mirror of
https://github.com/Freescale/meta-freescale-3rdparty.git
synced 2025-07-19 20:19:01 +02:00
![]() The ConnectCore 6UL Single Board Computer (SBC) Pro contains the ConnectCore 6UL System-On-Module. Its hardware specifications are: * 256MB DDR3 memory * On module 256MB NAND flash * Dual 10/100 Ethernet * USB Host and USB OTG * Parallel RGB display header * LVDS display header * CSI camera * GPIO header * I2C, SPI, CAN headers * PCIe mini card and micro SIM slot * MicroSD external storage * On board 4GB eMMC flash * Audio headphone, line in/out, microphone lines The build artifacts are: U-Boot images: u-boot.imx Linux partition image: <image name>.boot.ubifs Root filesystem image: <image name>.ubifs Root filesystem tarball (for network booting): <image name>.tar.bz2 To program a board from the U-boot prompt, copy the U-Boot, Linux and root filesystem partition images to your TFTP server root and do: env set ipaddr <target ip address> env set serverip <TFTP server ip address> update uboot tftp u-boot.imx update linux tftp <image name>.boot.ubifs update rootfs tftp <image name>.ubifs More details about the SBC can be found at: https://www.digi.com/products/embedded-systems/single-board-computers/connectcore-for-i-mx6ul-sbc-pro Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com> |
||
---|---|---|
.. | ||
include | ||
apalis-imx6.conf | ||
ccimx6ulsbcexpress.conf | ||
ccimx6ulsbcpro.conf | ||
cgtqmx6.conf | ||
cm-fx6.conf | ||
colibri-imx6.conf | ||
colibri-imx6ull.conf | ||
colibri-imx7.conf | ||
colibri-vf.conf | ||
cubox-i.conf | ||
imx6dl-riotboard.conf | ||
imx6q-dms-ba16.conf | ||
imx6qdl-variscite-som.conf | ||
imx6qsabrelite.conf | ||
imx6sl-warp.conf | ||
imx6ul-pico.conf | ||
imx7d-pico.conf | ||
imx7s-warp.conf | ||
imx233-olinuxino-maxi.conf | ||
imx233-olinuxino-micro.conf | ||
imx233-olinuxino-mini.conf | ||
imx233-olinuxino-nano.conf | ||
m28evk.conf | ||
m53evk.conf | ||
nitrogen6sx.conf | ||
nitrogen6x-lite.conf | ||
nitrogen6x.conf | ||
nitrogen7.conf | ||
nitrogen8m.conf | ||
pcm052.conf | ||
tx6q-10x0.conf | ||
tx6q-11x0.conf | ||
tx6s-8034.conf | ||
tx6s-8035.conf | ||
tx6u-80x0.conf | ||
tx6u-81x0.conf | ||
tx6u-8033.conf | ||
ventana.conf | ||
wandboard.conf |