mirror of
https://github.com/Freescale/meta-freescale-3rdparty.git
synced 2025-07-19 12:09:01 +02:00
ca3b9fb496
This bumps the U-Boot and its corresponding script recipes, for Boundary Devices, to current stable release. It has a number of commits which are quoted below: d4aa4cce1f7 nitrogen51_vm: change I2C2 pullup to 47K f0731093dd0 nitrogen51_vm: add OKAYA_480_272 support 9cbdb79a32f ys: initial addition, Boundary Devices board b8a7b0c0a0b phy: enable auto-negotiate with software reset 3cad300c792 bt.h: use BD_CMA to specify cma= on cmd_line be6a9d8d37c crm_regs: add define for CCM_CCGR7 e76a593aade nitrogen6sx: set usb_ether mac properly 9ccd9a96ad8 lshore: add missing wlmac address setup 21ec9c565f6 6x_bootscript-mainline: add support for BD070LIC2 876e1a7e0e4 nitrogen6sx: fix missing clock enable for FEC1 3aa9b6eee34 fbpanel: use FB_COUNT instead of hardcoded 4, it is 5 now 84b5524eecc nitrogen6_max: add retries for i2c write failures d3932a38898 fbpanel: fix cmd_lvds2 when lvds2 is primary cde232f5640 nitrogen6_som2: add nitrogen6_som2_s1g_defconfig 8f2eb9cd133 nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 for LVDS2 as well 3d8689f9671 acl: initial addition, Boundary Devices board e34370a6b4e nitrogen6_max: add gt911 touch controller if serializer detected f260b0435d0 nitrogen6sx: add select MX6SX to Kconfig so that ROM_UNIFIED_SECTIONS is properly selected 564a13998e8 nitrogen6_max: add VD_TFC_A9700LTWV35TC_C1 5c9688ac256 fbpanel.h: add VD_TFC_A9700LTWV35TC_C1 b2c0c5170a5 mx5: soc: use iim_srev to detect TO3 e0dc8ac3dba mx5: lowlevel_init: use iim srev instead of undocumented register 40c6ef96ad7 mx5: lowlevel_init: add macro orr_mx51_tape2_or_lower 870a24137ec mx5: lowlevel_init: merge mx51/mx53 code 6000a279a20 mx5: lowlevel_init: use parameters for init_aips/init_m4if ff17737017b mx5: lowlevel_init: invalidate L1 cache 9565e071927 mx5: lowlevel_init: add erratum 709718, aips change to allow devregs to work 2ebd038eb42 mx5: lowlevel_init: pll startup change 2f62ea7ce99 mx5: imx-regs fix DP_OP_216 3d5cc7df8bf mx5: lowlevel_init: prevent glitches ff971e4fff8 mx5: lowlevel_init: use \r_plln 2317e212690 mx5: lowlevel_init: use macro divisor_change_wait 26de5cc68f7 mx5: lowlevel_init: use \r_ccm where CCM addresses are referenced 05fc9dc6076 mx5: lowlevel_init: use \r_zero for r4 6d5affbfbda mx5: lowlevel_init: minor cleanup of init_l2cc 9677253036b mx5: lowlevel_init: Turn on internal oscillator 8e727836532 mx5: lowlevel_init: disable IPU handshake for i.mx53 88e0baed772 6x_bootscript-yocto-3.14.txt: add run cmd_lcd2 2797b9eb8e2 6x_bootscript-ubuntu-3.14.txt: add run cmd_lcd2 1ccd3f6741f 6x_bootscript-yocto-3.14.txt: add reset_cause 7e503ee4dde 6x_bootscript-ubuntu-3.14.txt: add reset_cause 04365fec48c 6x_bootscript-mainline.txt: add reset_cause 47438c927dd 6x_bootscript-mainline.txt: add loglevel 944a95b558e 6x_bootscript-yocto-3.14.txt: add loglevel 858415ec8ba 6x_bootscript-ubuntu-3.14.txt: add loglevel 04e51858efe net_upgrade*.txt: add i.mx51/i.mx53 support 60b263044f3 6x_bootscript*.txt: add i.mx51/i.mx53 support 67e57440058 6x_upgrade.txt: add mx51 support 24fc7fb0cff nitrogen51_vm: initial addition ac115c6cd24 boundary: add cma= option 2094c6c194c boundary: add loglevel= environment variable ec049bb3226 iomux-mx51.h: add MX51_PAD's for nitrogen51_vm daf3771beeb boundary: allow override of CONFIG_SF_DEFAULT_CS, make fastboot conditional on CONFIG_CI_UDC 2303f1649ef mmc: add more prints if CONFIG_MMC_TRACE 38d0cb55532 fsl_esdhc: add print on timeout 0b08d4f71a2 fbpanel: add FB_LCD2 for imx51 support 13a104a55fe configs: boundary: add imx51 specifics 6fb31fe2b42 mx5: clock: add get_pll3_clock 850c0423219 mx5: soc: add CONFIG_IIM_MAC_ADDR_INDEX option 06ab77a56e8 mxc_i2c: add I2C_PADS_INFO_CPU for imx51 79dde89cf15 iomux-v3: add IOMUX_PAD_CTRL for imx51 0abcfcb1f3f ipu_disp: add set_bit_ so that mx51evk links d9cf0d43abb fbpanel.h: add VD_800X300_565 ed6fb265137 fbpanel: make sure to disable lcd node 179f519e4c0 Revert "mtp: change drive strength for spi nor to cleanup signals" e598f147059 ta: add TM070JDHG30 tianma panel 802adfafc2c 6x_bootscript-mainline: switch to new panel naming 4ec3c01faf6 hp: add hp_s512m_defconfig 1cef05812f1 hp: initialize otg network always 63869b4930c fbpanel: create function reparent_lvds by moving code 0de6bf20ea6 fbpanel: only change ldb that is needed and follow EB821 closer 41f9d742264 mtp: change drive strength for spi nor to cleanup signals eff504504a4 6x_bootscript-mainline: update for new display configuration 085adc691b1 nitrogen6_som2: add 4GB 6QP version 7e2d42d4541 nitrogen6_som2: declare TC358743 interrupt as input 5b7f23993c6 nitrogen6_max: declare TC358743 interrupt as input 11a40dbf9eb nitrogen6x: declare TC358743 interrupt as input 50792ca7c47 mtp: s/PAD_CTL_DSE_90ohm/PAD_CTL_DSE_80ohm/ to fix compile error 48397d6bbab nitrogen6_som2: add nitrogen6_som2_s512m_defconfig 18410a11097 nitrogen6q_som2: rename some cfg files 069f21abe72 mtp: change i2c drive strength to avoid undershoot d97a3590524 cnt: fix boot devs configuration 1ac271099a4 ta: no functional change, separate sd3/sd4 pad settings 6d308c573aa nitrogen6_vm: change sdcard drive strength(partial revert) d886449bce2 vp: add CONFIG_SPI_FLASH_SPANSION 34986328ab3 utc: add CONFIG_SPI_FLASH_SPANSION 70a22fba3d8 usd: add CONFIG_SPI_FLASH_SPANSION 570ed2ee184 ta: add CONFIG_SPI_FLASH_SPANSION 48bb77bc9be sp: add CONFIG_SPI_FLASH_SPANSION 09f42137f89 snap: add CONFIG_SPI_FLASH_SPANSION f013cc37b29 s: add CONFIG_SPI_FLASH_SPANSION 657c579277f rc: add CONFIG_SPI_FLASH_SPANSION 1ed9f0d0e2b per: add CONFIG_SPI_FLASH_SPANSION e68dac99b25 oc: add CONFIG_SPI_FLASH_SPANSION 91da7c260a9 nw: add CONFIG_SPI_FLASH_SPANSION 9d78eb3758c nitrogen7: add CONFIG_SPI_FLASH_SPANSION a44ca9e853d nitrogen6sx: add CONFIG_SPI_FLASH_SPANSION e0b0907a4b6 nitrogen6_som2: add CONFIG_SPI_FLASH_SPANSION 006d092bea9 nit6xlite: add CONFIG_SPI_FLASH_SPANSION 1144306e04b mx6_r: add CONFIG_SPI_FLASH_SPANSION 5d50cae139d mtp: add CONFIG_SPI_FLASH_SPANSION cc105f12d54 med: add CONFIG_SPI_FLASH_SPANSION 0fbd8b073be mcs: add CONFIG_SPI_FLASH_SPANSION cd0f943f65a lshore: add CONFIG_SPI_FLASH_SPANSION 9e92731434c ls: add CONFIG_SPI_FLASH_SPANSION 79d3866dbac jlm: add CONFIG_SPI_FLASH_SPANSION a3cf8d09596 ioc: add CONFIG_SPI_FLASH_SPANSION 5890b8f08a2 insp: add CONFIG_SPI_FLASH_SPANSION 9554ba32f09 h: add CONFIG_SPI_FLASH_SPANSION 64147c73a26 hp: add CONFIG_SPI_FLASH_SPANSION 31e290acc4e h4: add CONFIG_SPI_FLASH_SPANSION 4da54b4548e eo: add CONFIG_SPI_FLASH_SPANSION a4c45db4db0 dash: add CONFIG_SPI_FLASH_SPANSION 25d2dd5f357 cob: add CONFIG_SPI_FLASH_SPANSION 0e561da8823 cnt: add CONFIG_SPI_FLASH_SPANSION 0067da2223b cad: add CONFIG_SPI_FLASH_SPANSION 7f9fcfe5df3 bt2: add CONFIG_SPI_FLASH_SPANSION c1ff99ce870 bt: add CONFIG_SPI_FLASH_SPANSION 00e87792942 ash: add CONFIG_SPI_FLASH_SPANSION 548be920b23 a: add CONFIG_SPI_FLASH_SPANSION 216208c9e08 nitrogen6_vm: add CONFIG_SPI_FLASH_SPANSION b208c9db170 nitrogen6_max: add CONFIG_SPI_FLASH_SPANSION 060c11e17a7 nitrogen6x: add CONFIG_SPI_FLASH_SPANSION 52d3ab1d2cb sf_params: S25FL116K can handle 4k erase sectors 124d520fa98 nitrogen6_vm: change sdcard drive strength b8ce3466180 nitrogen6sx: make more like Linux dts file c58fae8eb1c nitrogen6_max: add nitrogen6_max_dl4g_defconfig 48372d8d805 nitrogen6_max: add nitrogen6_max_dl2g_defconfig 3748d2a3550 nitrogen6_max: update comments in 1066mhz_4x512mx16.cfg bf5e304c9b7 nitrogen6_som2: fix PHY address mask b0e4961647c fbpanel: deglitch lvds clock dc5a05b2f4d ipu_disp: add timeout to wait for flip routine d4c925893b8 nitrogen7: add secure boot option 59f462be1e3 nitrogen6sx: add secure boot option 0ab5c83f84d nitrogen6_scm: add secure boot option 5396b784385 nitrogen6x: add secure boot option f06fbcda874 nitrogen6_vm: add secure boot option 157b6ab6696 nitrogen6_som2: add secure boot option 2305368a722 nitrogen6_max: add secure boot option 352f51f80db nit6xlite: add secure boot option 3082b043b0c boundary.h: add secure boot options 076a9cb9883 arm: imx-common: introduce back usec2ticks e9ed68406db arm: imx-common: add SECURE_BOOT option to Kconfig 4196510b0da fbpanel: add Sexp parsing (SPI/pre_enable/bus,addr/backlight period) f210971b999 nitrogen6x: s/board_enable_spi_rgb/board_pre_enable/ 7bf1681cf60 fbpanel: use board_pre_enable e8fabd81988 fbpanel.h: 10kHz backlight for ASIT500MA6F5D 1fa3bba2d4b nitrogen6x: add VD_KD024FM 692c9d3a43c fbpanel: add VDF_KD024FM cacfe5aa6a7 fdt: use be32_to_cpup when getting device tree value into variable 43d3fb4cebf ash: add EIM_EB2 for sd card power control f54c69912fd net_upgradeu_fs: initial addition 0a0309be807 net_upgradeu: remove offset and friends from environment a2f88f6166d net_upgrade_fs: restructure to avoid using exit b66aec73f88 mcs: add 6x_bootscript-ubuntu-3.14.txt c417f091036 mtp: add 2g config option 473f6da58ba net_upgrade_fs.txt: grab decompressed size from end of file 12f3113011d 6x_bootscript-*-3.14.txt: add support for m4 specific dtb 75299b88329 nitrogen7: add initial m4 support for FreeRTOS 976118b2bb1 nitrogen6_scm: update m4 support for FreeRTOS 582f3b6dc12 nitrogen6sx: update m4 support for FreeRTOS ce42e3cbd98 Revert "ENGR00315894-57 iMX6SX: Add M4 boot support at soc level" 4f42f0b64e3 Revert "ENGR00315894-56 CMD: Add new command "bootaux" to boot auxiliary core" a796b997470 Revert "ENGR00322860 iMX6SX: Add function to check M4 status before booting" ed95621fd51 vp: setup rgb_gpio_pads in board_early_init_f 5fd3676496f utc: setup rgb_gpio_pads in board_early_init_f 5d959ff5898 nitrogen6x: setup rgb_gpio_pads in board_early_init_f 32871fd5555 nitrogen6sx: setup rgb_gpio_pads in board_early_init_f 90d8ca8c9c5 nitrogen6_vm: setup rgb_gpio_pads in board_early_init_f 555e1493594 nitrogen6_som2: setup rgb_gpio_pads in board_early_init_f 2abecc8ca8f nitrogen6_scm: setup rgb_gpio_pads in board_early_init_f d9d0feab24d nitrogen6_max: setup rgb_gpio_pads in board_early_init_f fe5ed50b64f mx6_r: setup rgb_gpio_pads in board_early_init_f 7e0785ec737 lshore: rgb_gpio_pads should not depend on CONFIG_CMD_FBPANEL 2de579e05a9 jlm: setup rgb_gpio_pads in board_early_init_f 96edaf1318e ioc: setup rgb_gpio_pads in board_early_init_f 77f3f1eef2c insp: setup rgb_gpio_pads in board_early_init_f 86ffaa44f9e h4: setup rgb_gpio_pads in board_early_init_f 1943edfc70b h: setup rgb_gpio_pads in board_early_init_f 866b5dfa55f cob: setup rgb_gpio_pads in board_early_init_f 147907e52ba cad: setup rgb_gpio_pads in board_early_init_f 03be7ad1b02 bt2: setup rgb_gpio_pads in board_early_init_f 3fdfa566ba1 ash: GP_BSL_CB_ON_OFF default to low again b155a32963f nitrogen6sx: print ethernet phy name bc38c58f481 fbpanel: only reference lvds-channel@1 if (fb == FB_LVDS2) e11ec148795 nitrogen7: swap GPIO1_IO02/GPIO1_IO03, only CLK02 can be slow clock 7d74f3ca6da hp: add tx enable for rs485 0ecd2f9444e nit6xlite: increase sd card drive strength 1e72771a0f0 nit6xlite: setup remaining pins 134843018d1 hp: add VD_AFK1024600A02 3ad3cd470a9 fbpanel: add VD_AFK1024600A02 77eb38a8720 hp: initial addition, Boundary Devices board 4e8b94259ae nitrogen6_max: add nitrogen6_max_4gr0_defconfig for 4G rank0 a7a41242894 bt2: increase refresh rate for 4G-rank0 e9940907cff ash: add CONFIG_VIDEO_SKIP_VERSION 0cf83cbf932 cfb_console: add CONFIG_VIDEO_SKIP_VERSION 63b97f6aa66 ash: GP_BSL_CB_ON_OFF high, TX23D200_18 default dispay 39deb0a8b01 net_upgradeu.txt: MX25L6405D has 64k erase size a11053ce6b5 nitrogen7: add qspi-MX25L6405D d8777349baa 6x_upgrade.txt: MX25L6405D has 64k erase size 50613679561 nitrogen7_defconfig: add CONFIG_SPI_FLASH_MACRONIX b18d021ecea nitrogen7: allow 4 bit mode for winbond qspi chip fc803e8dbe4 nit6xlite: add splash screen support d541e011e5c 6x_bootscript-*-3.14.txt: set bootargs after importing environment variable, as it may reset bootargs 63a40ca20a7 boundary.h: increase fastboot buffer size 3da2362e059 nitrogen7: fix wlmac f668585d5cb 6x_bootscript-*-3.14.txt: s/enable_msi/disable_msi/ b0d9caca6e1 nitrogen7: add wlmac environment variable 9ee71d2be72 nitrogen7: add cmd_custom=echo to avoid upgrade message 6bfa839dbad net_upgradeu.txt: s/dhcp/tftp/ since ipaddr is already valid c00c2c0d345 net_upgrade_fs.txt: s/dhcp/tftp/ since ipaddr is already valid 9bd6e794beb 6x_bootscript-yocto-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi 996fcb7f2c9 6x_bootscript-ubuntu-3.14.txt: add Laci's changes(cpu/board/bootpart) and nomsi 6b22f6e0d62 boundary: separate bootcmd so it can be overridden c88b07b5f93 nitrogen7: qspi-SST25VF016B: comment change 64952e4c384 nitrogen6_scm: initial addition, Boundary Devices board 8d4ad5af80e i2c: add CONFIG_SYS_I2C_MASK 07714294a0f a: call preboot_keys c4806b093db vp: use boundary.h 1e71a937f3c utc: use boundary.h 988c7eff8d6 usd: use boundary.h 55e21bda72f ta: use boundary.h e2327106ea9 sp: use boundary.h dcacaf7b6db snap: use boundary.h 5cb0b8d1a74 s: use boundary.h 4aa596403f8 rc: use boundary.h 6b5b3ad0e4b per: use boundary.h aa4848f2204 oc: use boundary.h 94dbb81eef5 nw: use boundary.h b6b6b0ce64c nitrogen7: use boundary.h 1785110ed16 nitrogen6x: use boundary.h cd9ff89b999 nitrogen6sx: use boundary.h 60732290a9e nitrogen6_vm: use boundary.h 57b208e6268 nitrogen6_som2: use boundary.h 6ea8e1182b7 nitrogen6_max: use boundary.h afb7083ace9 nit6xlite: use boundary.h b5c060a77f6 mx6_r: use boundary.h b50fa4727dc mtp: use boundary.h a94d7331856 med: use boundary.h 694833e08d9 mcs: use boundary.h d03b7c4def3 lshore: use boundary.h c82d3faded5 ls: use boundary.h 7e3984ed2cf jlm: use boundary.h 7a08933ddd6 ioc: use boundary.h 1b29f03020d insp: use boundary.h ed029b9d6ac h4: use boundary.h 78e32d217d3 h: use boundary.h 7f1bd666e39 eo: use boundary.h cc3bfe17611 dash: use boundary.h ed706954593 cob: use boundary.h 55cf2dfd68e cnt: use boundary.h 2d4a9e17835 cad: use boundary.h c06aed4b2c9 bt: use boundary.h 39bed41e298 ash: use boundary.h 535fd46eaa0 a: use boundary.h a8b39528e40 boundary.h: common include file initial commit 1a1a974997c cnt: preboot_keys is not defined, remove call c859f6ce412 vp: verify port in board_ehci_hcd_init c3240f915a4 utc: verify port in board_ehci_hcd_init 88309af334d sp: verify port in board_ehci_hcd_init 3887cbace3e s: verify port in board_ehci_hcd_init 0320ac76051 rc: verify port in board_ehci_hcd_init 5addcb8a8f9 oc: verify port in board_ehci_hcd_init 37f43a51975 nw: verify port in board_ehci_hcd_init 9647623b76c nitrogen6x: verify port in board_ehci_hcd_init ea527297b4a nitrogen6_som2: verify port in board_ehci_hcd_init 264bb9aac2d nitrogen6_max: verify port in board_ehci_hcd_init 7917c09b508 nit6xlite: verify port in board_ehci_hcd_init 1bee7aa09c0 mx6_r: verify port in board_ehci_hcd_init c673a5efbfc mcs: verify port in board_ehci_hcd_init f88f2149f99 jlm: verify port in board_ehci_hcd_init 7156705a0f2 ioc: verify port in board_ehci_hcd_init 94dd2515909 h: verify port in board_ehci_hcd_init eda1d4e0e24 dash: verify port in board_ehci_hcd_init a909f470030 cob: verify port in board_ehci_hcd_init 42507783d91 cnt: verify port in board_ehci_hcd_init ff3f9847077 a: verify port in board_ehci_hcd_init 5c01bde6021 lshore: add 800mhz_4x128mx16.cfg 1c63c1791f1 lshore: add lshore_dl_defconfig ea465e8ab89 lshore: fix DEFCONFIG lshore_solo_defconfig 3af660c1916 itw:remove 3fdd5f6f853 itw: remove 18e5da4daf5 utc: add wlmac d6a837868bd s: verify fuse blown before setting wlmac eb9f0012845 nitrogen6x: add wlmac 920b9ac465c nit6xlite: verify fuse blown before setting bd_addr ea0f4a79a49 nitrogen6x: add wlmac 15db4230150 nitrogen6_som2: add wlmac b92885f64ed nitrogen6_max: add wlmac db316528e02 nit6xlite: verify fuse blown before setting wlmac dd9a345a36a mtp: s/mac/mac_address/ for consistency ffbb65f7134 ls: add wlmac 91a8452a94a jlm: add wlmac 609f222a3bd ioc: add wlmac 532d38ff479 insp: s/mac/mac_addres/ for consistentcy 2343e7d45f8 eo: add wlmac 02eef251f4b bt2: add wlmac 18f923e7264 jlm: fix ISL29023 IRQ pin initialization 29e6d1b47fd nitrogen6x: ubuntu/yocto add bd_addr for bluetooth mac to 6x_bootscript 4426fb61f2c nit6xlite: add bd_addr bluetooth mac environment variable ecf1b4eb0a6 nw: add bd_addr environment variable for bluetooth mac c51912f1b50 nw: remove CONFIG_SYS_I2C_MXC_I2C3 f27f5bc17ec nw: nw does not have I2C3 1c7f3e37044 nw: fix compile error, add bluetooth pins 00630d9904d nw: set board nw2 for nw2 d2315e0de8c ash: use 800mhz for memory 9b2ff102da2 mx6_r: use VDF_LB043 501c8a53234 mcs: use VD_LD101WX1 e57bcda6cd9 cad: use VDF_SPI_QVGA 6017b4b001f nitrogen6sx: LCD should not use FBF_MODESTR cedc6ba7810 fbpanel.h: add VDF_ macros 5be7bec40f1 lshore: fix default environment e53f780549e cfb_console: display version before drawing the logo 901c39d0e3a Revert "ash: delay 150 usec after releasing phy reset" 3d0f7f5c589 ash: delay 150 usec after releasing phy reset 242a7e551b9 lshore: initial addition, Boundary Devices board 32cb5bc3daf sf_params: add IS25WP032/64/128 c6a2d6d7e95 spi: Kconfig: add SPI_FLASH_ISSI 35e80a05818 ash: default uart1 to rs232 41ce5fc45b2 sf-uclass: add spi_dataflash driver option 4a4b09bc47d nitrogen6sx: use _detect directly 23acee9e0dd mcs: pass fbp_detect_gpio 45e6b8bd0b9 nitrogen6x: net_upgrade_fs.txt initial addition dd575043d6e nitrogen6x: net_upgradeu.txt initial addition 022b632af1a itw: update comments 19c585e8dfa fbpanel: VD_INNOLUX_WXGA_14IN_12V/VD_OSD_WSVGA are 18 bit panels d4df92fde35 fbpanel: OSD-WSVGA is JEIDA ad1506e83d4 itw: update splash support bd05d40d6bc splash_source: fix gzip and raw storage checks 62fa1f96c4c itw: displays update a805c5bcfbb fbpanel: use _detect as function, add itw panels 3ef80052498 vp: explicit fbp_detect_i2c c6ce43a86e5 utc: explicit fbp_detect_i2c f474a381c91 usd: explicit fbp_detect_i2c dde1af9a795 ta: explicit fbp_detect_i2c cd740dc4e7d sp: explicit fbp_detect_i2c 0801f74e38a s: explicit fbp_detect_i2c 89eadc1a8e6 rc: explicit fbp_detect_i2c 1e51fdf51ee per: explicit fbp_detect_i2c 2923cd9682b oc: explicit fbp_detect_i2c 74fb2c51c40 nw: explicit fbp_detect_i2c 0d35569b83f nitrogen6x: explicit fbp_detect_i2c b224f04a501 nitrogen6sx: explicit fbp_detect_i2c 09a78a6fb1c nitrogen6_vm: explicit fbp_detect_i2c 7d02ad269a3 nitrogen6_som2: explicit fbp_detect_i2c 7a678af866c nitrogen6_max: explicit fbp_detect_i2c 8ecde109d5b nit6xlite.c: explicit fbp_detect_i2c 1183bf07c36 mx6_r: explicit fbp_detect_i2c bce5449ec8b med: explicit fbp_detect_i2c c4e21b430be mcs: explicit fbp_detect_i2c febd21e512d ls: explicit fbp_detect_i2c c35ad4d216a jlm: explicit fbp_detect_i2c c6e902dbdc9 ioc: explicit fbp_detect_i2c ce106df02bb insp: explicit fbp_detect_i2c 9c069b1f997 h4: explicit fbp_detect_i2c 10ac86008f7 h: explicit fbp_detect_i2c 7a36c93d10e eo: explicit fbp_detect_i2c 4ce81635e44 dash: explicit fbp_detect_i2c 9f02dce7e0f cob: explicit fbp_detect_i2c cee11fe74f3 cnt: explicit fbp_detect_i2c 115114c3ac6 cad: explicit fbp_detect_i2c c7086c03c1f bt2: explicit fbp_detect_i2c 8db523532cb bt: explicit fbp_detect_i2c 6a7305db1d5 ash: explicit fbp_detect_i2c 44a5b1590e0 mcs: remove redundant CONFIG_CMD_GPIO 6385b6bd7b0 a: remove redundant CONFIG_CMD_GPIO c89f87a871a itw: ddr calibration 24f2e534d2a itw: has hdmi input, not camera 9135e5d71d3 itw: use modestr for lcd fcaccf579c4 fbpanel.h: add VD_INNOLUX_WVGA_M cad087a826a itw: LCD is also VD_INNOLUX_WVGA b147ad9c154 itw: add 300Hz 50% pwm for LVDS panels 99ee39a68c0 fbpanel: disable lvds-channel@n if not used 7ce849cef04 itw: renames mostly 72b6da756b7 itw: turn leds off e1ed1e3ba31 itw: fix backlight power control 45dc34881f1 itw.h: make more like nitrogen6x.h a78df29bdea nitrogen6_max.h: make more like nitrogen6x.h 64f77e1b524 nitrogen6x: spacing changes in environment variables cc84a1067b4 itw: add hdmi panels 79a15949c86 fbpanel: add LVDS2 individual panel support ca9cb513e2b crm_regs: add CHSCCDR_CLK_SEL_LDB_DI1 8ec9f5689a8 itw: uses ATHEROS phy AR8035 7df8db0d4ed itw: GP_CPU_RESET is active high, so set low 0c5bb92facb itw: add itw_1g_defconfig b57e32f1e40 nitrogen7: qspi-W25Q128BV initial addition 769d3f63b62 qspi-SST25VF016B: rename, increase to 76 Mhz a80fba2a9fd 6x_upgrade.txt: use sfname to burn correct qspi paramter file f599bcc5e09 spi_flash: add env variable sfname 660fd0725ce 6x_upgrade: add qspi file checks size/tag Change-Id: I54d0642351aecbcf7105963d8cb81165a1e94323 Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> |
||
|---|---|---|
| conf | ||
| recipes-bsp | ||
| recipes-core | ||
| recipes-kernel | ||
| .gitignore | ||
| README | ||
OpenEmbedded/Yocto BSP layer for Freescale's ARM based platforms
This layer provides support for Freescale's ARM based platforms for use with OpenEmbedded and/or Yocto Freescale's BSP layer.
This layer depends on:
URI: git://git.openembedded.org/openembedded-core branch: master revision: HEAD
URI: git://git.yoctoproject.org/meta-freescale branch: master revision: HEAD
Contributing
To contribute to this layer you should the patches for review to the mailing list.
Mailing list:
https://lists.yoctoproject.org/listinfo/meta-freescale
Source code:
https://github.com/Freescale/meta-freescale-3rdparty
When creating a patch of the last commit, use
git format-patch -s --subject-prefix='3rdparty][PATCH' -1
To send it to the community, use
git send-email --to meta-freescale@yoctoproject.org <generated patch>
Patches are normally intended for the master branch.
Patches for other branches should be sent separately so they can be tracked individually in Patchwork and should have the branch name in brackets.
For example, use this to generate a patch for branch 'morty':
git format-patch -s \
--subject-prefix='3rdparty][morty][PATCH' -1