linux-firmware: Remove as replaced by linux-firmware-raspbian

Signed-off-by: Andrei Gherzan <andrei@gherzan.com>

recipes-kernel/linux-firmware/files/brcmfmac43430-sdio.txt

@@ -1,59 +0,0 @@
-# NVRAM file for BCM943430WLSELG
-# 2.4 GHz, 20 MHz BW mode
-
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0726
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0726
-boardrev=0x1202
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-boardflags3=0x08000000
-xtalfreq=37400
-#xtalfreq=19200
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=84
-txpwrbckof=6
-cckbw202gpo=0
-legofdmbw202gpo=0x66111111
-mcsbw202gpo=0x77711111
-propbw202gpo=0xdd
-
-# OFDM IIR :
-ofdmdigfilttype=18
-ofdmdigfilttypebe=18
-# PAPD mode:
-papdmode=1
-papdvalidtest=1
-pacalidx2g=32
-papdepsoffset=-36
-papdendidx=61
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
-muxenab=0x1
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-
-#VCO freq 326.4MHz
-spurconfig=0x3 

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -1,26 +0,0 @@
-FILESEXTRAPATHS_prepend_rpi := "${THISDIR}/files:"
-
-SRC_URI_append_rpi = " \
-    file://brcmfmac43430-sdio.bin \
-    file://brcmfmac43430-sdio.txt \
-"
-
-do_install_append_rpi() {
-    # Overwrite v7.45.41.26 by the one we currently provide in this layer
-    # (v7.45.41.46)
-    local _firmware="brcmfmac43430-sdio.bin"
-    local _oldmd5=9258986488eca9fe5343b0d6fe040f8e
-    if [ "$(md5sum ${D}${nonarch_base_libdir}/firmware/brcm/$_firmware | awk '{print $1}')" != "$_oldmd5" ]; then
-        _firmware=""
-        bbwarn "linux-firmware stopped providing brcmfmac43430 v7.45.41.26."
-    else
-        _firmware="${WORKDIR}/$_firmware"
-    fi
-
-    mkdir -p ${D}/${nonarch_base_libdir}/firmware/brcm
-    install -m 0644 $_firmware ${WORKDIR}/brcmfmac43430-sdio.txt ${D}${nonarch_base_libdir}/firmware/brcm
-}
-
-FILES_${PN}-bcm43430_append_rpi = " \
-    ${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.txt \
-"