_is_threshold(event) && is_thresh_cmp_valid(event)) {
mask |= CNST_THRESH_MASK;
value |= CNST_THRESH_VAL(event >> EVENT_THRESH_SHIFT);
} else if (event_is_threshold(event))
return -1;
} else {
/*
* Special case for PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC,
* the threshold control bits are used for the match value.
*/
if (event_is_fab_match(event)) {
mask |= CNST_FAB_MATCH_MASK;
value |= CNST_FAB_MATCH_VAL(event >> EVENT_THR_CTL_SHIFT);
} else {
if (!is_thresh_cmp_valid(event))
return -1;
mask |= CNST_THRESH_MASK;
value |= CNST_THRESH_VAL(event >> EVENT_THRESH_SHIFT);
}
}
ebb_bhrb:
if (!pmc && ebb)
/* EBB events must specify the PMC */
return -1;
if (event & EVENT_WANTS_BHRB) {
if (!ebb)
/* Only EBB events can request BHRB */
return -1;
mask |= CNST_IFM_MASK;
value |= CNST_IFM_VAL(event >> EVENT_IFM_SHIFT);
}
/*
* All events must agree on EBB, either all request it or none.
* EBB events are pinned & exclusive, so this should never actually
* hit, but we leave it as a fallback in case.
*/
mask |= CNST_EBB_MASK;
value |= CNST_EBB_VAL(ebb);
*maskp = mask;
*valp = value;
return 0;
}
int isa207_compute_mmcr(u64 event[], int n_ev,
unsigned int hwc[], struct mmcr_regs *mmcr,
struct perf_event *pevents[], u32 flags)
{
unsigned long mmcra, mmcr1, mmcr2, unit, combine, psel, cache, val;
unsigned long mmcr3;
unsigned int pmc, pmc_inuse;
int i;
pmc_inuse = 0;
/* First pass to count resource use */
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
if (pmc)
pmc_inuse |= 1 << pmc;
}
mmcra = mmcr1 = mmcr2 = mmcr3 = 0;
/*
* Disable bhrb unless explicitly requested
* by setting MMCRA (BHRBRD) bit.
*/
if (cpu_has_feature(CPU_FTR_ARCH_31))
mmcra |= MMCRA_BHRB_DISABLE;
/* Second pass: assign PMCs, set all MMCR1 fields */
for (i = 0; i < n_ev; ++i) {
pmc = (event[i] >> EVENT_PMC_SHIFT) & EVENT_PMC_MASK;
unit = (event[i] >> EVENT_UNIT_SHIFT) & EVENT_UNIT_MASK;
combine = combine_from_event(event[i]);
psel = event[i] & EVENT_PSEL_MASK;
if (!pmc) {
for (pmc = 1; pmc <= 4; ++pmc) {
if (!(pmc_inuse & (1 << pmc)))
break;
}
pmc_inuse |= 1 << pmc;
}
if (pmc <= 4) {
mmcr1 |= unit << MMCR1_UNIT_SHIFT(pmc);
mmcr1 |= combine << combine_shift(pmc);
mmcr1 |= psel << MMCR1_PMCSEL_SHIFT(pmc);
}
/* In continuous sampling mode, update SDAR on TLB miss */
mmcra_sdar_mode(event[i], &mmcra);
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
cache = dc_ic_rld_quad_l1_sel(event[i]);
mmcr1 |= (cache) << MMCR1_DC_IC_QUAL_SHIFT;
} else {
if (event[i] & EVENT_IS_L1) {
cache = dc_ic_rld_quad_l1_sel(event[i]);
mmcr1 |= (cache) << MMCR1_DC_IC_QUAL_SHIFT;
}
}
/* Set RADIX_SCOPE_QUAL bit */
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
val = (event[i] >> p10_EVENT_RADIX_SCOPE_QUAL_SHIFT) &
p10_EVENT_RADIX_SCOPE_QUAL_MASK;
mmcr1 |= val << p10_MMCR1_RADIX_SCOPE_QUAL_SHIFT;
}
if (is_event_marked(event[i])) {
mmcra |= MMCRA_SAMPLE_ENABLE;
val = (event[i] >> EVENT_SAMPLE_SHIFT) & EVENT_SAMPLE_MASK;
if (val) {
mmcra |= (val & 3) << MMCRA_SAMP_MODE_SHIFT;
mmcra |= (val >> 2) << MMCRA_SAMP_ELIG_SHIFT;
}
}
/*
* PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC,
* the threshold bits are used for the match value.
*/
if (!cpu_has_feature(CPU_FTR_ARCH_300) && event_is_fab_match(event[i])) {
mmcr1 |= ((event[i] >> EVENT_THR_CTL_SHIFT) &
EVENT_THR_CTL_MASK) << MMCR1_FAB_SHIFT;
} else {
val = (event[i] >> EVENT_THR_CTL_SHIFT) & EVENT_THR_CTL_MASK;
mmcra |= val << MMCRA_THR_CTL_SHIFT;
val = (event[i] >> EVENT_THR_SEL_SHIFT) & EVENT_THR_SEL_MASK;
mmcra |= val << MMCRA_THR_SEL_SHIFT;
if (!cpu_has_feature(CPU_FTR_ARCH_31)) {
val = (event[i] >> EVENT_THR_CMP_SHIFT) &
EVENT_THR_CMP_MASK;
mmcra |= thresh_cmp_val(val);
} else if (flags & PPMU_HAS_ATTR_CONFIG1) {
val = (pevents[i]->attr.config1 >> p10_EVENT_THR_CMP_SHIFT) &
p10_EVENT_THR_CMP_MASK;
mmcra |= thresh_cmp_val(val);
}
}
if (cpu_has_feature(CPU_FTR_ARCH_31) && (unit == 6)) {
val = (event[i] >> p10_L2L3_EVENT_SHIFT) &
p10_EVENT_L2L3_SEL_MASK;
mmcr2 |= val << p10_L2L3_SEL_SHIFT;
}
if (event[i] & EVENT_WANTS_BHRB) {
val = (event[i] >> EVENT_IFM_SHIFT) & EVENT_IFM_MASK;
mmcra |= val << MMCRA_IFM_SHIFT;
}
/* set MMCRA (BHRBRD) to 0 if there is user request for BHRB */
if (cpu_has_feature(CPU_FTR_ARCH_31) &&
(has_branch_stack(pevents[i]) || (event[i] & EVENT_WANTS_BHRB)))
mmcra &= ~MMCRA_BHRB_DISABLE;
if (pevents[i]->attr.exclude_user)
mmcr2 |= MMCR2_FCP(pmc);
if (pevents[i]->attr.exclude_hv)
mmcr2 |= MMCR2_FCH(pmc);
if (pevents[i]->attr.exclude_kernel) {
if (cpu_has_feature(CPU_FTR_HVMODE))
mmcr2 |= MMCR2_FCH(pmc);
else
mmcr2 |= MMCR2_FCS(pmc);
}
if (pevents[i]->attr.exclude_idle)
mmcr2 |= MMCR2_FCWAIT(pmc);
if (cpu_has_feature(CPU_FTR_ARCH_31)) {
if (pmc <= 4) {
val = (event[i] >> p10_EVENT_MMCR3_SHIFT) &
p10_EVENT_MMCR3_MASK;
mmcr3 |= val << MMCR3_SHIFT(pmc);
}
}
hwc[i] = pmc - 1;
}
/* Return MMCRx values */
mmcr->mmcr0 = 0;
/* pmc_inuse is 1-based */
if (pmc_inuse & 2)
mmcr->mmcr0 = MMCR0_PMC1CE;
if (pmc_inuse & 0x7c)
mmcr->mmcr0 |= MMCR0_PMCjCE;
/* If we're not using PMC 5 or 6, freeze them */
if (!(pmc_inuse & 0x60))
mmcr->mmcr0 |= MMCR0_FC56;
/*
* Set mmcr0 (PMCCEXT) for p10 which
* will restrict access to group B registers
* when MMCR0 PMCC=0b00.
*/
if (cpu_has_feature(CPU_FTR_ARCH_31))
mmcr->mmcr0 |= MMCR0_PMCCEXT;
mmcr->mmcr1 = mmcr1;
mmcr->mmcra = mmcra;
mmcr->mmcr2 = mmcr2;
mmcr->mmcr3 = mmcr3;
return 0;
}
void isa207_disable_pmc(unsigned int pmc, struct mmcr_regs *mmcr)
{
if (pmc <= 3)
mmcr->mmcr1 &= ~(0xffUL << MMCR1_PMCSEL_SHIFT(pmc + 1));
}
static int find_alternative(u64 event, const unsigned int ev_alt[][MAX_ALT], int size)
{
int i, j;
for (i = 0; i < size; ++i) {
if (event < ev_alt[i][0])
break;
for (j = 0; j < MAX_ALT && ev_alt[i][j]; ++j)
if (event == ev_alt[i][j])
return i;
}
return -1;
}
int isa207_get_alternatives(u64 event, u64 alt[], int size, unsigned int flags,
const unsigned int ev_alt[][MAX_ALT])
{
int i, j, num_alt = 0;
u64 alt_event;
alt[num_alt++] = event;
i = find_alternative(event, ev_alt, size);
if (i >= 0) {
/* Filter out the original event, it's already in alt[0] */
for (j = 0; j < MAX_ALT; ++j) {
alt_event = ev_alt[i][j];
if (alt_event && alt_event != event)
alt[num_alt++] = alt_event;
}
}
if (flags & PPMU_ONLY_COUNT_RUN) {
/*
* We're only counting in RUN state, so PM_CYC is equivalent to
* PM_RUN_CYC and PM_INST_CMPL === PM_RUN_INST_CMPL.
*/
j = num_alt;
for (i = 0; i < num_alt; ++i) {
switch (alt[i]) {
case 0x1e: /* PMC_CYC */
alt[j++] = 0x600f4; /* PM_RUN_CYC */
break;
case 0x600f4:
alt[j++] = 0x1e;
break;
case 0x2: /* PM_INST_CMPL */
alt[j++] = 0x500fa; /* PM_RUN_INST_CMPL */
break;
case 0x500fa:
alt[j++] = 0x2;
break;
}
}
num_alt = j;
}
return num_alt;
}
int isa3XX_check_attr_config(struct perf_event *ev)
{
u64 val, sample_mode;
u64 event = ev->attr.config;
val = (event >> EVENT_SAMPLE_SHIFT) & EVENT_SAMPLE_MASK;
sample_mode = val & 0x3;
/*
* MMCRA[61:62] is Random Sampling Mode (SM).
* value of 0b11 is reserved.
*/
if (sample_mode == 0x3)
return -EINVAL;
/*
* Check for all reserved value
* Source: Performance Monitoring Unit User Guide
*/
switch (val) {
case 0x5:
case 0x9:
case 0xD:
case 0x19:
case 0x1D:
case 0x1A:
case 0x1E:
return -EINVAL;
}
/*
* MMCRA[48:51]/[52:55]) Threshold Start/Stop
* Events Selection.
* 0b11110000/0b00001111 is reserved.
*/
val = (event >> EVENT_THR_CTL_SHIFT) & EVENT_THR_CTL_MASK;
if (((val & 0xF0) == 0xF0) || ((val & 0xF) == 0xF))
return -EINVAL;
return 0;
}