The 3.10 kernel is not supported anymore so it need to be upgraded, if
the realtime kernel is still needed. For now, remove the kernel recipe
as it is clearly not in use.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The machine header could use some work to properly describe the board
and its compatibility. Mainly it works with Quad and DualLite type of
SoCs and in reality it is the evaluation board of the SoM.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The u-boot-fslc now includes the SPl support for the cgtqmx6 SoM
devices avoiding the need of part number setting for build.
This patch rework the machine file to use the u-boot-fslc recipe and
remove the old u-boot-congatec one, which becomes unused.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
A bug persisted when building this as the location didn't exist. Fix it.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Bump Gateworks u-boot version to gateworks_v2015.04.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Bump gateworks kernel from gateworks_3.10.17_1.0.0_ga to
gateworks_fslc_3.14_1.0.x_ga, which includes patches to fix building with
GCC 5.2. The gateworks_fslc_3.14_1.0.x_ga branch is based off of
linux-fslc-3.14-1.0.x-mx6 from commit 966457723b6d74a65e21c05355b35ff22faa4ad4.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Because various boards use various flash sizes, build the two sizes fit for
Ventana boards.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Comment the usage within this machine conf for the two aforementioned variables.
For boot, we require the kernel, dtbs, and bootscript. We also require the sky2
module for use of an Ethernet device, but is not req'd for boot so place it
into MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reorganize file and replace tabs with spaces.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This updates the linux-congatec to an initial version based on
linux-fslc-mx6 fork. The kernel is based on 3.14.54 and includes all
3.14.28 GA release changes.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The linux-timesys is known to be broken using GCC 5.2, the OE-Core
default, and has been removed from the meta-fsl-arm making the
following boards kerneless.
This patch removes the following boards:
- pcl052
- pcm052
- quartz
In case someone intends to add those boards back, this commit can be
easily reverted.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This picks up the three patches for fixing kernel compilation
with gcc 5.2.
Signed-off-by: Matt Madison <matt@madison.systems>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
tc358743 support added to imx6q-nitrogen6x.dtb
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
New bootscript that supports all Boundary Device's current boards, including the Nitrogen6_SoloX, and their default DTBs.
Uses new u-boot fbpanel display detection.
See previous commit message for u-boot-boundary_git.bb for more detailed information.
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Adds support for Nitrogen6_SoloX board
Required u-boot version for 3.14.28 boundary kernel
Environment variables for display detection has changed
Environment variable "fbpanel" will display all supported displays
Then four variables control which panels you'd like to select:
fb_hdmi controls HDMI display selection
fb_lcd controls LCD display selection
fb_lvds controls LVDS display selection
fb_lvds2 controls LVDS2 display selection
Example selection:
setenv fb_hdmi 1280x720M@60
setenv fb_lcd CLAA-WVGA
setenv fb_lvds hannstar7
setenv fb_lvds2 hannstar
Defaults and more information can be seen here:
7bad84fd3c/arch/arm/imx-common/fbpanel.c (L17-L57)
Displays defined here:
https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2015.07/arch/arm/include/asm/imx-common/fbpanel.h
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Adds support for Boundary Device's Nitrogen6 SoloX board.
Board features and more information available at:
http://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Kernel based on 3.14.28-1.0.0 GA release
Removal of linux-boundary_3.10.53 kernel recipe
Main changes are graphics update to 5.0.11p4.5 and SoloX support
Uses defconfig which is universal to all current Boundary Devices boards
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update the Toradex kernel recipe to Linux 4.1. This kernel version
is based on the Toradex V2.5 Beta 1 release plus a NAND fix (hence
the versioned as v2.5b1.1).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update git revision to match the latest Toradex BSP release V2.5
Beta 1. The release is still based on upstream U-Boot 2015.04,
but introduced Cortex-M4 boot support (m4boot). Depending on the
module hardware this U-Boot versions also fixups the Linux device
tree to enable Suspend-to-Memory support (which needs hardware
revision 1.2 or later).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The mxs-base.inc include file has been consolidated inside the
imx-base.inc. This updates the 3rd party boards to use the new
imx-base.inc file and allow for them to keep working.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This reverts commit 5ee7d28984.
The Linux kernel version in use now all use the new Firmware filename
so we can remove the new alternatives and avoid appending the original
recipe.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The linux-fslc fork is based in mainline kernel and currently does not
offer support for the Vivante GPU kernel driver, so we need remove the
SoC family definition to avoid setting overrides which requires
Freescale kernel specifics.
The following machines has been change:
- imx6dl-riotboard
- imx6sl-warp
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Work around CPU stalls in the imx-sdma driver by replacing spinlocks
with raw spinlocks. This prevents preemption during the spinlock's
critical section, as is the case on non PREEMPT_RT kernels.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The new U-Boot 2015.07-based release offers support for SPL for
Wandboard. This allows the same image to run in every Wandboard
variant available.
This consolidates the Quad, Dual and Solo variants into a single
Wandboard machine definition.
Change-Id: Icf87301431b48ef857670e1f3a941706a7bfc50d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Add support for the Wandboard kernel with realtime patch applied.
This recipe is based on the current linux-wandboard recipe using the
3.14.28-1.0.0 GA branch.
The applied patches are taken from the linux-imx-rt recipe, and the
changes to the defconfig are analogous to those between linux-imx
and linux-imx-rt.
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Set EXTRA_IMAGEDEPENDS to "u-boot".
When user copies a .sdcard to the eMMC the bootloader is not updated, but it is
still helpful to generate a U-boot binary and be able to inspect U-boot source code.
The .sdcard image generated after this patch does not include the U-boot binary
which is only built to ease an eventual update.
See how-to override eMMC boot partition on the following link:
http://git.denx.de/?p=u-boot.git;a=blob;f=board/warp/README
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This brings the Wandboard's Linux 3.14.28 kernel to the latest
commit in github which bumps to 32 bits the HDMI's bit depth in
imx6qdl-wandboard.dtsi. This is needed by Weston in order to run
properly.
Signed-off-by: Alfonso Tamés <alfonso@tames.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Add an entry for cubox-i in order to fix the following build error:
ERROR: Nothing RPROVIDES 'bcm4329-nvram-config' (but /work/yocto/master/sources/poky/meta/recipes-core/packagegroups/packagegroup-base.bb RDEPENDS on or otherwise requires it)
ERROR: bcm4329-nvram-config was skipped: incompatible with machine cubox-i (not in COMPATIBLE_MACHINE)
Also add the brcmfmac4329-sdio.txt file for cubox-i.
Change-Id: I91797c9122c97b2e17b780c5b5f523f9aa4edae3
Reported-by: Peter Bergin <peter.bergin@tritech.se>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Updated Wandboard's recipes and defconfig to adopt the new 3.14.28
kernel (located at http://github.com/wandboard-org/linux.git) which
is based on Freescale's release.
Signed-off-by: Alfonso Tamés <alfonso@tames.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Provides the recipe and files to use the 3.14.28 Linux kernel
Signed-off-by: Alex de Cabo <alejandro.de-cabo-garcia@congatec.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This updates the forked MCC kernel module to latest version. The new
version correctly enables/disables the CPU2CPU interrupts during
critical sections. This fix needs two new symbols provided by the
kernel:
- mscm_enable_cpu2cpu_irq
- mscm_disable_cpu2cpu_irq
Both are provided by the Linux kernel provided by the linux-toradex
4.0 recipe.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update the Toradex kernel recipe to Linux 4.0. This kernel version
is based on the Toradex v2.4Beta1 release plus some fixes (hence
the versioned as v2.4b1.1). The updated kernel uses a new NAND ECC
format which is capable to fix up to 32 errors.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update to U-Boot 2015.04 which is part of the current version of the
Toradex BSP release v2.4Beta1. This version uses a new NAND ECC
format, hence it needs to be used with an updated Linux kernel too.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The first revisions of the micro-som had BCM4329 populated, so add
bcm4329-nvram-config to support Wifi on the older revision.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Remove extra blank lines in the end of the sdio.txt files.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Pass wifi, bluetooth and serial in MACHINE_FEATURES.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
