Add machine definition forimx6qdl-pico board.
For more information about this SOM, please visit:
https://www.technexion.com/products/pico-compute-modules/detail/PICO-IMX6
This machine definition support PICO-DWARF, PICO-HOBBIT, and PICO-NYMPH baseboards.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
The ConnectCore 6UL SOM contains a Qualcomm QCA6564A wireless and Bluetooth
chipset with the following features:
* Dual band 5GHz 802.11ac or 2.4/5GHz 802.11n support
* Open, WPA and WPA2 personal and enterprise authentication
* AES/TKIP encryption
* Station, softAP and Wi-Fi direct modes
* FCC compliant US regulatory domain support
* Bluetooth 4.2, backwards compatible with older standard revisions
This commit builds an out-of-tree driver for it as well as installs
firmware files for both Wi-Fi and Bluetooth.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCore 6UL Single Board Computer (SBC) Pro contains the
ConnectCore 6UL System-On-Module.
Its hardware specifications are:
* 256MB DDR3 memory
* On module 256MB NAND flash
* Dual 10/100 Ethernet
* USB Host and USB OTG
* Parallel RGB display header
* LVDS display header
* CSI camera
* GPIO header
* I2C, SPI, CAN headers
* PCIe mini card and micro SIM slot
* MicroSD external storage
* On board 4GB eMMC flash
* Audio headphone, line in/out, microphone lines
The build artifacts are:
U-Boot images: u-boot.imx
Linux partition image: <image name>.boot.ubifs
Root filesystem image: <image name>.ubifs
Root filesystem tarball (for network booting): <image name>.tar.bz2
To program a board from the U-boot prompt, copy the U-Boot, Linux and
root filesystem partition images to your TFTP server root and do:
env set ipaddr <target ip address>
env set serverip <TFTP server ip address>
update uboot tftp u-boot.imx
update linux tftp <image name>.boot.ubifs
update rootfs tftp <image name>.ubifs
More details about the SBC can be found at:
https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-pro
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
This commit prepares for the introduction of a second ConnectCore 6UL
System-On-Module based board by grouping the SOM configuration into its
own file avoiding code redundancy.
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
The ConnectCore 6UL Single Board Computer (SBC) Express contains the
ConnectCore 6UL System-On-Module.
Its hardware specifications are:
* 256MB DDR3 memory
* 256MB NAND flash
* Single Ethernet
* USB Host and USB-OTG
* MicroSD external storage
* Groove connectors and Raspberry Pi Hat compatible expansion heade
The build artifacts are:
U-Boot images: u-boot.imx
Linux partition image: <image name>.boot.ubifs
Root filesystem image: <image name>.ubifs
Root filesystem tarball (for network booting): <image name>.tar.bz2
To program a board from the U-boot prompt, copy the U-Boot, Linux and
root filesystem partition images to your TFTP server root and do:
env set ipaddr <target ip address>
env set serverip <TFTP server ip address>
update uboot tftp u-boot.imx
update linux tftp <image name>.boot.ubifs
update rootfs tftp <image name>.ubifs
More details about the SBC can be found at:
https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-express
The ConnectCore 6UL SBC Express includes a ConnectCore 6UL
System-On-Module with the following specification:
* Based on a NXP i.MX6UL SoC
* Industrial temperature ranges (-40ºC to +85ºC)
* Up to 1GB DDR3 memory
* Up to 2GB NAND flash
* Dual Ethernet
* On module 802.11 WiFi and Bluetooth 4.2 (QCA6564)
* On module NXP Kinetis KL03
* On module Microchip ATECC508A crypto element
More details about the SOM can be found at:
https://www.digi.com/products/embedded-systems/system-on-modules/connectcore-for-i-mx6ul
Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
I observed a following build issue:
| ***
| *** Can't find default configuration "arch/../configs/colibri_imx7_emmc_defconfig"!
| ***
| scripts/kconfig/Makefile:128: recipe for target 'colibri_imx7_emmc_defconfig' failed
it's due to the colibri_imx7_emmc_defconfig does not exist in the
source, because u-boot-toradex and u-boot-fw-utils are not built from
same source. so the toradex machine specific uboot configs do not
present in the default u-boot-fw-utils source.
To fix it, a new u-boot-toradex-fw-utils recipe is added, it uses the
same source with u-boot-toradex, some common code is split out to
u-boot-toradex.inc, to be shared by both u-boot-toradex and
u-boot-toradex-fw-utils.
And we need set PREFERRED_PROVIDER and PREFERRED_RPROVIDER in machine
configs to u-boot-toradex-fw-utils.
Some files derive from u-boot-toradex-fw-utils recipe of:
git://git.toradex.com/meta-toradex-nxp.git
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This adds the bcm4339 nvram configuration which allows the use of WiFi
connectivity out of box, using latest Linux FSLC release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested:
* HDMI
* MMC
* eMMC (mounted)
* NAND (kernel log - no partitions)
* RTC
* USB-Host
* Ethernet
* WiFi
* Bluetooth
* serial console
Open:
* HDMI sound
* Onboard sound (ALSA looks good has no phones connected yet)
* User-Button
* USB-OTG
Cannot test:
* CAN
Additional comments:
1. The way, the dt-files are copied into the kernel sources is not state of the
art. But since this is some work in progress it makes my worklow a lot easier.
2. My target is to send dt-files to mainline kernel but they are not yet ready
for that 'environment'. Once done I'll send backports to meta-fslc and 1.
can go.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
It is mx6 default but gets lost for use-mainline-bsp override:
In meta-freescale/conf/machine/include/imx-base.inc
MACHINEOVERRIDES_EXTENDER_FILTER_OUT_use-mainline-bsp contains
all mx6 variants. So all mx6.. overrides are are filtered which
is usually fine but not for DEFAULTTUNE: Without this patch
armv7hf-neon is build.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The MACHINE_FEATURES definition usually goes near the end of machine
file as it makes easier to compare the contents related to kernel,
bootloader and other general aspects of BSP.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The Toradex Colibri iMX6ULL computer module is based on i.MX 6ULL.
The Colibri iMX6 is a member of the pincompatible Colibri family.
They feature on module RAM and NAND, Ethernet PHY, Resistive Touch
Controller and optional Wi-Fi module.
For additional specifications please visit:
https://www.toradex.com/de/computer-on-modules/colibri-arm-family/nxp-imx6ull
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
imx-base.inc unconditionally sets SERIAL_CONSOLE to ttymxc0.
So assigning with ?= here to the same value does nothing and may
confuse if someone wants to assign to a different UART.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
The kernel class now sets RDEPENDS_${KERNEL_PACKAGE_NAME}-base, follow this in
the config files, otherwise bitbake emits a warning and the kernel isn't
removed.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
This updates to latest git which among others adds the new configurations
for Colibri iMX6ULL and moves to use a zImage kernel.
Change machine config to use zImage.
Also use 'older' 1.4.5 DTC which does not conflict with the fdt headers
used in U-boot.
The following commits since b121c6ab (minux non NXP related stuff):
eb660075db colibri-imx6ull: set module variant depending on config block
24db10ece3 tdx-cfg-block: simplify i.MX 6 module detection
bfe8950834 tdx-cfg-block: add support for new Colibri iMX6ULL SKUs
017ec39780 colibri_imx7_emmc: add fatwrite support
b5cc69a7e8 colibri-vf: use leveling evaluated by DDR validation tools
e2d5257acd colibri-vf: adjust timing according to data sheet
63d856627d ARM: vf610: ddrmc: do not write CR79 by default
743e081f34 ARM: vf610: ddrmc: fix CR138 preprocessor define
2881fc12d9 ARM: vf610: fix initialization completion detection
3ad050d4e4 arm: vf610: add UART2 pinmux/clock support
cd3e271cc5 colibri-imx6: added nreset gpio on reboot
addb87df8d cmd: ubi: print load size after establishing volume size
d507d86f8f cmd: set filesize variable in ubi read
9b02ad9e5d colibri-imx6ull: fix card detect GPIO of SD card
8890602daf colibri-imx6ull: Set the DDR RAM ASR bit
4c96a4f64d tdx-cfg-block: fix off by one issue
087e95a2dc colibri_t20: fix passing mac address via dt
a1c2045034 colibri_t20: integrate mtd partitions via dt
0940b3480a tools/env: allow equal sign as key value separation
0a9da66891 apalis/colibri_imx6: remove white space after string end
8a98158f8b script: Make the get_default_envs.sh script working with newest u-boot
d58b8057a7 colibri_vf_defconfig: enable MTD partitions via dt
04c6b570f7 arm: dts: imx7: add UART2/UART3
2fbebc49b5 apalis/colibri: switch to zimage
189e6ea804 tdx-cfg-block: add new SKUs
f05c11cd42 imx: initialize and use generic timer on i.MX 6UL/ULL
88b1209ca9 imx: introduce CONFIG_GPT_TIMER
e7a9e5a76b imx: move CONFIG_SYSCOUNTER_TIMER to Kconfig
393811db8e colibri-imx6ull: add MTD fixup compatible for mainline kernels
307a465108 colibri_imx7: do not mux SODIMM 169 as NAND chip select
30a1208727 apalis/colibri: disable undefined instruction events in user debug
980e216a8a colibri_imx6ull: add sensible default DFU configuration
af4cb91695 apalis/colibri: enable user debug by default
52259cf22a apalis: unify configs
48efc7c6be toradex apalis/colibri: set version variable for all modules
abec6c5697 colibri_imx6ull: add dtb for wifi variant
5e54aedd1c colibri_imx6ull.c: remove dead code
284ac523dd imx: imx6ull: correct get_cpu_speed_grade_hz
8d3bb7ea49 MLK-14839-2 imx: clean up print info for thermal and reset cause
1d4ece729e MLK-14839-1 mx6: Fix wrong CPU frequency
e2215315d9 envtools: make sure version/timestamp header file are available
19177c390e tools: env: allow to print U-Boot version
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
This reworks the machine configuration so:
- it uses a generic name, as it works with multiple baseboards;
- make use of extlinux configuration support
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
This updates the machine settings so it makes use of the SPL support
and also adds the extra machine U-Boot config, so it allows for a
direct booting in pico-pi baseboard if needed.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The U-Boot environment has been reworked to use the common distro
configuration, provided by UBOOT_EXTLINUX support.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
And switch to defconfig as now supported in v2017.07 release.
The missing virtual/bootloader variable was generating the following
error:
$ bitbake u-boot-boundary
...
ERROR: Nothing PROVIDES 'u-boot-boundary'
u-boot-boundary was skipped: PREFERRED_PROVIDER_virtual/bootloader set to u-boot-fslc, not u-boot-boundary
u-boot-boundary was skipped: incompatible with machine nitrogen6x (not in COMPATIBLE_MACHINE)
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Use mainline bsp support as default.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Those machines are unbuildable as we removed the barebox (which was
not building for ages) so it seems nobody care about those boards.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
We are passing ${baudrate} for the bootparam so the bootargs are
handled properly.
Change-Id: I8084ff18a8d8ec63709554540687a79511b1162a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The 4.17 kernel includes the split of imx7d-pico (the SoM) and
imx7d-pico-pi (the SoM + baseboard) split, thus we need to update it
here as well.
Change-Id: Ie9e6aed357af055d906073284d1faba02f84d8e5
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
The 'secure_defconfig' was removed, see [1].
[1] 8273209bd9
Signed-off-by: Pierre-Jean Texier <texier.pj2@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
IMAGE_FSTYPES = "wic.gz" and WKS_FILE = "imx-uboot-bootpart.wks" are
already set in imx-base.inc
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
IMAGE_FSTYPES = "wic.gz" is already set in imx-base.inc
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
