mirror of
https://github.com/Freescale/meta-freescale-3rdparty.git
synced 2025-07-19 20:19:01 +02:00
u-boot-boundary, u-boot-script-boundary: Bump revision to cf2b52b5d9
This bumps the U-Boot and its corresponding script recipes, for Boundary Devices, to current stable release. It has a number of commits which are quoted below: d4aa4cce1f7 nitrogen51_vm: change I2C2 pullup to 47K f0731093dd0 nitrogen51_vm: add OKAYA_480_272 support 9cbdb79a32f ys: initial addition, Boundary Devices board b8a7b0c0a0b phy: enable auto-negotiate with software reset 3cad300c792 bt.h: use BD_CMA to specify cma= on cmd_line be6a9d8d37c crm_regs: add define for CCM_CCGR7 e76a593aade nitrogen6sx: set usb_ether mac properly 9ccd9a96ad8 lshore: add missing wlmac address setup 21ec9c565f6 6x_bootscript-mainline: add support for BD070LIC2 876e1a7e0e4 nitrogen6sx: fix missing clock enable for FEC1 3aa9b6eee34 fbpanel: use FB_COUNT instead of hardcoded 4, it is 5 now 84b5524eecc nitrogen6_max: add retries for i2c write failures d3932a38898 fbpanel: fix cmd_lvds2 when lvds2 is primary cde232f5640 nitrogen6_som2: add nitrogen6_som2_s1g_defconfig 8f2eb9cd133 nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 for LVDS2 as well 3d8689f9671 acl: initial addition, Boundary Devices board e34370a6b4e nitrogen6_max: add gt911 touch controller if serializer detected f260b0435d0 nitrogen6sx: add select MX6SX to Kconfig so that ROM_UNIFIED_SECTIONS is properly selected 564a13998e8 nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 5c9688ac256 fbpanel.h: add VD_TFC_A9700LTWV35TC_C1 b2c0c5170a5 mx5: soc: use iim_srev to detect TO3 e0dc8ac3dba mx5: lowlevel_init: use iim srev instead of undocumented register 40c6ef96ad7 mx5: lowlevel_init: add macro orr_mx51_tape2_or_lower 870a24137ec mx5: lowlevel_init: merge mx51/mx53 code 6000a279a20 mx5: lowlevel_init: use parameters for init_aips/init_m4if ff17737017b mx5: lowlevel_init: invalidate L1 cache 9565e071927 mx5: lowlevel_init: add erratum 709718, aips change to allow devregs to work 2ebd038eb42 mx5: lowlevel_init: pll startup change 2f62ea7ce99 mx5: imx-regs fix DP_OP_216 3d5cc7df8bf mx5: lowlevel_init: prevent glitches ff971e4fff8 mx5: lowlevel_init: use \r_plln 2317e212690 mx5: lowlevel_init: use macro divisor_change_wait 26de5cc68f7 mx5: lowlevel_init: use \r_ccm where CCM addresses are referenced 05fc9dc6076 mx5: lowlevel_init: use \r_zero for r4 6d5affbfbda mx5: lowlevel_init: minor cleanup of init_l2cc 9677253036b mx5: lowlevel_init: Turn on internal oscillator 8e727836532 mx5: lowlevel_init: disable IPU handshake for i.mx53 88e0baed772 6x_bootscript-yocto-3.14.txt: add run cmd_lcd2 2797b9eb8e2 6x_bootscript-ubuntu-3.14.txt: add run cmd_lcd2 1ccd3f6741f 6x_bootscript-yocto-3.14.txt: add reset_cause 7e503ee4dde 6x_bootscript-ubuntu-3.14.txt: add reset_cause 04365fec48c 6x_bootscript-mainline.txt: add reset_cause 47438c927dd 6x_bootscript-mainline.txt: add loglevel 944a95b558e 6x_bootscript-yocto-3.14.txt: add loglevel 858415ec8ba 6x_bootscript-ubuntu-3.14.txt: add loglevel 04e51858efe net_upgrade*.txt: add i.mx51/i.mx53 support 60b263044f3 6x_bootscript*.txt: add i.mx51/i.mx53 support 67e57440058 6x_upgrade.txt: add mx51 support 24fc7fb0cff nitrogen51_vm: initial addition ac115c6cd24 boundary: add cma= option 2094c6c194c boundary: add loglevel= environment variable ec049bb3226 iomux-mx51.h: add MX51_PAD's for nitrogen51_vm daf3771beeb boundary: allow override of CONFIG_SF_DEFAULT_CS, make fastboot conditional on CONFIG_CI_UDC 2303f1649ef mmc: add more prints if CONFIG_MMC_TRACE 38d0cb55532 fsl_esdhc: add print on timeout 0b08d4f71a2 fbpanel: add FB_LCD2 for imx51 support 13a104a55fe configs: boundary: add imx51 specifics 6fb31fe2b42 mx5: clock: add get_pll3_clock 850c0423219 mx5: soc: add CONFIG_IIM_MAC_ADDR_INDEX option 06ab77a56e8 mxc_i2c: add I2C_PADS_INFO_CPU for imx51 79dde89cf15 iomux-v3: add IOMUX_PAD_CTRL for imx51 0abcfcb1f3f ipu_disp: add set_bit_ so that mx51evk links d9cf0d43abb fbpanel.h: add VD_800X300_565 ed6fb265137 fbpanel: make sure to disable lcd node 179f519e4c0 Revert "mtp: change drive strength for spi nor to cleanup signals" e598f147059 ta: add TM070JDHG30 tianma panel 802adfafc2c 6x_bootscript-mainline: switch to new panel naming 4ec3c01faf6 hp: add hp_s512m_defconfig 1cef05812f1 hp: initialize otg network always 63869b4930c fbpanel: create function reparent_lvds by moving code 0de6bf20ea6 fbpanel: only change ldb that is needed and follow EB821 closer 41f9d742264 mtp: change drive strength for spi nor to cleanup signals eff504504a4 6x_bootscript-mainline: update for new display configuration 085adc691b1 nitrogen6_som2: add 4GB 6QP version 7e2d42d4541 nitrogen6_som2: declare TC358743 interrupt as input 5b7f23993c6 nitrogen6_max: declare TC358743 interrupt as input 11a40dbf9eb nitrogen6x: declare TC358743 interrupt as input 50792ca7c47 mtp: s/PAD_CTL_DSE_90ohm/PAD_CTL_DSE_80ohm/ to fix compile error 48397d6bbab nitrogen6_som2: add nitrogen6_som2_s512m_defconfig 18410a11097 nitrogen6q_som2: rename some cfg files 069f21abe72 mtp: change i2c drive strength to avoid undershoot d97a3590524 cnt: fix boot devs configuration 1ac271099a4 ta: no functional change, separate sd3/sd4 pad settings 6d308c573aa nitrogen6_vm: change sdcard drive strength(partial revert) d886449bce2 vp: add CONFIG_SPI_FLASH_SPANSION 34986328ab3 utc: add CONFIG_SPI_FLASH_SPANSION 70a22fba3d8 usd: add CONFIG_SPI_FLASH_SPANSION 570ed2ee184 ta: add CONFIG_SPI_FLASH_SPANSION 48bb77bc9be sp: add CONFIG_SPI_FLASH_SPANSION 09f42137f89 snap: add CONFIG_SPI_FLASH_SPANSION f013cc37b29 s: add CONFIG_SPI_FLASH_SPANSION 657c579277f rc: add CONFIG_SPI_FLASH_SPANSION 1ed9f0d0e2b per: add CONFIG_SPI_FLASH_SPANSION e68dac99b25 oc: add CONFIG_SPI_FLASH_SPANSION 91da7c260a9 nw: add CONFIG_SPI_FLASH_SPANSION 9d78eb3758c nitrogen7: add CONFIG_SPI_FLASH_SPANSION a44ca9e853d nitrogen6sx: add CONFIG_SPI_FLASH_SPANSION e0b0907a4b6 nitrogen6_som2: add CONFIG_SPI_FLASH_SPANSION 006d092bea9 nit6xlite: add CONFIG_SPI_FLASH_SPANSION 1144306e04b mx6_r: add CONFIG_SPI_FLASH_SPANSION 5d50cae139d mtp: add CONFIG_SPI_FLASH_SPANSION cc105f12d54 med: add CONFIG_SPI_FLASH_SPANSION 0fbd8b073be mcs: add CONFIG_SPI_FLASH_SPANSION cd0f943f65a lshore: add CONFIG_SPI_FLASH_SPANSION 9e92731434c ls: add CONFIG_SPI_FLASH_SPANSION 79d3866dbac jlm: add CONFIG_SPI_FLASH_SPANSION a3cf8d09596 ioc: add CONFIG_SPI_FLASH_SPANSION 5890b8f08a2 insp: add CONFIG_SPI_FLASH_SPANSION 9554ba32f09 h: add CONFIG_SPI_FLASH_SPANSION 64147c73a26 hp: add CONFIG_SPI_FLASH_SPANSION 31e290acc4e h4: add CONFIG_SPI_FLASH_SPANSION 4da54b4548e eo: add CONFIG_SPI_FLASH_SPANSION a4c45db4db0 dash: add CONFIG_SPI_FLASH_SPANSION 25d2dd5f357 cob: add CONFIG_SPI_FLASH_SPANSION 0e561da8823 cnt: add CONFIG_SPI_FLASH_SPANSION 0067da2223b cad: add CONFIG_SPI_FLASH_SPANSION 7f9fcfe5df3 bt2: add CONFIG_SPI_FLASH_SPANSION c1ff99ce870 bt: add CONFIG_SPI_FLASH_SPANSION 00e87792942 ash: add CONFIG_SPI_FLASH_SPANSION 548be920b23 a: add CONFIG_SPI_FLASH_SPANSION 216208c9e08 nitrogen6_vm: add CONFIG_SPI_FLASH_SPANSION b208c9db170 nitrogen6_max: add CONFIG_SPI_FLASH_SPANSION 060c11e17a7 nitrogen6x: add CONFIG_SPI_FLASH_SPANSION 52d3ab1d2cb sf_params: S25FL116K can handle 4k erase sectors 124d520fa98 nitrogen6_vm: change sdcard drive strength b8ce3466180 nitrogen6sx: make more like Linux dts file c58fae8eb1c nitrogen6_max: add nitrogen6_max_dl4g_defconfig 48372d8d805 nitrogen6_max: add nitrogen6_max_dl2g_defconfig 3748d2a3550 nitrogen6_max: update comments in 1066mhz_4x512mx16.cfg bf5e304c9b7 nitrogen6_som2: fix PHY address mask b0e4961647c fbpanel: deglitch lvds clock dc5a05b2f4d ipu_disp: add timeout to wait for flip routine d4c925893b8 nitrogen7: add secure boot option 59f462be1e3 nitrogen6sx: add secure boot option 0ab5c83f84d nitrogen6_scm: add secure boot option 5396b784385 nitrogen6x: add secure boot option f06fbcda874 nitrogen6_vm: add secure boot option 157b6ab6696 nitrogen6_som2: add secure boot option 2305368a722 nitrogen6_max: add secure boot option 352f51f80db nit6xlite: add secure boot option 3082b043b0c boundary.h: add secure boot options 076a9cb9883 arm: imx-common: introduce back usec2ticks e9ed68406db arm: imx-common: add SECURE_BOOT option to Kconfig 4196510b0da fbpanel: add Sexp parsing (SPI/pre_enable/bus,addr/backlight period) f210971b999 nitrogen6x: s/board_enable_spi_rgb/board_pre_enable/ 7bf1681cf60 fbpanel: use board_pre_enable e8fabd81988 fbpanel.h: 10kHz backlight for ASIT500MA6F5D 1fa3bba2d4b nitrogen6x: add VD_KD024FM 692c9d3a43c fbpanel: add VDF_KD024FM cacfe5aa6a7 fdt: use be32_to_cpup when getting device tree value into variable 43d3fb4cebf ash: add EIM_EB2 for sd card power control f54c69912fd net_upgradeu_fs: initial addition 0a0309be807 net_upgradeu: remove offset and friends from environment a2f88f6166d net_upgrade_fs: restructure to avoid using exit b66aec73f88 mcs: add 6x_bootscript-ubuntu-3.14.txt c417f091036 mtp: add 2g config option 473f6da58ba net_upgrade_fs.txt: grab decompressed size from end of file 12f3113011d 6x_bootscript-*-3.14.txt: add support for m4 specific dtb 75299b88329 nitrogen7: add initial m4 support for FreeRTOS 976118b2bb1 nitrogen6_scm: update m4 support for FreeRTOS 582f3b6dc12 nitrogen6sx: update m4 support for FreeRTOS ce42e3cbd98 Revert "ENGR00315894-57 iMX6SX: Add M4 boot support at soc level" 4f42f0b64e3 Revert "ENGR00315894-56 CMD: Add new command "bootaux" to boot auxiliary core" a796b997470 Revert "ENGR00322860 iMX6SX: Add function to check M4 status before booting" ed95621fd51 vp: setup rgb_gpio_pads in board_early_init_f 5fd3676496f utc: setup rgb_gpio_pads in board_early_init_f 5d959ff5898 nitrogen6x: setup rgb_gpio_pads in board_early_init_f 32871fd5555 nitrogen6sx: setup rgb_gpio_pads in board_early_init_f 90d8ca8c9c5 nitrogen6_vm: setup rgb_gpio_pads in board_early_init_f 555e1493594 nitrogen6_som2: setup rgb_gpio_pads in board_early_init_f 2abecc8ca8f nitrogen6_scm: setup rgb_gpio_pads in board_early_init_f d9d0feab24d nitrogen6_max: setup rgb_gpio_pads in board_early_init_f fe5ed50b64f mx6_r: setup rgb_gpio_pads in board_early_init_f 7e0785ec737 lshore: rgb_gpio_pads should not depend on CONFIG_CMD_FBPANEL 2de579e05a9 jlm: setup rgb_gpio_pads in board_early_init_f 96edaf1318e ioc: setup rgb_gpio_pads in board_early_init_f 77f3f1eef2c insp: setup rgb_gpio_pads in board_early_init_f 86ffaa44f9e h4: setup rgb_gpio_pads in board_early_init_f 1943edfc70b h: setup rgb_gpio_pads in board_early_init_f 866b5dfa55f cob: setup rgb_gpio_pads in board_early_init_f 147907e52ba cad: setup rgb_gpio_pads in board_early_init_f 03be7ad1b02 bt2: setup rgb_gpio_pads in board_early_init_f 3fdfa566ba1 ash: GP_BSL_CB_ON_OFF default to low again b155a32963f nitrogen6sx: print ethernet phy name bc38c58f481 fbpanel: only reference lvds-channel@1 if (fb == FB_LVDS2) e11ec148795 nitrogen7: swap GPIO1_IO02/GPIO1_IO03, only CLK02 can be slow clock 7d74f3ca6da hp: add tx enable for rs485 0ecd2f9444e nit6xlite: increase sd card drive strength 1e72771a0f0 nit6xlite: setup remaining pins 134843018d1 hp: add VD_AFK1024600A02 3ad3cd470a9 fbpanel: add VD_AFK1024600A02 77eb38a8720 hp: initial addition, Boundary Devices board 4e8b94259ae nitrogen6_max: add nitrogen6_max_4gr0_defconfig for 4G rank0 a7a41242894 bt2: increase refresh rate for 4G-rank0 e9940907cff ash: add CONFIG_VIDEO_SKIP_VERSION 0cf83cbf932 cfb_console: add CONFIG_VIDEO_SKIP_VERSION 63b97f6aa66 ash: GP_BSL_CB_ON_OFF high, TX23D200_18 default dispay 39deb0a8b01 net_upgradeu.txt: MX25L6405D has 64k erase size a11053ce6b5 nitrogen7: add qspi-MX25L6405D d8777349baa 6x_upgrade.txt: MX25L6405D has 64k erase size 50613679561 nitrogen7_defconfig: add CONFIG_SPI_FLASH_MACRONIX b18d021ecea nitrogen7: allow 4 bit mode for winbond qspi chip fc803e8dbe4 nit6xlite: add splash screen support d541e011e5c 6x_bootscript-*-3.14.txt: set bootargs after importing environment variable, as it may reset bootargs 63a40ca20a7 boundary.h: increase fastboot buffer size 3da2362e059 nitrogen7: fix wlmac f668585d5cb 6x_bootscript-*-3.14.txt: s/enable_msi/disable_msi/ b0d9caca6e1 nitrogen7: add wlmac environment variable 9ee71d2be72 nitrogen7: add cmd_custom=echo to avoid upgrade message 6bfa839dbad net_upgradeu.txt: s/dhcp/tftp/ since ipaddr is already valid c00c2c0d345 net_upgrade_fs.txt: s/dhcp/tftp/ since ipaddr is already valid 9bd6e794beb 6x_bootscript-yocto-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi 996fcb7f2c9 6x_bootscript-ubuntu-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi 6b22f6e0d62 boundary: separate bootcmd so it can be overridden c88b07b5f93 nitrogen7: qspi-SST25VF016B: comment change 64952e4c384 nitrogen6_scm: initial addition, Boundary Devices board 8d4ad5af80e i2c: add CONFIG_SYS_I2C_MASK 07714294a0f a: call preboot_keys c4806b093db vp: use boundary.h 1e71a937f3c utc: use boundary.h 988c7eff8d6 usd: use boundary.h 55e21bda72f ta: use boundary.h e2327106ea9 sp: use boundary.h dcacaf7b6db snap: use boundary.h 5cb0b8d1a74 s: use boundary.h 4aa596403f8 rc: use boundary.h 6b5b3ad0e4b per: use boundary.h aa4848f2204 oc: use boundary.h 94dbb81eef5 nw: use boundary.h b6b6b0ce64c nitrogen7: use boundary.h 1785110ed16 nitrogen6x: use boundary.h cd9ff89b999 nitrogen6sx: use boundary.h 60732290a9e nitrogen6_vm: use boundary.h 57b208e6268 nitrogen6_som2: use boundary.h 6ea8e1182b7 nitrogen6_max: use boundary.h afb7083ace9 nit6xlite: use boundary.h b5c060a77f6 mx6_r: use boundary.h b50fa4727dc mtp: use boundary.h a94d7331856 med: use boundary.h 694833e08d9 mcs: use boundary.h d03b7c4def3 lshore: use boundary.h c82d3faded5 ls: use boundary.h 7e3984ed2cf jlm: use boundary.h 7a08933ddd6 ioc: use boundary.h 1b29f03020d insp: use boundary.h ed029b9d6ac h4: use boundary.h 78e32d217d3 h: use boundary.h 7f1bd666e39 eo: use boundary.h cc3bfe17611 dash: use boundary.h ed706954593 cob: use boundary.h 55cf2dfd68e cnt: use boundary.h 2d4a9e17835 cad: use boundary.h c06aed4b2c9 bt: use boundary.h 39bed41e298 ash: use boundary.h 535fd46eaa0 a: use boundary.h a8b39528e40 boundary.h: common include file initial commit 1a1a974997c cnt: preboot_keys is not defined, remove call c859f6ce412 vp: verify port in board_ehci_hcd_init c3240f915a4 utc: verify port in board_ehci_hcd_init 88309af334d sp: verify port in board_ehci_hcd_init 3887cbace3e s: verify port in board_ehci_hcd_init 0320ac76051 rc: verify port in board_ehci_hcd_init 5addcb8a8f9 oc: verify port in board_ehci_hcd_init 37f43a51975 nw: verify port in board_ehci_hcd_init 9647623b76c nitrogen6x: verify port in board_ehci_hcd_init ea527297b4a nitrogen6_som2: verify port in board_ehci_hcd_init 264bb9aac2d nitrogen6_max: verify port in board_ehci_hcd_init 7917c09b508 nit6xlite: verify port in board_ehci_hcd_init 1bee7aa09c0 mx6_r: verify port in board_ehci_hcd_init c673a5efbfc mcs: verify port in board_ehci_hcd_init f88f2149f99 jlm: verify port in board_ehci_hcd_init 7156705a0f2 ioc: verify port in board_ehci_hcd_init 94dd2515909 h: verify port in board_ehci_hcd_init eda1d4e0e24 dash: verify port in board_ehci_hcd_init a909f470030 cob: verify port in board_ehci_hcd_init 42507783d91 cnt: verify port in board_ehci_hcd_init ff3f9847077 a: verify port in board_ehci_hcd_init 5c01bde6021 lshore: add 800mhz_4x128mx16.cfg 1c63c1791f1 lshore: add lshore_dl_defconfig ea465e8ab89 lshore: fix DEFCONFIG lshore_solo_defconfig 3af660c1916 itw:remove 3fdd5f6f853 itw: remove 18e5da4daf5 utc: add wlmac d6a837868bd s: verify fuse blown before setting wlmac eb9f0012845 nitrogen6x: add wlmac 920b9ac465c nit6xlite: verify fuse blown before setting bd_addr ea0f4a79a49 nitrogen6x: add wlmac 15db4230150 nitrogen6_som2: add wlmac b92885f64ed nitrogen6_max: add wlmac db316528e02 nit6xlite: verify fuse blown before setting wlmac dd9a345a36a mtp: s/mac/mac_address/ for consistency ffbb65f7134 ls: add wlmac 91a8452a94a jlm: add wlmac 609f222a3bd ioc: add wlmac 532d38ff479 insp: s/mac/mac_addres/ for consistentcy 2343e7d45f8 eo: add wlmac 02eef251f4b bt2: add wlmac 18f923e7264 jlm: fix ISL29023 IRQ pin initialization 29e6d1b47fd nitrogen6x: ubuntu/yocto add bd_addr for bluetooth mac to 6x_bootscript 4426fb61f2c nit6xlite: add bd_addr bluetooth mac environment variable ecf1b4eb0a6 nw: add bd_addr environment variable for bluetooth mac c51912f1b50 nw: remove CONFIG_SYS_I2C_MXC_I2C3 f27f5bc17ec nw: nw does not have I2C3 1c7f3e37044 nw: fix compile error, add bluetooth pins 00630d9904d nw: set board nw2 for nw2 d2315e0de8c ash: use 800mhz for memory 9b2ff102da2 mx6_r: use VDF_LB043 501c8a53234 mcs: use VD_LD101WX1 e57bcda6cd9 cad: use VDF_SPI_QVGA 6017b4b001f nitrogen6sx: LCD should not use FBF_MODESTR cedc6ba7810 fbpanel.h: add VDF_ macros 5be7bec40f1 lshore: fix default environment e53f780549e cfb_console: display version before drawing the logo 901c39d0e3a Revert "ash: delay 150 usec after releasing phy reset" 3d0f7f5c589 ash: delay 150 usec after releasing phy reset 242a7e551b9 lshore: initial addition, Boundary Devices board 32cb5bc3daf sf_params: add IS25WP032/64/128 c6a2d6d7e95 spi: Kconfig: add SPI_FLASH_ISSI 35e80a05818 ash: default uart1 to rs232 41ce5fc45b2 sf-uclass: add spi_dataflash driver option 4a4b09bc47d nitrogen6sx: use _detect directly 23acee9e0dd mcs: pass fbp_detect_gpio 45e6b8bd0b9 nitrogen6x: net_upgrade_fs.txt initial addition dd575043d6e nitrogen6x: net_upgradeu.txt initial addition 022b632af1a itw: update comments 19c585e8dfa fbpanel: VD_INNOLUX_WXGA_14IN_12V/VD_OSD_WSVGA are 18 bit panels d4df92fde35 fbpanel: OSD-WSVGA is JEIDA ad1506e83d4 itw: update splash support bd05d40d6bc splash_source: fix gzip and raw storage checks 62fa1f96c4c itw: displays update a805c5bcfbb fbpanel: use _detect as function, add itw panels 3ef80052498 vp: explicit fbp_detect_i2c c6ce43a86e5 utc: explicit fbp_detect_i2c f474a381c91 usd: explicit fbp_detect_i2c dde1af9a795 ta: explicit fbp_detect_i2c cd740dc4e7d sp: explicit fbp_detect_i2c 0801f74e38a s: explicit fbp_detect_i2c 89eadc1a8e6 rc: explicit fbp_detect_i2c 1e51fdf51ee per: explicit fbp_detect_i2c 2923cd9682b oc: explicit fbp_detect_i2c 74fb2c51c40 nw: explicit fbp_detect_i2c 0d35569b83f nitrogen6x: explicit fbp_detect_i2c b224f04a501 nitrogen6sx: explicit fbp_detect_i2c 09a78a6fb1c nitrogen6_vm: explicit fbp_detect_i2c 7d02ad269a3 nitrogen6_som2: explicit fbp_detect_i2c 7a678af866c nitrogen6_max: explicit fbp_detect_i2c 8ecde109d5b nit6xlite.c: explicit fbp_detect_i2c 1183bf07c36 mx6_r: explicit fbp_detect_i2c bce5449ec8b med: explicit fbp_detect_i2c c4e21b430be mcs: explicit fbp_detect_i2c febd21e512d ls: explicit fbp_detect_i2c c35ad4d216a jlm: explicit fbp_detect_i2c c6e902dbdc9 ioc: explicit fbp_detect_i2c ce106df02bb insp: explicit fbp_detect_i2c 9c069b1f997 h4: explicit fbp_detect_i2c 10ac86008f7 h: explicit fbp_detect_i2c 7a36c93d10e eo: explicit fbp_detect_i2c 4ce81635e44 dash: explicit fbp_detect_i2c 9f02dce7e0f cob: explicit fbp_detect_i2c cee11fe74f3 cnt: explicit fbp_detect_i2c 115114c3ac6 cad: explicit fbp_detect_i2c c7086c03c1f bt2: explicit fbp_detect_i2c 8db523532cb bt: explicit fbp_detect_i2c 6a7305db1d5 ash: explicit fbp_detect_i2c 44a5b1590e0 mcs: remove redundant CONFIG_CMD_GPIO 6385b6bd7b0 a: remove redundant CONFIG_CMD_GPIO c89f87a871a itw: ddr calibration 24f2e534d2a itw: has hdmi input, not camera 9135e5d71d3 itw: use modestr for lcd fcaccf579c4 fbpanel.h: add VD_INNOLUX_WVGA_M cad087a826a itw: LCD is also VD_INNOLUX_WVGA b147ad9c154 itw: add 300Hz 50% pwm for LVDS panels 99ee39a68c0 fbpanel: disable lvds-channel@n if not used 7ce849cef04 itw: renames mostly 72b6da756b7 itw: turn leds off e1ed1e3ba31 itw: fix backlight power control 45dc34881f1 itw.h: make more like nitrogen6x.h a78df29bdea nitrogen6_max.h: make more like nitrogen6x.h 64f77e1b524 nitrogen6x: spacing changes in environment variables cc84a1067b4 itw: add hdmi panels 79a15949c86 fbpanel: add LVDS2 individual panel support ca9cb513e2b crm_regs: add CHSCCDR_CLK_SEL_LDB_DI1 8ec9f5689a8 itw: uses ATHEROS phy AR8035 7df8db0d4ed itw: GP_CPU_RESET is active high, so set low 0c5bb92facb itw: add itw_1g_defconfig b57e32f1e40 nitrogen7: qspi-W25Q128BV initial addition 769d3f63b62 qspi-SST25VF016B: rename, increase to 76 Mhz a80fba2a9fd 6x_upgrade.txt: use sfname to burn correct qspi paramter file f599bcc5e09 spi_flash: add env variable sfname 660fd0725ce 6x_upgrade: add qspi file checks size/tag Change-Id: I54d0642351aecbcf7105963d8cb81165a1e94323 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This commit is contained in:
Fabio Berton
Otavio Salvador
parent
34be6fbc2c
commit
ca3b9fb496
|
|
@ -9,7 +9,7 @@ PROVIDES = "u-boot"
|
|||
|
||||
PV = "v2016.03+git${SRCPV}"
|
||||
|
||||
SRCREV = "43467b8804f1c61a7f15db15769641b15c8a6502"
|
||||
SRCREV = "d4aa4cce1f7fbd5df8e2cac72996826a8a096dac"
|
||||
SRCBRANCH = "boundary-v2016.03"
|
||||
SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;branch=${SRCBRANCH}"
|
||||
|
||||
|
|
|
|||
|
|
@ -4,7 +4,7 @@ DEPENDS = "u-boot-mkimage-native"
|
|||
|
||||
PV = "v2016.03+git${SRCPV}"
|
||||
|
||||
SRCREV = "43467b8804f1c61a7f15db15769641b15c8a6502"
|
||||
SRCREV = "d4aa4cce1f7fbd5df8e2cac72996826a8a096dac"
|
||||
SRCBRANCH = "boundary-v2016.03"
|
||||
SRC_URI = "git://github.com/boundarydevices/u-boot-imx6.git;branch=${SRCBRANCH}"
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue
Block a user