MIRRORS/meta-freescale-3rdparty
1
0
Fork 0
mirror of https://github.com/Freescale/meta-freescale-3rdparty.git synced 2025-07-19 12:09:01 +02:00
Code Issues Actions 1 Packages Projects Releases Wiki Activity

imx6sl-warp: Add machine definition

Browse Source 
The WaRP Board is a Wearable Reference Plaform. The board features:

 - Freescale i.MX6 SoloLite processor with 512MB of RAM
 - Freescale FXOS8700CQ 6-axis Xtrinsic sensor
 - Freescale Kinetis KL16 MCU
 - Freescale Xtrinsic MMA955xL intelligent motion sensing platform

The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.

For more information about the project, visit:

 http://www.warpboard.org/

The machine configuration file used to include Yocto Project support to the
board is a consolidation work only.

It only reflects the work done in Linux kernel, U-Boot and FSL Community BSP,
where the hard work is actually done.

Change-Id: I3ef13f7c0959aa3a62b70ca46c7bf79a2cc5b2ed
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This commit is contained in:
Daiane Angolini 2015-02-26 12:23:44 -03:00 committed by Otavio Salvador
parent a6a34b4f9e
commit 5fadb641df
1 changed files with 38 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
conf/machine/imx6sl-warp.conf Normal file
View File

@ -0,0 +1,38 @@
#@TYPE: Machine
#@NAME: WaRP
#@SOC: i.MX6SL
#@DESCRIPTION: Machine configuration for i.MX6SL WaRP board.
#@MAINTAINER: Otavio Salvador <otavio@ossystems.com.br>
#Warp has an eMMC that stores the bootloader, kernel and rootfs.
#An easy way to flash the generated <image>.sdcard image is
#following these steps:
#
# 1.Connect the serial to USB adapter from Warp to the host PC
# 2.Connect the USB OTG Warp port to the host PC
# (Warp can be powered via USB OTG port).
# 3.In the U-boot prompt type:
# => ums 0 mmc 0
# 4.Then the Warp eMMC will be mounted as a USB gadget in the host PC
# 5.On the host PC, copy the generated .sdcard image into Warp's eMMC:
# $ umount /dev/<ums-device>
# $ sudo dd if=<image>.sdcard of=/dev/<ums-device>
#
#WARNING: Double check by running dmesg on the host PC which is the
#correct node that corresponds to the Warp board. Passing an incorrect
#device number may overwrite the host PC file system, causing boot issues there.
include conf/machine/include/imx-base.inc
include conf/machine/include/tune-cortexa9.inc
SOC_FAMILY = "mx6:mx6sl"
# Use eMMC boot partition by default
IMAGE_BOOTLOADER ?= ""
UBOOT_MACHINE ?= "warp_defconfig"
PREFERRED_PROVIDER_virtual/kernel ?= "linux-fslc"
KERNEL_DEVICETREE = "imx6sl-warp.dtb"
SERIAL_CONSOLE = "115200 ttymxc0"