Update to latest commit on Boundary Devices U-Boot 2014.04 tree.
Notable updates include:
support for a number of new boards, including Nitrogen6 Max
fixes for boot scripts for Solo and Dual-Lite processors
fixes to support the use of RAM disks
additional LCD panels:
Ampire 1024x600 (Ilitek touch)
WVGA LVDS
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This is the new SolidRun supported kernel for the HummingBoard and
CuBox-i devices. It is based on the Linaro 3.14 kernel releases.
Some of the changes are:
* devicetree files are used now
* zImage is used instead of uImage
* large amounts of memory leak and stability fixes
* increased FEC ethernet performance, higher than the Freescale rated
470 Mbps
* SDHC patchset for better UHS-I support
* residue support for SDMA with FSL's custom firmware integrated to work
with HDMI and optical SPDIF
* higher DMA and GPU efficiency in general
* the vast array of improvements of a 3.14.14 kernel over a 3.0.35 one
Change-Id: I8f5292b3c2951e7fc48dd20e556da1beba092ed5
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This includes the following changes, the defconfig
changes are reflected in the yocto defconfigs to
keep things in sync.
Eric Nelson (39):
nit6xlite_defconfig: add LEDS_GPIO
sabrelite: configure ethernet PHY nRST
nitrogen6x: configure ethernet PHY nRST
nitrogen6_mtp: configure ethernet PHY nRST
nitrogen6_max: configure ethernet PHY nRST
nit6xlite: configure ethernet PHY nRST
nit6xlite: default to multi-touch input for eGalax, ft5x06
nitrogen6x: default to multi-touch input for eGalax, ft5x06
nitrogen6x_ub: default to multi-touch input for eGalax, ft5x06
ft5x06: free GPIO in _remove
ft5x06: add support for ABS_MT_TRACKING_ID
ft5x06: set MAX_TOUCHES to 12
ft5x06: respect/return tracking id from controller
net: fec: iMX6 FEC does not support half-duplex gigabit
nit*_defconfig: add CONFIG_USB_FUNCTIONFS=m
nit*_defconfig: add CONFIG_USB_SERIAL_GENERIC
nit6xlite: add ili210x touch controller
nitrogen6x: add ili210x touch controller
sabrelite: add ili210x touch controller
nitrogen6_max: add ili210x touch controller
nit6xlite_defconfig: add ILI210X touch screen
nitrogen6x_defconfig: add ILI210X touch screen
ili210x: Allow use with Device Tree
nitrogen6_max: enable FEC ethernet
nitrogen6_max: swap NANDF_CS0/1 (GP6:11/14) for SD3 voltage select, WL IRQ
nitrogen6_max: define ENET_TXD1 as GPIO1:29 for amplifier mute
flexcan: allow use with transceivers that only have standby pin
nitrogen6x: SDIO is 1.8V-only, add flag in DTS
sdhci: Allow platform_set_power callback
sdhci-imx: Add power-gpio support
nitrogen6x: use power-gpio instead of vqmmc-supply to control WL_EN pin
nitrogen6_max: use power-gpio instead of vqmmc-supply to control WL_EN pin
nitrogen6_max: configure voltage-select pin
nit6xlite: flag 1.8v quirk for vqmmc on sdhc2 (WiFi interface)
DT:imx6qdl: Pad SD2_DAT3 should have pull-down
nitrogen6x_defconfig: include LEDS_PWM, SPI_SPIDEV
Add imx6q-sabrelite-nolcd device tree
fec: Add disable_giga parameter to force 10/100 operation
Revert "DT:imx6qdl: Pad SD2_DAT3 should have pull-down"
Ranjani Vaidyanathan (1):
ENGR00318392 ARM:imx6x: Save/restore SCU and some CP15 registers across suspend/resume
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Simon Kuhnle <simon.kuhnle@methodpark.de>
Tested-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch updates the revision to a06fada55a.
Updates include added support for ramdisks.
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This fixes following warning, when building other mx5 boards:
,----
| WARNING: Unable to get checksum for linux-denx SRC_URI entry
| defconfig: file could not be found
`----
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Fixes:
WARNING: FILESEXTRAPATHS-variable, must always use _prepend (or _append)
type of assignment, and don't forget the colon.
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
When MACHINE was set to imx6qsabrelite no bootscript.txt was found.
Fix the same for the 6x_upgrade script while at it. There is only
one upgrade script shared by all boards, so use it independent of
the MACHINE.
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Tested-By: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-By: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
When using bitbake variables, overrides in bbappends are possible.
The embedded shell variables did not allow this.
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Reviewed-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The Layer index and the release notes script use the NAME field to
identify the boards supported. Add HummingBoard to the field.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Now that kernel 3.0.35 is no longer being updated, and that 3.10.17 is now GA and
supports current GPU libraries, remove linux-wandboard (3.0.35).
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Upstream changes to the brcmfmac driver require a change to the firmware
file names to match the devid and interface type of the Broadcom chipset.
This also makes it easier for one machine to support multiple chipets in
Yocto.
This patch has been changed to adapt to the linux-firmware version
used in Daisy branch which is based on an older version of linux-firmware
repository.
Signed-off-by: John Weber <rjohnweber@gmail.com>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The update to the Wandboard Linux kernel includes the following changes:
- wandboard_defconfig: Enable CONFIG_USB_OTG
- wandboard/dts: Fix USB OTG
- wand-rfkill: Change gpio depending on wandboard revision
- wandboard: dts: Add alternate pin support for rev C1
- brcmfmac: Use fw filename and nvram based of devid for sdio.
- wandboard: add revision detect pin to rfkill driver
- wandboard/dts: change EDM gpio to open drain
- wandboard/dts: Enable lcdif in devicetree
- wandboard/dts: add fusion touchscreen to devicetree
- wandboard: Fix bluetooth
- wandboard_defconfig: Enable support for Fusion touchscreen, Sunplus
keyboard, and some USB to serial devices.
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Upstream driver changes cause the driver to request firmware based on
the device ID (e.g. 4329, 4330). This also applies to the nvram config
file. Restructure the recipes and separate by chipset.
Modify conf/machine to use chipset-specific broadcom nvram packages
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update U-Boot revision to match u-boot-script-boundary to
keep them in sync and address breakage on the v2014.04-20140419
branch in Github.
For more details, see
http://lists.yoctoproject.org/pipermail/meta-freescale/2014-July/thread.html#9039
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Updates in this release include:
- Configures GPIOs on Nitrogen6_Lite as "gpio-led" devices
- Updates to nit6xlite_defconfig to match nitrogen6x_defconfig
- Added support for Okaya 480x272 display
- Allows concurrent operation of OV5640 MIPI and OV5642 parallel
cameras
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This fixes quoting in a setenv. The wrong quoting was
preventing the device from booting.
Signed-off-by: Christoph Settgast <christoph.settgast@methodpark.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch update the revision to 6fc170bb7b and corrects the following -
1. SUMMARY field. The kernel forks Boundary Devices BSP 4.1.0 but it's
Freescale BSP 4.1.0 as-is.
2. CONFIG_MACH_C1 becomes CONFIG_MACH_HB. Carrier-one was renamed to be HummingBoard.
3. Following two patches not needed anymore since they are part of the kernel -
0002-ARM-7668-1-fix-memset-related-crashes-caused-by-rece.patch
0003-ARM-7670-1-fix-the-memset-fix.patch
Change-Id: I34657245890dc4200592b58a6289ba90a7e9df2c
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch updates the revision to e313a3a86e.
Signed-off-by: Rabeeh Khoury <rabeeh@solid-run.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Various Freescale packages on the daisy branch require kernel
headers from 3.10.17, which breaks compatibility with 3.0.35 kernels.
Use the 3.10.17 branch as the default to allow more out-of-the box
build success.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
- Added TC358743 HDMI input driver (via MIPI)
- Fix RTC on nitrogen6x/6x-lite to kick-start on power-fail
- Fix UART3 baud-rate mismatch bug
- Update HDMI driver to default to "only CEA modes"
- Fix SGTL5000 issue with reboot
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
- Lots of additional (custom) boards
- Fixes for Focaltech ft5x06 touch screen (10-points now)
- RS-485 half-duplex and Rx/Tx LED support
- Added fake power-down to blank displays during power-off
- Added TC358743 HDMI input driver (via MIPI)
- Added GS2971 driver (via CSI)
- Fix RTC on nitrogen6x/6x-lite to kick-start on power-fail
- Fix UART3 baud-rate mismatch bug
- Update HDMI driver to default to "only CEA modes"
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update defconfig files for Boundary Devices' boards to include
- Updates for SystemD support
- Use 3G/1G split
- Add support for various USB->serial adapters
- Add g_mass_storage (=m)
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update defconfig files for Boundary Devices' boards to include
- Updates for SystemD support
- Use 3G/1G split
- Add support for various USB->serial adapters
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This kernel setting is required when using systemd >= 210. Without
it, no serial devices are enabled at boot time, making serial login
impossible.
Only tested on SabreLite (Nitrogen6x), but the same change should be
applied to all boards.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The SOC_FAMILY variable is a colon-separated list and
cubox-i had an extra colon.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The Nitrogen6x has options for i.MX6DL and i.MX6S, and
without mx6dl in the SOC_FAMILY, Dual-Lite/Solo features
of other components won't be built.
The problem triggering this patch is the firmware-imx package,
which will not install the Dual-Lite/Solo firmware for the
VPU (lib/firmware/vpu_fw_imx6d.bin).
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch updates the boot script for Boundary Devices
boards to sync with the U-Boot version.
The only functional change is commit c0508b4, which enables
boot from USB stick.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch updates U-Boot for Boundary Devices Nitrogen6x and
Nitrogen6_Lite boards to sync with the v2014.04 release from
up-stream.
This isn't a major release and upgrading isn't critical.
Release notes are on-line in this post:
http://boundarydevices.com/u-boot-2014-04-release-mx6/
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update Boundary Devices' linux kernel to one based on FSL's 3.10.17_1.0.0_ga
instead of 3.10.17_1.0.0_beta.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update Wandboard Linux kernel to one based on FSL's 3.10.17_1.0.0_ga. Also,
updated the defconfig to better align with FSL's imx_v7_defconfig where
possible to avoid potential problems
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This patch updates the revision to ed888a1e88 and corrects the
github URI , which should link to "SolidRun" instead of "rabeeh".
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Bump the revision to include a workaround for the USB phy issue we are
sometimes seeing.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This removes useless and very verbose debug that would appear e.g. while
plugging a USB stick.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The i.MX6 Solo is internally a i.MX6 Dual Lite but single core. This
uses the mx6dl as the SoC family as it is already being done in the
Kernel, U-Boot and Barebox.
Change-Id: If587097d9e3be35eadca27e67c11415a4fb0f1c1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
It can now be found on the original recipe's SUMMARY (on meta-fsl-arm).
Signed-off-by: Mario Domenech Goulart <mario@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Kernel version 3.10 requires lzop to build.
Fix suggested by Erik Botö <erik.boto@pelagicore.com>
Reported-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Replace DESCRIPTION to SUMMARY on linux recipes.
The SUMMARY content may be used in Release Notes to
describe the each kernel provider.
Add SUMMARY for linux-congatec, linux-cubox-i and
linux-timesys. For those, the SUMMARY used was the one
already in Release Notes [1] in file [2]
[1] https://github.com/Freescale/Documentation
[2] release-notes/source/kernel-linux.rst
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
The 3.10.17 version is added automatically by the build process,
so it's not needed in LOCALVERSION.
As Diego reported, without this patch, 'uname -r' and kernel modules
are oddly-named:
/lib/modules/3.10.173.10.17_beta+yocto
Reported-by: Diego <diego.ml@zoho.com>
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Move default kernel selection to 3.10.17 in advance of the 1.6 release,
because currently 3.0.35_4.0.0 is broken in master. There are known issues
with the kernel that will be resolved with community assistance. These
include:
- HDMI: Using X11 causes HDMI output to default to 1024x768 resolution
regardless of the 'video=mxcfb...' bootarg selection.
- HDMI, EDID: Does not work (but this did not work on 3.0.35 either).
- Sound, HDMI audio output: Using HDMI audio output seems to cause very slow
playback of both audio and video, and can be seen using aplay or
gst-launch.
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Update Wandboard 3.10.17 kernel to commit 4a8ad4, which includes an update
to the DTS to enable all mxcfb devices and a fix for the sgtl5000 driver.
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The machine needs to be included in the overrides list or
COMPATIBLE_MACHINE matching fails badly.
Change-Id: I52d717dd667c52cb3844c99fdfe25ab0c0c185d6
Reported-by: Omar Pighi <pighi@selea.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This commit adds a machine configuration for the Device Solutions Quartz Vybrid
board.
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This kernel is based on linux-timesys 3.0.15, and adds commits for quartz
support that include:
* Add Display and Resistive Touchscreen support
* Add Quartz Hardware Modules support
* Add additional UART support
* Update i2c settings for Audio driver
* New defconfig (i.e. quartz)
This kernel has been tested on the quartz platform.
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This branch adds some commits with board support for the quartz platform, that
include:
* Add NAND support
* Add Ethernet support
* Fix DDR3 settings for 1.1 silicon
* New machine definitions (e.g. quartz, quartz_nand)
This version has been tested on the quartz platform.
Change-Id: I63d73d7cfb15f4fe1044220a27d75858728cf617
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The following changes have been made in this version of the kernel:
* Fix for ethernet, which was previously not working.
Signed-off-by: Anthony Felice <tony.felice@timesys.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
