Some of them were introduced by mass-removal of S = WORKDIR/git assignments;
rather than try to fix up (or redo) just these, I've run this sed command over
the whole tree:
sed -i -z -E 's/([ \t\f\v\r]*\n){3,}/\n\n/g' `find . -name *.bb -o -name *.inc`
The rationale is that more than one empty line is wasting vertical screen space, and
does nothing for readability.
Signed-off-by: Alper Ak <alperyasinak1@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
With:
https://lists.openembedded.org/g/bitbake-devel/message/17508
there are WARNINGs like:
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:21 has a lack of whitespace around the assignment: 'PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:22 has a lack of whitespace around the assignment: 'PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:23 has a lack of whitespace around the assignment: 'PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:24 has a lack of whitespace around the assignment: 'PITFT28c="${@bb.utils.contains("MACHINE_FEATURES", "pitft28c", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:25 has a lack of whitespace around the assignment: 'PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:27 has a lack of whitespace around the assignment: 'VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb: meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb:38 has a lack of whitespace around the assignment: 'WM8960="${@bb.utils.contains("MACHINE_FEATURES", "wm8960", "1", "0", d)}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:14 has a lack of whitespace around the assignment: 'export CC7="${CC}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:15 has a lack of whitespace around the assignment: 'export LD7="${LD}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:16 has a lack of whitespace around the assignment: 'export OBJCOPY7="${OBJCOPY}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:17 has a lack of whitespace around the assignment: 'export OBJDUMP7="${OBJDUMP}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:18 has a lack of whitespace around the assignment: 'export CC8="${CC}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:19 has a lack of whitespace around the assignment: 'export LD8="${LD}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:20 has a lack of whitespace around the assignment: 'export OBJCOPY8="${OBJCOPY}"'
WARNING: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb: meta-raspberrypi/recipes-bsp/armstubs/armstubs.bb:21 has a lack of whitespace around the assignment: 'export OBJDUMP8="${OBJDUMP} -maarch64"'
Signed-off-by: Martin Jansa <martin.jansa@gmail.com>
Current configuration hard-code the values of the CAN interrupt pins. This setting allows to change them. The default values are the same as before.
Signed-off-by: Damiano Ferrari <damiano.ferrari@ferrarigrowtech.com>
Add a patch to reintroduce configuration start_x. This patch has
been submitted to the upstream of of the RPi-config GitHub repo:
https://github.com/Evilpaul/RPi-config/pull/8
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Upgrade to the latest version of the repository with includes the
following improvements of the template for config.txt:
- update revision and date stamp
- additon of dtoverlay
- general updates
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
When RPI_USE_U_BOOT is set to 1, if enable_uart is not set to 1 in config.txt
then the board won't boot (Resolves agherzan#1189).
This requirement only affects the following boards:
- Raspberry Pi Zero W
- Raspberry Pi 3 32 & 64 bit
- Raspberry Pi 4 32 & 64 bit
Signed-off-by: DOLE Olivier <odole@dicksondata.fr>
- Feature is enabled with ENABLE_GPIO_SHUTDOWN variable
- Include the gpio-shutdown overlay
- If using SysV init include the additional keymap and inittab entries
to bind the KEY_POWER event
- Systemd init does not require any additional bindings
Signed-off-by: Otto Esko <otto.esko@gmail.com>
The Raspberry Pi firmware does not support lines exceeding 80 bytes.
This is documented at https://www.raspberrypi.com/documentation/computers/config_txt.html#file-format
It seems that comments can be longer but it's still best to avoid this
problem instead of debug it. Detect the situation in do_deploy_append
and bbwarn if the limit is exceeded.
Connected to #917
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
This is the result of automated script conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
By default in case of CM4 IO board, the USB ports (header + built-in)
are disabled. In order to enable them the DWC2 mode needs to be set to
host.
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
* instead of repeating //config.txt
so many times, to make it a bit less error prone (as shown in previous commit)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* in https://github.com/agherzan/meta-raspberrypi/pull/678 this line was acidentally changed
from "${BOOTFILES_DIR_NAME}" to "bcm2835-bootfiles", causing do_deploy to fail finding config.txt
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
It seems like "start_x=1" needs to be earlier in the file to work properly on the Rapberry Pi 4 B.
Fixes: #670
Signed-off-by: SCVready <alejandro.solozabal@outlook.com>
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board).
Signed-off-by: Jakub Luzny <jakub@luzny.cz>
Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
When we read the docs, we have the feelings that theses variables are
boolean ones. So I was setting, for example in my distro.conf file the
variable ' ENABLE_I2C = "1" ' to enable I2C. Then I wanted to disable it
by simply setting 'ENABLE_I2C' to "0" but it wasn't working. So I
noticed that, for example, ' ENABLE_UART ' was checked with ' = "1" '
condition and some other "boolean" was checked against ' -n ' like for
ENABLE_I2C.
This commit tries to have an uniform behavior for all variables that are
shown in the doc under the format ' VARIABLE = "1" ' to enable them and
the reader can think they are kind of 'boolean' values.
Signed-off-by: Joël Carron <joel.carron@eeproperty.ch>
vc4-fkms-v3d needs dispmanx, its DRM VC4 V3D driver on top of the dispmanx
display stack, this does not work with 4.14 kernel and since we always
use vc4graphics on 64bit, just keep using vc4-kms-v3d dtbo which should
enable right graphics
Tested with core-image-sato, running glxgears with 55.5fps in
raspberrypi3-64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Added support for and documented the following new extra build options:
* gpu_freq overclocking option
* disable boot rainbow splash screen
* configure the boot delay after GPU firmware loading
* configure common HDMI and composite video options
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
The variable RPI_EXTRA_CONFIG can be set in local.conf to append text to the
Raspberry Pi config.txt file as described in the documentation.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Use correct overlay for enabled vc4 accelaration
This enable 3D accelaration over dispmanx on vc4/rpi64
Enable audio over HDMI
Disable overscan to avoid graphics glitches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
