u-boot: Simplify boot script

A patch is backported to check if the firmware loaded a device tree blob
into memory and set the fdt_addr variable if it is found. The U-Boot
script will then read the command line arguments generated by the
firmware from the device tree and boot the kernel with the command
line arguments and the loaded device tree.

This allows things like MAC address, board revision and serial number
to be correctly configured and options in config.txt to be used.

An additional patch is backported and further changes are made to support
this.

Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>

recipes-bsp/rpi-u-boot-scr/files/boot.cmd

@@ -0,0 +1,3 @@
+fdt addr ${fdt_addr} && fdt get value bootargs /chosen bootargs
+fatload mmc 0:1 ${kernel_addr_r} uImage
+bootm ${kernel_addr_r} - ${fdt_addr}

recipes-bsp/rpi-u-boot-scr/files/raspberrypi/boot.cmd

@@ -1,6 +0,0 @@
-setenv fdtfile bcm2708-rpi-b.dtb
-setenv bootargs 'earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd'
-mmc dev 0
-fatload mmc 0:1 ${kernel_addr_r} uImage
-fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}
-bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/rpi-u-boot-scr/files/raspberrypi0/boot.cmd

@@ -1,6 +0,0 @@
-setenv fdtfile bcm2708-rpi-b.dtb
-setenv bootargs 'earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd'
-mmc dev 0
-fatload mmc 0:1 ${kernel_addr_r} uImage
-fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}
-bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/rpi-u-boot-scr/files/raspberrypi2/boot.cmd

@@ -1,6 +0,0 @@
-setenv fdtfile bcm2709-rpi-2-b.dtb
-setenv bootargs 'earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd'
-mmc dev 0
-fatload mmc 0:1 ${kernel_addr_r} uImage
-fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}
-bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/rpi-u-boot-scr/files/raspberrypi3/boot.cmd

@@ -1,6 +0,0 @@
-setenv fdtfile bcm2710-rpi-3-b.dtb
-setenv bootargs 'earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd'
-mmc dev 0
-fatload mmc 0:1 ${kernel_addr_r} uImage
-fatload mmc 0:1 ${fdt_addr_r} ${fdtfile}
-bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/0001-arm-add-save_boot_params-for-ARM1176.patch

@@ -0,0 +1,56 @@
+From 3e10fcde3f3c24a488866dd33fa3f5d46ff3d7a3 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?C=C3=A9dric=20Schieli?= <cschieli@gmail.com>
+Date: Fri, 11 Nov 2016 11:59:06 +0100
+Subject: [PATCH] arm: add save_boot_params for ARM1176
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Implement a hook to allow boards to save boot-time CPU state for later
+use. When U-Boot is chain-loaded by another bootloader, CPU registers may
+contain useful information such as system configuration information. This
+feature mirrors the equivalent ARMv7 feature.
+
+Signed-off-by: Cédric Schieli <cschieli@gmail.com>
+Acked-by: Stephen Warren <swarren@nvidia.com>
+Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
+Upstream-status: Backport
+---
+ arch/arm/cpu/arm1176/start.S | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm/cpu/arm1176/start.S b/arch/arm/cpu/arm1176/start.S
+index a602d4e..7c00201 100644
+--- a/arch/arm/cpu/arm1176/start.S
++++ b/arch/arm/cpu/arm1176/start.S
+@@ -16,6 +16,7 @@
+ 
+ #include <asm-offsets.h>
+ #include <config.h>
++#include <linux/linkage.h>
+ 
+ #ifndef CONFIG_SYS_PHY_UBOOT_BASE
+ #define CONFIG_SYS_PHY_UBOOT_BASE	CONFIG_SYS_UBOOT_BASE
+@@ -37,6 +38,11 @@
+ 	.globl reset
+ 
+ reset:
++	/* Allow the board to save important registers */
++	b	save_boot_params
++.globl	save_boot_params_ret
++save_boot_params_ret:
++
+ 	/*
+ 	 * set the cpu to SVC32 mode
+ 	 */
+@@ -110,3 +116,7 @@ mmu_disable_phys:
+ c_runtime_cpu_setup:
+ 
+ 	mov	pc, lr
++
++WEAK(save_boot_params)
++	b	save_boot_params_ret	/* back to my caller */
++ENDPROC(save_boot_params)
+-- 
+2.1.4
+

recipes-bsp/u-boot/files/0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch

@@ -0,0 +1,156 @@
+From ade243a211d62327e9ebadce27bbbff7981e37f0 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?C=C3=A9dric=20Schieli?= <cschieli@gmail.com>
+Date: Fri, 11 Nov 2016 11:59:07 +0100
+Subject: [PATCH] rpi: passthrough of the firmware provided FDT blob
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Raspberry firmware used to pass a FDT blob at a fixed address (0x100),
+but this is not true anymore. The address now depends on both the
+memory size and the blob size [1].
+
+If one wants to passthrough this FDT blob to the kernel, the most
+reliable way is to save its address from the r2/x0 register in the
+U-Boot entry point and expose it in a environment variable for
+further processing.
+
+This patch just does this:
+- save the provided address in the global variable fw_dtb_pointer
+- expose it in ${fdt_addr} if it points to a a valid FDT blob
+
+There are many different ways to use it. One can, for example, use
+the following script which will extract from the tree the command
+line built by the firmware, then hand over the blob to a previously
+loaded kernel:
+
+fdt addr ${fdt_addr}
+fdt get value bootargs /chosen bootargs
+bootz ${kernel_addr_r} - ${fdt_addr}
+
+Alternatively, users relying on sysboot/pxe can simply omit any FDT
+statement in their extlinux.conf file, U-Boot will automagically pick
+${fdt_addr} and pass it to the kernel.
+
+[1] https://www.raspberrypi.org/forums//viewtopic.php?f=107&t=134018
+
+Upstream-Status: Backport
+
+Signed-off-by: Cédric Schieli <cschieli@gmail.com>
+Acked-by: Stephen Warren <swarren@nvidia.com>
+Signed-off-by: Jonathan Liu <net147@gmail.com>
+---
+ board/raspberrypi/rpi/Makefile        |  1 +
+ board/raspberrypi/rpi/lowlevel_init.S | 36 +++++++++++++++++++++++++++++++++++
+ board/raspberrypi/rpi/rpi.c           | 29 ++++++++++++++++++++++++++++
+ 3 files changed, 66 insertions(+)
+ create mode 100644 board/raspberrypi/rpi/lowlevel_init.S
+
+diff --git a/board/raspberrypi/rpi/Makefile b/board/raspberrypi/rpi/Makefile
+index 4ce2c98..dcb25ac 100644
+--- a/board/raspberrypi/rpi/Makefile
++++ b/board/raspberrypi/rpi/Makefile
+@@ -5,3 +5,4 @@
+ #
+ 
+ obj-y	:= rpi.o
++obj-y	+= lowlevel_init.o
+diff --git a/board/raspberrypi/rpi/lowlevel_init.S b/board/raspberrypi/rpi/lowlevel_init.S
+new file mode 100644
+index 0000000..cdbd8e1
+--- /dev/null
++++ b/board/raspberrypi/rpi/lowlevel_init.S
+@@ -0,0 +1,36 @@
++/*
++ * (C) Copyright 2016
++ * Cédric Schieli <cschieli@gmail.com>
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <config.h>
++
++.align 8
++.global fw_dtb_pointer
++fw_dtb_pointer:
++#ifdef CONFIG_ARM64
++	.dword 0x0
++#else
++	.word 0x0
++#endif
++
++/*
++ * Routine: save_boot_params (called after reset from start.S)
++ * Description: save ATAG/FDT address provided by the firmware at boot time
++ */
++
++.global save_boot_params
++save_boot_params:
++
++	/* The firmware provided ATAG/FDT address can be found in r2/x0 */
++#ifdef CONFIG_ARM64
++	adr	x8, fw_dtb_pointer
++	str	x0, [x8]
++#else
++	str	r2, fw_dtb_pointer
++#endif
++
++	/* Returns */
++	b	save_boot_params_ret
+diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
+index 6245b36..ffd6d31 100644
+--- a/board/raspberrypi/rpi/rpi.c
++++ b/board/raspberrypi/rpi/rpi.c
+@@ -25,6 +25,9 @@
+ 
+ DECLARE_GLOBAL_DATA_PTR;
+ 
++/* From lowlevel_init.S */
++extern unsigned long fw_dtb_pointer;
++
+ static const struct bcm2835_gpio_platdata gpio_platdata = {
+ 	.base = BCM2835_GPIO_BASE,
+ };
+@@ -285,6 +288,31 @@ static void set_fdtfile(void)
+ 	setenv("fdtfile", fdtfile);
+ }
+ 
++/*
++ * If the firmware provided a valid FDT at boot time, let's expose it in
++ * ${fdt_addr} so it may be passed unmodified to the kernel.
++ */
++static void set_fdt_addr(void)
++{
++	if (getenv("fdt_addr"))
++		return;
++
++	if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
++		return;
++
++	setenv_hex("fdt_addr", fw_dtb_pointer);
++}
++
++/*
++ * Prevent relocation from stomping on a firmware provided FDT blob.
++ */
++unsigned long board_get_usable_ram_top(unsigned long total_size)
++{
++	if ((gd->ram_top - fw_dtb_pointer) > SZ_64M)
++		return gd->ram_top;
++	return fw_dtb_pointer & ~0xffff;
++}
++
+ static void set_usbethaddr(void)
+ {
+ 	ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1);
+@@ -356,6 +384,7 @@ static void set_serial_number(void)
+ 
+ int misc_init_r(void)
+ {
++	set_fdt_addr();
+ 	set_fdtfile();
+ 	set_usbethaddr();
+ #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+-- 
+2.10.2
+

recipes-bsp/u-boot/files/0003-Include-lowlevel_init.o-for-rpi2.patch

@@ -0,0 +1,25 @@
+From 1eb01436bc57ad32519a4567a1c9ec82d52d60a1 Mon Sep 17 00:00:00 2001
+From: Paul Barker <paul@paulbarker.me.uk>
+Date: Tue, 29 Nov 2016 19:47:49 +0000
+Subject: [PATCH] Include lowlevel_init.o for rpi2
+
+Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
+Upstream-status: Inappropriate
+    (not needed upstream as rpi_2 board directory is removed in latest
+    version)
+---
+ board/raspberrypi/rpi_2/Makefile | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/board/raspberrypi/rpi_2/Makefile b/board/raspberrypi/rpi_2/Makefile
+index d82cd21..9f865c5 100644
+--- a/board/raspberrypi/rpi_2/Makefile
++++ b/board/raspberrypi/rpi_2/Makefile
+@@ -5,3 +5,4 @@
+ #
+ 
+ obj-y	:= ../rpi/rpi.o
++obj-y	+= ../rpi/lowlevel_init.o
+-- 
+2.1.4
+

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1 +1,7 @@
+FILESEXTRAPATHS_prepend_rpi := "${THISDIR}/files:"
 RDEPENDS_${PN}_append_rpi = " rpi-u-boot-scr"
+SRC_URI_append_rpi = " \
+    file://0001-arm-add-save_boot_params-for-ARM1176.patch \
+    file://0002-rpi-passthrough-of-the-firmware-provided-FDT-blob.patch \
+    file://0003-Include-lowlevel_init.o-for-rpi2.patch \
+    "