This packages only the firmware needed for the RaspberryPi boards. We use the
RPi-Distro as it's already maintained by the Raspbian guys and we get better
support for the RaspberryPi needed firmwares.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
Contains the following changes:
7f9c648dad64 drm/vc4: Move IRQ enable to PM path
ffd7bf4085b0 lan78xx: Move enabling of EEE into PHY init code
4d926e896df0 lan78xx: Don't reset the interface on open
a782353cc190 lan78xx: Connect phy early
6f3325193ecf net: lan78xx: Allow for VLAN headers in timeout.
75f7f0c22544 lan78xx: Ignore DT MAC address if already valid
d01915873578 lan78xx: Read LED states from Device Tree
1ad1d52e6cb6 usb: dwc_otg: fix memory corruption in dwc_otg driver
The crucial commit from above is
7f9c648dad64 drm/vc4: Move IRQ enable to PM path
which fixes an unbalanced IRQ enable warning, which was rapported
in #286
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Signed-off-by: Gunnar Andersson <gandersson@genivi.org>
Currently, we are installing the rpi custom txt and fw files whenever
the meta-raspberrypi layer is included in bblayers.conf. This breaks
other machines that need to use the bcm43430 drivers but with alternate
txt or fw files.
Install these files only when "rpi" is in MACHINEOVERRIDES.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
There is no reason to continue supporting pre-4.8 series kernels so we can move
the setting of LOADADDR to the common inc file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There is no need to have 2 separate inc files any more and the existing code has
several duplications.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The code to determine if we need to depend on lzop-native will fail as the local
defconfig file no longer exists.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The only remaining function in linux-raspberrypi-base was split_overlays() which
is used in the sdcard_image-rpi class. So we can move this function over and
drop the now-empty linux-raspberrypi-base class.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* The kerneltype variable is not used anywhere after being set.
* The manipulation of KERNEL_DEVICETREE is effectively a no-op, we read the
current value in get_dts() and store this back into the same variable.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The version of this firmware provided by linux-firmware is 7.45.41.26. This
version seems to have connectivity issues when bonding interfaces. Raspbian
included an updated version (7.45.41.46) which tested, proved to fix this
problem (see https://github.com/resin-os/meta-resin/issues/812).
The version Raspbian is providing is not yet in linux-firmware as they have it
directly from Cypress (see https://github.com/RPi-Distro/repo/issues/88).
Besides the issue described above, it fixes various other issues including a
broadpwn fix.
Hopefully this version, or a newer one, will end up in upstream soon. In order
to catch when that happens and stop overwriting this firmware, a check is added
in the racipe based on the md5sum of the current shipped firmware.
In terms of ditribution license, we got an informal one in the github thread
mentioned above.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
OE currently builds dtb files with its own custom targets by
specifying each dtb file as makefile target, this creates bad
dtb for rpi64 bit. This patch calles 'make dtbs' at the end
which regenerates the correct dtb files
This makes the vc4 initialize properly on rpi64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
In tree configurations are now used to build the kernel and
it is possible to extend the config via bbappend and cfg fragments
Fix issue 14
Signed-off-by: Andrea Ghittino <aghittino@gmail.com>
* bitbake is using re.match, so raspberrypi actually matches with anything
^raspberrypi.* which currently works, but it will also match with hypothetical
raspberrypi-is-no-more-this-is-banana-now MACHINE which isn't intended by
this COMPATIBLE_MACHINE.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This should avoid network traffic to resolve ${AUTOREV} unless this
recipe is explicitly selected as the preferred provider of
virtual/kernel.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
currently there is no way to override the default CMDLINE,
this variable needs to be set only if the developer didn't set it already from
another layer.
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
The rpi-4.4.y branch has been unmaintained for a couple of months now.
Let's drop it before branching for pyro.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This makes the linux-raspberrypi_dev recipe more flexible by allowing
the kernel branch to be overridden in local.conf.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The development branches of linux-raspberrypi are rebased frequently. To
avoid fetch failures caused by out-of-date git hashes we need to use
AUTOREV.
LINUX_VERSION may need to be overridden in local.conf to match the
upstream version.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Currently the firmware is installed but kernel fails to load it
due this .txt file missing in the firmware directory and it ends
up with wifi/bluetooth i/f not being initialized. The error is
also in dmesg
[ 3.120991] usbcore: registered new interface driver brcmfmac
[ 3.148240] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2
After applying this patch now ifconfig -a can list wlan0 interface
successfully.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
