Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
/run is in FILES_${PN} but nothing either populate or even create it.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
When systemd is in DISTRO_FEATURES we have two attempts to create
${localstatedir}/run/openvpn: one at build time with install command and
the other via systemd-tmpfiles at runtime which is enabled by installing
openvpn-volatile.conf. Beside looking redundant, by dropping the build-time
dir creation attempt solves the following error when building images with
both base-files and openvpn:
Error: Transaction check error:
file /var/run conflicts between attempted installs of
openvpn-2.3.9-r0.cortexa7hf_neon_vfpv4 and
base-files-3.0.14-r89.raspberrypi3
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The file was installed but never packaged, ending up in no systemd-tmpfiles
configuration on the final rootfs.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Drop do_compile, default is same
Do not assume that configure is running in S
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
pkgconfig is used so we need to inherit pkgconfig
secondly, base64 support is added for it to work
with musl
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* based on discussion in pndeprecated thread:
https://patchwork.openembedded.org/patch/137573/
update the messages to warn possible users that the
recipe will be removed before the end of the next development
cycle (before Yocto 2.4 is released).
* updated with:
sed -i 's/^\(PNBLACKLIST.*".*\)"/\1 - the recipe will be removed on 2017-09-01 unless the issue is fixed"/g' `git grep PNBLACKLIST | sed 's/:.*//g' | sort -u | xargs`
* then noticed couple recipes being blacklisted only based on
DISTRO_FEATURES, so removed those:
meta-networking/recipes-support/lksctp-tools/lksctp-tools_1.0.17.bb
meta-oe/recipes-connectivity/bluez/bluez-hcidump_2.5.bb
meta-oe/recipes-connectivity/bluez/bluez4_4.101.bb
meta-oe/recipes-connectivity/bluez/gst-plugin-bluetooth_4.101.bb
meta-oe/recipes-navigation/foxtrotgps/foxtrotgps_1.1.1.bb
meta-oe/recipes-navigation/gypsy/gypsy.inc
meta-oe/recipes-navigation/navit/navit.inc
meta-oe/recipes-support/opensync/libsyncml_0.5.4.bb
* if it isn't fixed by this date, it's fair game to be removed
whenever someone gets around to i
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Upgrade curlpp from 0.7.3 to 0.8.1. The main difference between 0.7.x
and 0.8.0 is that it replaces autotools with cmake, see
https://github.com/jpbarrette/curlpp/releases/tag/v0.8.0
The homepage of curlpp on googlecode is obsoleted, so update it and use
soure code repo on github.
Remove dependency boost which is dropped by upstream. And remove extra
CXXFLAGS which has been fixed by upstream.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fix with musl along
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Eliminate references to syscalls not available
for ARM_EABI. Also add a dependency on libseccomp
which is needed for scfilter to work.
Set PACKAGECONFIG to not enable scfilter, since
kernel CONFIG_SECCOMP is unlikely to be set. This
aligns the usage of libseccomp with that of other packages.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The info is taken from CentOS which is usefull
when bind (provides named) and dnsmasq are both
installed and one may fail to start:
| dnsmasq: failed to create listening socket for port 53: Address already in use
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
In the report at http://errors.yoctoproject.org/Errors/Details/130673/
we see the following:
i586-oe-linux-gcc -m32 -march=i586 <snip> netcat.o atomicio.o socks.o `pkg-config --libs libbsd` -lresolv -o nc
/bin/sh: 1: pkg-config: not found
What follows is a bunch of link errors for BSD library functions, as
the backtick didn't return anything but an empty string and hence no
BSD library was involved in the link.
I was able to reproduce this by temporarily removing my host version
of pkg-config, and then validated that this fix solves it while still
having the host binary removed. So it should fix the reported issue.
I also confirmed pkg-config was in the sysroot after the change.
Cc: Khem Raj <raj.khem@gmail.com>
Cc: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Deleted bunch of patches which are not used anymore by any recipe.
Signed-off-by: Oleksandr Kravchuk <oleksandr.kravchuk@pelagicore.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Update packages split rules:
* make libpyldb-util.so* are really packaged into pyldb and pyldb-dev
* set NOAUTOPACKAGEDEBUG which causes all .debug directories are
packaged into pyldb-dbg
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This should fix:
Making all in ui/gtk
| make[2]: Entering directory '/home/jenkins/oe/world/shr-core/tmp-glibc/work/armv5e-oe-linux-gnueabi/wireshark/1_2.2.4-r0/build/ui/gtk'
| /bin/bash: glib-compile-resources: command not found
Fix which glib-compile-resources is picked up. Ensure we use the native glib-2.0p version and not one from the host.
I could not reproduce this but "which glib-compile-resources" pointed out the problem.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The following vulnerabilities have been fixed:
* [1]wnpa-sec-2017-01
The ASTERIX dissector could go into an infinite loop. ([2]Bug
13344)
* [3]wnpa-sec-2017-02
The DHCPv6 dissector could go into a large loop. ([4]Bug 13345)
see: https://www.wireshark.org/docs/relnotes/wireshark-2.2.4.html
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgraded tcpdump to version 4.8.1 and removed deprecated ipv6 configure
flag.
Signed-off-by: Oleksandr Kravchuk <oleksandr.kravchuk@pelagicore.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fetching using http from samba.org is no longer working and changing to https
would fix the issue.
Signed-off-by: Chai, Chong Yi <chong.yi.chai@intel.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
ERROR: fetchmail-6.3.26-r0 do_checkuri: Fetcher failure for URL: 'http://download.berlios.de/fetchmail/fetchmail-6.3.26.tar.xz'. URL http://download.berlios.de/fetchmail/fetchmail-6.3.26.tar.xz doesn't work
ERROR: fetchmail-6.3.26-r0 do_checkuri: Function failed: do_checkuri
ERROR: Logfile of failure stored in: /home/akuster/oss/maint/poky/build/tmp/work/i586-poky-linux/fetchmail/6.3.26-r0/temp/log.do_checkuri.28438
ERROR: Task (/home/akuster/oss/maint/meta-openembedded/meta-networking/recipes-support/fetchmail/fetchmail_6.3.26.bb:do_checkuri) failed with exit code '1'
per homepage:
NEWS: NOW HOSTED BY SOURCEFORGE.NET AFTER BERLIOS SHUTDOWN
The BerliOS developer's website has shut down in the week following 2014 May 12th, and most of the fetchmail contents have been moved to SourceForge.net, including mailing list subscriptions, archives back to 2004, web site contents, download and Git repository. See http://sourceforge.net/projects/fetchmail/.
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The SRC_URI of ctdb is not right for multilib. Replace var 'PN' with
'BPN' to fix it.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Waf doesn't handle -l. Use a function already provided by waf.bbclass
in OE-Core. Inheriting waf.bbclass also makes overriding DISABLE_STATIC
redundant, so drop it from recipes inheriting waf-samba.
Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
When pass option '-h' or '--help' to ifenslave, it calls 'exec man 8
ifenslave' to show help information. But the manual page is missing and
then outputs nothing.
Install the manual page and split it to ifenslave rather than
ifenslave-doc to make option '-h' of ifenslave work.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade drbd-utils from 8.9.3 to 8.9.6.
2) Delete one patch, since the data has been changed.
0001-Makefile.in-don-t-compile-documentation.patch
3) Modify EXTRA_OECONF, since the documentation file is not suitable for cross-compile, so we do not compile it.
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade lksctp-tools from 1.0.16 to 1.0.17.
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade libtevent from 0.9.29 to 0.9.31.
Signed-off-by: Huang Qiyu <huangqy.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade libldb from 1.1.27 to 1.1.29
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade libtdb from 1.3.10 to 1.3.12
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade cifs-utils from 6.4 to 6.6
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade wireshark from 2.2.1 to 2.2.2
Signed-off-by: Zheng Ruoqin <zhengrq.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Fix ALTERNATIVE_PRIORITY to avoid the same priority of the 'nc' utility
with that from busybox.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
This fixes two CVE defects.
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The latest iscsi-initiator-utils has been available for a while now,
update our recipe. The new version no longer bundles its own ISNS server,
so this update brings in open-isns as a dependency.
As open-isns depends on systemd, add systemd to REQUIRED_DISTRO_FEATURES
Additionally, open-iscsi.org is defunct, the new home is at
open-iscsi.com, update the SRC_URI and homepage accordingly.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
By defining 'listen-address' in the global dnsmasq.conf file we
prevent other instances of dnsmasq from using the global config as we
will get an error that the address is already in use. Instead we pass
'local-service' when we start the main dnsmasq instance which will
listen on the loopback address as well as any other local
subnets. This will allow the main dnsmasq instance to play nice with
other instances we might start for network-manager, libvirt, lxc...
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The dnsmasq package installs a ${sysconfigdir}/dnsmasq.d directory but
doesn't currently use any configuration files that might be placed
there. This goes against what the user would expect and doesn't match
what you see in other distros.
We could ensure this config directory is read when dnsmasq is started,
as we are doing here, or by including it in the main dnsmasq.conf
file. By doing it here we can have better reuseability of the main
dnsmasq.conf file by other instances of dnsmasq.
There are currently no files added to the dnsmasq.d directory for core
oe images, so this should not result in any runtime behavior changes.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
curlpp is configured with boost by default. And it searches boost
directory on build machine. If boost is installed on build machine, then
causes qa issue:
| ERROR: curlpp-0.7.3-r0 do_configure: This autoconf log indicates
| errors, it looked at host include and/or library paths while
| determining system capabilities.
Pass the boost directory in ${STAGING_DIR_HOST} to configure script to
disable search on build machine to fix the issue.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
fwknop is a SPA (Single Packet Authorization) scheme for strong
service concealment. Modern alternative to port knocking using
a single encrypted packet for authentification with a firewall.
Signed-off-by: Alexandru Moise <00moses.alexander00@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
The configure is not generated by autotools, and it's
designed to enable ipv6 by default and have option
--disable-ipv6 to disable it, but no --enable-ipv6,
so remove it.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
The deprecated APIs are removed from bitbake, update two old style references
in meta-oe/meta-networking.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Wireshark does not install header files. add install_append
Remove ALLOW_EMPTY & INHIBIT_PACKAGE_DEBUG_SPLIT, they are no longer needed
V2]
add missing libssh and sbc config
V3]
restore removed FILES append and fixed missing sbc in PACKAGECONFIG
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add LDFLAGS variable to Makefile so that extra linker flags can be sent
via this variable.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Set LDFLAGS explicitly for do_compile
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add LDFLAGS variable to Makefile so that extra linker flags can be sent
via this variable.
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Highlight:
- fix CVE-2016-5180
Other changes, from https://c-ares.haxx.se/changelog.html
c-ares version 1.12.0 - Sep 29 2016
Changes:
api: add ARES_OPT_NOROTATE optmask value
Bug fixes:
CVE-2016-5180: ares_create_query single byte out of buffer write
configure: acknowledge --disable-tests [1]
man pages: fix typos detected by Lintian
test: add missing #includes for dns-proto.cc
test: avoid in6addr_* constants
test: Build with MinGW on AppVeyor
Makefile.m32: add support for extra flags
Makefile.m32: add support for CROSSPREFIX
configure: check if tests can get built before enabled
ares_library_cleanup: reset ares_realloc too
ahost.c: add cast to fix C++ compile
test: Only pass unused args to GoogleTest
build: commonize MSVC version detection
msvc_ver.inc: support Visual Studio 2015 Update 1, 2, 3
test: for AF_UNSPEC, return CNAME only for AAAA, but valid A record
ares_getnameinfo: explicitly clear struct servent before use
test: Update fuzzing function prototype
init: fix nsort initialization
test: add fuzzing check script to tests
web: http => https
read_tcp_data: remove superfluous NULL check
LICENSE.md: add a stand-alone license file
SECURITY.md: suggested "security process" for the project
ares_init_options: only propagate init failures from options [2]
headers: remove checks for and defines of variable sizes
test: fix gMock to work with gcc >= 6.x [3]
fix metadata:
We should set SUMMARY instead of DESCRIPTION.
Signed-off-by: André Draszik <git@andred.net>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
With linux kernel v4.8, for file ./src/maint/zntune.c, glibc time.h is
included before linux time.h, when compile zntune.c, it break down by
the following errors:
redefinition of 'struct timespec' 'struct timeval'
'struct timezone' 'struct itimerval'
We should exclude the linux time.h by disable linux/atm_zatm.h and move
some useful definition in linux/atm_zatm.h to a new header file in linux-atm
source code to resolve it.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
A nice tool to directly read, write and interpret ethernet PHY data.
Very useful when debugging PHY or MDIO problems, which ethtool does
not do.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Restore PE
includes 2 security fixes:
wnpa-sec-2016-57. NCP dissector crash. Fixed in 2.2.1.
wnpa-sec-2016-56. Bluetooth L2CAP dissector crash. Fixed in 2.2.1.
see https://www.wireshark.org/docs/relnotes/wireshark-2.2.1.html
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add openssl to default PACKAGECONFIG options so ntp
is configured to have crypto support by default.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Upgrade geoip-perl from 1.45 to 1.50
* Update LIC_FILES_CHKSUM to check LICENSE file instead
of the previous README as no README file in 1.50
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Solve the potential issue for previous commit
<arptables: add arptables systemd service file>: in a small build where
/etc/sysconfig directory doesn't exist, the action of adding default
configuration file (/etc/sysconfig/arptables) will fail.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add arptables systemd service file.
If there isn't any configuration file (/etc/sysconfig/arptables),
add a default configuration file.
Signed-off-by: Li Zhou <li.zhou@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* Add configure option and PACKAGECONFIG for
the following packages:
- acl
- attr
- libaio
- libbsd
- libcap
- valgrind
* They are all optional, so disable by default
or control them based on DISTRO_FEATURES.
* Remove the direct dependency on libaio and libbsd
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Use the source files instead of common-licenses
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Use the source files instead of common-licenses
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Use the source file instead of common-licenses
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Use the source files instead of common-licenses
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
* fixes autodetected dependencies
http://logs.nslu2-linux.org/buildlogs/oe/world/log.report.20160905_011801.log
chrony-2.4: chronyc rdepends on nss, but it isn't a build dependency, missing nss in DEPENDS or PACKAGECONFIG? [build-deps]
chrony-2.4: chrony rdepends on libcap, but it isn't a build dependency, missing libcap in DEPENDS or PACKAGECONFIG? [build-deps]
chrony-2.4: chrony rdepends on nss, but it isn't a build dependency, missing nss in DEPENDS or PACKAGECONFIG? [build-deps]
* also use PACKAGECONFIG_CONFARGS instead of EXTRA_OECONF in do_configure
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* Upgrade tcpreplay from 3.4.4 to 4.1.1
* Update the LICENSE file checksum as the LICENSE
updated to implement GPLv3 license
* Remove the backport and unapplicable patches
- tcpreplay-3.4.4-cross-compile.patch
- tcpreplay-3.4.4-no-bfp-support.patch
- tcpreplay-3.4.4-fix-unable-to-link-libpcap-issue.patch
- tcpreplay-3.4.4-improve-search-for-libpcap.patch are
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
remove unused config params.
Drop PE
Drop do_configure_prepend
update PACKAGECONFIG's for graphics
Signed-off-by: Armin Kuster <akuster808@gmail.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Signed-off-by: Wenzong Fan <wenzong.fan@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade stunnel from 5.28 to 5.35.
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Upgrade strongswan from 5.3.2 to 5.5.0.
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
1) Upgrade openvpn from 2.3.8 to 2.3.9.
2) Modify EXTRA_OECONF, Since the Changelog in the new version shows:
Remove --enable-password-save option
Reflect enable-password-save change in documentation
Also remove second instance of enable-password-save in the man page
3) Fix the Warning:
WARNING: openvpn-2.3.9-r0 do_configure: QA Issue: openvpn: configure was passed unrecognised options: --enable-password-save [unknown-configure-option]
Signed-off-by: Wang Xin <wangxin2015.fnst@cn.fujitsu.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
Add PACKAGECONFIG for ipv6 and control it based
on DISTRO_FEATURES.
Signed-off-by: Jackie Huang <jackie.huang@windriver.com>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Joe MacDonald <joe_macdonald@mentor.com>
