mirror of
https://github.com/Freescale/meta-freescale-3rdparty.git
synced 2025-07-19 12:09:01 +02:00
85b9830c91
Update the kernel for a fslc-imx 4.1-2.0.x based kernel for Apalis/Colibri iMX6 and Colibri iMX7. This replaces the linux-toradex_3.14.52 and linux-toradex_4.1.15 kernels, thus remove the recipes and their related files. Add a superset of the machine specific defconfigs in the kernel tree as the defconfig. The following changes on top of fslc "Merge tag 'v4.1.39' into 4.1-2.0.x-imx": - Patches for bsp 2.7.3 as listed below - Merge to upstream patchlevel fslc/4.1-2.0.x-imx @ 4.1.44 - Patches for bsp 2.7.4 as listed below - Added initial support Colibri iMX6ULL and Colibri iMX7 Dual 1GB (eMMC) without the machine specific device-trees or defconfigs commits.: with bsp 2.7.4 * b893ccb toradex defconfigs: synchronize with defconfigs in oe * 3e11eb1 colibri_imx7_defconfig: add atmel-mxt-ts as a module * f5f2907 ARM: dts: imx7-colibri: add atmel mxt multitouch controller * e747c0e ARM: dts: colibri-imx7: add new gpio hog grp * 269dba3 colibri_imx6_defconfig: add atmel-mxt-ts as a module * b9aae76 ARM: dts: imx6dl-colibri: add atmel mxt multitouch controller * de3fd44 apalis_imx6_defconfig: add atmel-mxt-ts as a module * 98b9c18 ARM: dts: imx6qdl-apalis: add atmel mxt multitouch controller * bce5146 ARM: imx: clk: enable OCOTP clock by default * d96c255 imx6ull.dtsi: include all needed definitions * c8f0033 mtd: gpmi: fsl,legacy-bch-geometry independent of nand-on-flash-bbt * 7b02a99 imx: Fix 'Expose SoC unique ID' for newer i.MX6 * 4e35498 imx6dl-colibri-eval-v3: fix weim node * 090138a regulator: pfuze100: Apalis iMX6: Fix poweroff does not release POWER_ENABLE_MOCI * c4d5e86 apalis_imx6: update defconfig for wifi * 837a89e ip6_offload: fix compiler warning * 4105f39 of: fdt: fix compiler warning * 4b20a89 mtd: blkdevs: fix switch-bool compilation warning * c595a9e mtd: fsl-quadspi: fix macro collision problems with READ/WRITE" * 6fe6616 Revert "mtd: fsl-quadspi: fix macro collision problems with READ/WRITE" with bsp 2.7.3 * 3f68dc7 busfreq-imx: only use existing global variables * 22eb8a9 Revert "cpufreq: imx7: fix undefined reference to arm_reg and soc_reg" * 38524d7 Documentation: fix imx7d pinctrl dse config bits * 71d7b33 imx7d-colibri: limit to 800 mhz and 1 ghz operating points * b339205 imx7s: add mandatory 800 mhz operating point * 22db6be video: fbdev: mxsfb: allow setting display timings via kernel command line * a6563bd cpufreq: imx7: fix undefined reference to arm_reg and soc_reg * 9262956 dts: imx7d: move operating points to i.MX 7Dual device tree * 50e26af mxc_ipuv3_fb: Use the mode_string from command line as is * d826eb4 ov5640_mipi: Revert the hack * a5c56b9 ARM: dts: imx6qdl-apalis-ixora: Enable ADV7280 decoder on Ixora * b8e5d21a tty: serial: imx: Add support for enabling RS485 via device tree * a8e0d43 ARM: imx: spare the first 16KiB of OCRAM_S for Cortex-M4 * a2130af sgtl5000: improve switch on vag power for line_in -> output * b48a96a ARM: dts: colibri imx6: configure an external sgtl5000 vddd source * d21fcda ARM: dts: apalis imx6: configure an external sgtl5000 vddd source * 40fbb01 ARM: dts: colibri imx6: increase sgtl5000 lrclk drive strenght * 87f6630 ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed * 1a3c9b3 ASoC: sgtl5000: add headphone and LINEOUT mute controls * 8929d0a sgtl5000: add Lineout volume control * 81fba3f ASoC: sgtl5000: Do not disable regulators in SND_SOC_BIAS_OFF * 66a04e9 ASoC: sgtl5000: Disable internal PLL early * 85436af ASoC: sgtl5000: Initialize CHIP_ANA_POWER to power-on defaults * 51bc42e ASoC: sgtl5000: Write all default registers * 4523526 ASoC: sgtl5000: Fix regulator support * 4859c2e90 ASoC: sgtl5000: Remove misleading comment * abbdc0a ASoC: sgtl5000: fix VAG power up timing * 198628d ASoC: sgtl5000: fix error message output for MicBias voltage * 912e038 ASoC: sgtl5000: Replace direct snd_soc_codec dapm field access * ae56e9d ASoC: sgtl5000: Calculate Lineout Channel Output Level * 3db63e2 ASoC: sgtl5000: Use specific variable for lo_vag * f972815 net: can: flexcan: Fix wakeup on CAN from suspend issue * b6798bb iio: adc: remove event advertisment * 7a751b2 iio: adc: support IIO_CHAN_INFO_SCALE * 051ee1a1 apalis-imx6: use stopmode for poweroff * 8949147 pm-imx6.c: fix power off by stop mode * 29ff238 colibri-imx6: use stopmode for poweroff * 94a53ed net: fec: don't transfer ownership until descriptor write is complete * c15a4c3 rtc: ds1307: support m41t0 variant * 3e3ea9b sgtl5000: switch on vag power for line_in -> output * 091594e iio: adc: fix remove * 4bac3c9 mmc: sdio: add forward declaration for struct mmc_host * a86db1f ARM: imx: mu: let Cortex-M4 know about A7 state * 98adbba ARM: imx: clk: do not force clock frequency of M4 * 9e05354 ARM: imx: busfreq: do not force high frequency during suspend * 70f901b ARM: imx: busfreq: initialize M4 frequency depending boot state * 3e92301 ARM: imx: busfreq: request bus frequency depending on M4 clock * 0666dae arm: dts: imx7: specify Cortex-M4 clock * c663470 mmc: sdhci-esdhc-imx: make sure runtime PM is suspended in system suspend * 2df675a mtd: gpmi: make sure runtime PM is suspended in system suspend * ebf4565 video: fbdev: mxsfb: make sure runtime PM is suspended in system suspend * a2ccbd2 net: fec: make sure runtime PM is suspended in system suspend * 5ced941 imx_thermal.c: set trip point depending on temp grade * 9090b5b imx: Expose SoC unique ID * 8a098f2 drivers: soc: Add new sysfs attribute to expose SoC unique ID * 36df4e2 arm: dts: imx7: specify keypad port clock * 7b51b63 ARM: imx7d: clk: add root clock for keypad port * 506993e rpmsg: use _debug variants for print_hex_dump * 5aba75e rpmsg: imx: do not push data when no reader is available * cade8f64 hexdump: do not print debug dumps for !CONFIG_DEBUG * 1db9a16 ARM: imx: define buffer count per VirtIO queue * 4cfa939 gpio: mxc: clear interrupt mask/status optionally * 25b9f89 ARM: imx: remove 'unused' warning * 257fabb tty: serial: imx: disable DCD and RI interrupts * c784a4d imx6qdl.dtsi: include bindings gpio.h * 735d4f8 video: mxc: ldb: Add support for LVDS configuration via kernel boot arguments * 558d378 colibri_imx6:Add MCP2515 SPI CAN controller to DT * 7df8a0f media: Add support for ADV7280 decoder driver * 358a46a mxc_v4l2_capture: Change error message to print on debug * 80aae0b mxc_v4l2_capture: Allow clock setting for de-interlaced video input * 0d85191 tty: serial: imx: disable DCD and RI interrupts * 8ddc702 PCI: Apalis GEN1 forcing quirk * 826486c PCI: imx6: fix PCIe EP device self-initialisation * e00c546 process.c: if power off fails, do at least a halt * be63e27 Input: sentelic - use "static inline" instead of "inline" * b28f212 mxc_v4l2_capture.c: make error messages unique * d7357aa ipu_csi_enc.c: fix debug print * 4e1e8d2 max9526.c: move pinctrl after i2c detect * 638f43c adv7180.c: convert debug output to dev_dbg * 67c0d5a2 dtb, i2c-imx.txt: fix typos * 1ce23b6 mxc_v4l2_capture: match ipu/csi/mipi instead of only ipu/csi * c5954c2 max9526: add initial MXC camera sensor code * df76b16 adv7180.c: initial working adv7180 settings * 518d4ee mxc_v4l2_capture: let the camera driver set mipi/parallel * 62785df pci-imx6: fix reboot bug * d2e0de0 mxc_hdmi.c: fix boot hang * cec9878 extcon: usb-gpio: increase debounce time * 1fe0cf4 mxc_lcdif.c: fix comment * 912f823 mxc_v4l2_capture: add mxc_camera_common_lock/unlock, fix device name * 502376a MXC_CSI_CAMERA: select VIDEOBUF2_DMA_CONTIG * 691204a clk-imx6q.c: set eth phy clock dependent on RMII/RGMII * bea0575 mach-imx6q.c: handle RESET_MOCI when PCIe is disabled * 78d5ad8 mxc_hdmi.c: remove compiler warning * 2d67c55 mxc_hdmi: fix detect disconnect case * b34325c OmniVision ov5640 MIPI-CSI2 camera support * b548028 i2c-imx: add gpio recovery functionality * fc0d0a2 pcie-imx6: improve reset function for reseting EP * 557f0276 pcie-imx6: add reset function for reseting downstream EP * b0e8865 mach-imx6q.c: fix typo in error msg * 0bcaad8 mxc_vdacif.c: add second parallel output used for VDAC * f069491 pci-imx6.c: add config option to force GEN1 speed * e4d913a iio:stmpe-adc.c: Switch to new event config interface * af6cf45 vgaarb.c: demote pr_err about vga device to pr_debug * 4e6509c mxc_lcdif.c: add additonal LCD timings * 849f2e7 pci-imx6.c: remove compiler warning * 85aff64 mxc_lcdif.c: EDT-WVGA: fix pixelclk polarity * f6620779 mxc_hdmi: skip unnecessary mxc_hdmi_setup calls * c73cb81 sync.h: synchronization framework needs this header * d39b4cf arm: imx6: fix pcie by disabling rc/ep test mode * 7435612 stmpe-adc: add temperature channel * 6f88e1d stmpe-adc: add device tree bindings * 6b542ac iio: adc: add STMPE ADC driver using IIO framework * d5c4b1b mfd: stmpe: add ADC block resources * 3b99e8c mach-types: add the apalis-imx6 machine * 6a315fa lcd: Add WVGA timings for the EDT 7.0" panel * 6ff9133 mxc_spdif.c: set the validity bit to 'valid' * 25c2bbc eMMC: Don't initialize partitions on RPMB flagged areas. * d2aa5b3 tc358743_h2c: add devicetree support * 97662d8 TC358743 Kconfig dependency update * e966a0b tc358743_h2c: fill in sample edid data from Asus monitor * fa98ab8 tc358743_h2c: fix compiler warnings * 1ae41be tc358743_h2c: cleanup spacing * cb8232e add tc358743_h2c driver * 3bb87f2 sdhci: print opcode/retries on timeout error * a26957b ov5640_mipi: software reset does not affect i2c address * f157011 ipu_common: ipu_free_irq, do nothing if not owner * 916ed1f ipu_csi_enc: improve error message * 439ea46 ipu_prp_enc: improve error message * cd35b25 ov5642: fix csi/ipu check for imx6dl * 388605f ov5640_mipi: fix csi/ipu check for imx6dl * 07bd62d ov5642: add i2c address change feature * 73924ed0 ov5640_mipi: add i2c address change feature * 12749a2 mxc_mipi_csi2: add ipu/csi info to probed output * 9ffb829 ov5640_mipi: change registered name from ov5640 to ov5640_mipi to reduce confusion * 98963d0 i.MX6: v4lout: none of our displays support color-space conversion * f657dc3 dma-mapping: increase DEFAULT_DMA_COHERENT_POOL_SIZE ifdef CONFIG_VIDEO_TW68 * 41feae5 PCI: Add quirk for setting valid class for TW6869 frame grabber * d69533a mxc_hdmi: Add only_cea parameter to mxc_hdmi module * 5969e2c rfkill-regulator: add dt support * 66d9883 ov5640_mipi: simplify mipi clock wait loop * 04abce7 mxc_hdmi: enable overflow interrupt after initialization complete * de5231f mxc_hdmi: default to keep-alive (don't detect disconnect) * 51394b5 Add support for DVI monitors * 4898869 ov5640_mipi: print message on gpio request failure * e2954c5 mxc_v4l2_capture: add ipu_id to sensor_data * af79b8b ov5640_mipi: add remove *2 and add error checking to OV5640_get_sysclk * a03ab41 ov5640_mipi: add imx6 mipi/parallel selection * 4f704da ov5640: add pwm option for mclk * 81cf941 ov5642: add imx6 mipi/parallel selection * ede1722 fix camera power down * 6c4f140 add ar1021 touchscreen * bc387b6 mxc_v4l2_capture: fix VIDIOC_ENUMSTD, return -EINVAL if index > 0 * 89a914b mxc_ipuv3_fb: unblank displays at init * a1b1b16 ARM: imx: adjust vring location to be at 256MB boundary * 8227a8a arm: dts: imx7: decrease DMA CMA to 128MB * 4af562c ARM: imx7d: clk: add 240MHz sys main clock to init_on * 1f43d37 usb: chipidea: Use extcon framework for ID and VBUS detection * 24bd9a5 arm: dts: imx7: Add support for PWM polarity control * e32dd66 pwm: imx: Add support for polarity control * 10a6f7d cpufreq: imx7: don't support OPP table from platform data * 46c52bd video: fbdev: mxsfb: honor native-mode * b03cdd9 video: mxsfb: simplify parsing * f3d8abf Revert "sgtl5000.c: HACK, defer probe when I2C not yet running" * 967986f touchscreen: fusion_F0710A: Reset controller if clear interrupt operation fails * d4afe65 input: touchscreen: fusion: implement multitouch with slot handling * 5be4f48 input: touchscreen: fusion: use level triggered interrupt * fbfa23b input: touchscreen: fusion: add device tree integration * 02411ee input: touchscreen: fusion: platform independent GPIO description * fd92393 input: touchscreen: fusion: fix error handling * 808f8b9 input: touchscreen: fusion: use new I2C PM functions * ef32550 input: touchscreen: added platform data for Fusion touchscreen * 3e2c068 input: touchscreen: fix race condition in Fusion driver * ac9343d input: touchscreen: add ABS_X/ABS_Y axis for Fusion touchscreen * a9fc7d5 input: touchscreen: add Fusion 7 and 10 multi-touch driver * e2d1fdb fbcon: logo: allow easy integration of a custom Linux boot logo * 49f0b58 spi: spidev: invent a new hw device to work around spidev warning * bcdfec9 ARM: imx: fix clock for i.MX 7 when Cortex-M4 is running * 8693a14 pinctrl: pinctrl-imx: add support for LPSR GPR padctrl * ea2ea01 mfd: rn5t618: register restart handler * a7b0e5f mfd: add Ricoh RN5T567 PMIC suppport * 675e67c drivers/dma/Kconfig: allow MXS_DMA for i.MX 7 * d68621a regulator: rn5t618: allow GPIO 0 to be used for an enable signal * f0e41d7 ENGR00305648-1 ASoC: imx-sgtl5000: Support non-ssi cpu-dai * f992a95 video: fbdev: mxsfb: fix pixelclock polarity * d46df08 mach-imx7d.c: use enet_out clk to decide on PHY clock * 68bf174 Input: ad7879 - add device tree support * 63339e0 Input: ad7879 - fix default x/y axis assignment * d1a439e Input: ad7879 - move header to platform_data directory * 0adde3f ARM: imx: enet1: output reference clock * 633a4e1 video: mxsfb: add compile dependencies * f4c63ec chipidea: make usb charger optional * c8b53a4 regulator: rn5t618: Add RN5T567 PMIC support Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> |
||
|---|---|---|
| conf | ||
| recipes-bsp | ||
| recipes-core | ||
| recipes-kernel | ||
| .gitignore | ||
| README | ||
OpenEmbedded/Yocto BSP layer for Freescale's ARM based platforms
This layer provides support for Freescale's ARM based platforms for use with OpenEmbedded and/or Yocto Freescale's BSP layer.
This layer depends on:
URI: git://git.openembedded.org/openembedded-core branch: master revision: HEAD
URI: git://git.yoctoproject.org/meta-freescale branch: master revision: HEAD
Contributing
To contribute to this layer you should the patches for review to the mailing list.
Mailing list:
https://lists.yoctoproject.org/listinfo/meta-freescale
Source code:
https://github.com/Freescale/meta-freescale-3rdparty
When creating a patch of the last commit, use
git format-patch -s --subject-prefix='3rdparty][PATCH' -1
To send it to the community, use
git send-email --to meta-freescale@yoctoproject.org <generated patch>
Patches are normally intended for the master branch.
Patches for other branches should be sent separately so they can be tracked individually in Patchwork and should have the branch name in brackets.
For example, use this to generate a patch for branch 'morty':
git format-patch -s \
--subject-prefix='3rdparty][morty][PATCH' -1