Like libmcc v1, move mqxboot 1.0 to meta-fsl-arm-extra. Also add
it to the preferred version for the colibri-vf machine. The library
has a distinct name (libmcc vs. libmcc2) and hence does not need
to be selected explicitly.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This commit adds a machine configuration for the Phytec phyCORE (pcm052) Vybrid
board.
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The machine header could use some work to properly describe the board
and its compatibility. Mainly it works with Quad and DualLite type of
SoCs and in reality it is the evaluation board of the SoM.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The u-boot-fslc now includes the SPl support for the cgtqmx6 SoM
devices avoiding the need of part number setting for build.
This patch rework the machine file to use the u-boot-fslc recipe and
remove the old u-boot-congatec one, which becomes unused.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Because various boards use various flash sizes, build the two sizes fit for
Ventana boards.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Comment the usage within this machine conf for the two aforementioned variables.
For boot, we require the kernel, dtbs, and bootscript. We also require the sky2
module for use of an Ethernet device, but is not req'd for boot so place it
into MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reorganize file and replace tabs with spaces.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The linux-timesys is known to be broken using GCC 5.2, the OE-Core
default, and has been removed from the meta-fsl-arm making the
following boards kerneless.
This patch removes the following boards:
- pcl052
- pcm052
- quartz
In case someone intends to add those boards back, this commit can be
easily reverted.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
tc358743 support added to imx6q-nitrogen6x.dtb
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Adds support for Boundary Device's Nitrogen6 SoloX board.
Board features and more information available at:
http://boundarydevices.com/product/nit6_solox-imx6/
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The mxs-base.inc include file has been consolidated inside the
imx-base.inc. This updates the 3rd party boards to use the new
imx-base.inc file and allow for them to keep working.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The linux-fslc fork is based in mainline kernel and currently does not
offer support for the Vivante GPU kernel driver, so we need remove the
SoC family definition to avoid setting overrides which requires
Freescale kernel specifics.
The following machines has been change:
- imx6dl-riotboard
- imx6sl-warp
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The new U-Boot 2015.07-based release offers support for SPL for
Wandboard. This allows the same image to run in every Wandboard
variant available.
This consolidates the Quad, Dual and Solo variants into a single
Wandboard machine definition.
Change-Id: Icf87301431b48ef857670e1f3a941706a7bfc50d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Set EXTRA_IMAGEDEPENDS to "u-boot".
When user copies a .sdcard to the eMMC the bootloader is not updated, but it is
still helpful to generate a U-boot binary and be able to inspect U-boot source code.
The .sdcard image generated after this patch does not include the U-boot binary
which is only built to ease an eventual update.
See how-to override eMMC boot partition on the following link:
http://git.denx.de/?p=u-boot.git;a=blob;f=board/warp/README
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ian Coolidge <ian@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Updated Wandboard's recipes and defconfig to adopt the new 3.14.28
kernel (located at http://github.com/wandboard-org/linux.git) which
is based on Freescale's release.
Signed-off-by: Alfonso Tamés <alfonso@tames.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The first revisions of the micro-som had BCM4329 populated, so add
bcm4329-nvram-config to support Wifi on the older revision.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Pass wifi, bluetooth and serial in MACHINE_FEATURES.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The WiFi chip installed in the board is the Broadcom 4330, so provide
the proper nvram config and firmware to enable Wifi by default.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
There is no need for the extra space in the name of the nvram config file,
so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
There is no need to have 'wifi' and 'bluetooth' entries twice in
MACHINE_FEATURES, so remove the duplicate occurrances.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Several Yocto images fail to build because they're using packages that require
imx6-specific hardware support (ASRC, VPU, GPU3D), which is not available in
the mainline kernel. This patch fixes the following image builds:
- core-image-minimal
- core-image-base
- fsl-image-multimedia
- fsl-image-multimedia-full
- fsl-image-machine-test
Change-Id: I7be8b82216e7be014af09a5828e424c882bcd2f7
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The WiFi chip installed in the board is the Broadcom 4330, so we ought
to provide the proper nvram config and firmware to enable the board to
proper support the WiFi.
Change-Id: I4d5ed031edb28a79c033098d23eedc642cccc7e0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
The linux-firmware-ath6k is not necessary for the board to work and
adds no features for standard users, drop it.
Change-Id: I8b4d6eb94564f0e92abb6d9630fc3cf765b8fa8c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
The UBOOT_ENTRYPOINT is duplicated from imx-base.inc. Drop it.
Change-Id: Ibd6f65f2b454206391249f7630d6fd1dc214e6f7
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
The U-Boot FSLC fork now has support for both HummingBoard and Cubox-i
boards. It supports booting them in all supported variants relying on
SPL to detect the board, CPU and memory.
Change-Id: I19efc6f7dadb8055b9e29b540275d319aefc303f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Set virtual/bootloader preferred provider to u-boot-gateworks-imx.
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Add a machine conf for the Gateworks Ventana product
family. For more information, please see the product site at
http://www.gateworks.com/product#ventana
Change-Id: I00954787e33b11fee7c422a111160b77eae1591f
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Add cm-fx6 machine configuration: u-boot and kernel.
The cm-fx6 is a CompuLab CoM. The board features:
-- Freescale i.MX6 single/dual/quad-core Cortex-A9 @1GHz-1.2GHz
-- Up to 4GB DDR3 and up to 32GB on-board SSD storage
-- Integrated GPU and 1080p VPU, dual display support
-- WiFi, BT 3.0, GbE, PCIe, SATA, USB x5, UART x5, CAN x2
For more information visit:
http://www.compulab.co.il/products/computer-on-modules/cm-fx6http://www.compulab.co.il/utilite-computer/web/utilite-models
Signed-off-by: Valentin Raevsky <valentin@compulab.co.il>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Due the possibility of generating several binaries, for U-Boot, the
build needs to be done out-of-tree however the build system of 2013.04
version was not ready for it. Apply a simple fix for the time being.
The out-of-tree mechanism is much more robust in more recent versions
of U-Boot however this is not an option for this set of boards at the
moment.
Change-Id: I3b80e8c07a41f66dd74465dc064bec4c040d853c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Boundary Devices does not currently offer a dual-lite or solo
processor option for Nitrogen6_Max, and the device tree for it
is not supported in kernel 3.10.53.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This adds a recipe for the forked version of the MCC kernel module. The
fork includes changes to compile and run the module with the 3.18 based
kernel provided by linux-toradex_3.18.bb.
The forked version requires the functionality of the SEMA4 and MSCM
CPU2CPU interrupts exported by the kernel through some Vybrid specific
symbols:
- mscm_request_cpu2cpu_irq
- mscm_free_cpu2cpu_irq
- mscm_trigger_cpu2cpu_irq
- mvf_sema4_assign
- mvf_sema4_deassign
Currently, those symbols are provided by the Toradex Linux kernel only
(linux-toradex_3.18.bb).
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The kernel used in WaRP is based on Linux mainline so the FSL-specific
headers does not exist. The removal here allow the machine to be build
without errors.
Change-Id: I8ba8e6790ab4c1aeaaae3c2ad129c3b434d40a83
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The two modules Colibri VF50 and Colibri VF61 are very similar,
with this generic machine called "colibri-vf" both modules are
supported. The bootloader default environment expects the Linux
kernel zImage as well as the device tree files to be located in
the /boot folder of the root file system. Use IMAGE_INSTALL on
the machine level to install them into the root file system by
default.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The dtb is also stored in the eMMC, so include it among the other items in the
text.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The WaRP Board is a Wearable Reference Plaform. The board features:
- Freescale i.MX6 SoloLite processor with 512MB of RAM
- Freescale FXOS8700CQ 6-axis Xtrinsic sensor
- Freescale Kinetis KL16 MCU
- Freescale Xtrinsic MMA955xL intelligent motion sensing platform
The board implements a hybrid architecture to address the evolving
needs of the wearables market. The platform consists of a main board
and an example daughtercard with the ability to add additional
daughtercards for different usage models.
For more information about the project, visit:
http://www.warpboard.org/
The machine configuration file used to include Yocto Project support to the
board is a consolidation work only.
It only reflects the work done in Linux kernel, U-Boot and FSL Community BSP,
where the hard work is actually done.
Change-Id: I3ef13f7c0959aa3a62b70ca46c7bf79a2cc5b2ed
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
