From the documentation:
SERIAL_CONSOLES - Provide a value that specifies the baud rate followed by
the TTY device name separated by a semicolon. Use spaces to separate
multiple devices
Fixes build error of `systemd-serialgetty` after recent commit 8218bec.
See: <https://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-SERIAL_CONSOLES>
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
The repository used by u-boot-rpi has not been updated since 2012. In the
meantime, mailine u-boot has gained Raspberry Pi support. All we need to do is
set UBOOT_MACHINE to an appropriate value in the machine config files.
Currently configs are only provided for raspberrypi and raspberrypi2. The master
branch of u-boot now also appears to have a config file for raspberrypi3 so
support for this can be added in the future when u-boot is upgraded in oe-core.
The mainline u-boot recipe creates the file "u-boot.bin" instead of
"u-boot.img".
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
The latest raspberrypi3 puts its console on ttyS0 instead of ttyAMA0 (like all
the preceding boards). Therefore pull this definition out of the common
include file and add it separately for each MACHINE.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reformat the tune-arm1176jzf-s.inc file.
There is not 'PACKAGE_EXTRA_ARCHS_tune-armv6hf-vfp'. Replace it by
'PACKAGE_EXTRA_ARCHS_tune-armv6hf'.
Change-Id: I0dd63b1dd3e1ebc7fe0600e93fb9d27a6a833cd9
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
*.conf files should hold board specific stuff while rpi-base.inc should
include configuration that is common for all Raspberry Pi boards.
Remove MACHINE_KERNEL_PR as we don't use it anymore.
Minor tweaks.
Change-Id: I5e1b12c1d224ac003d2890544beb036f1d5d8643
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Compile overlay device trees and put them in 'overlays/' folder
on sdcard RPi boot partition.
Change-Id: I3da0032b3c2618165008eec1fc94e97824d09099
Signed-off-by: Francois Muller <francois@concept-embarque.fr>
[RPi DT info] https://github.com/raspberrypi/documentation/blob/master/configuration/device-tree.md#part-3-using-device-trees-on-raspberry-pi
RPi bootloader detects a DT-ready kernel by checking for a specific trailer in kernel.img.
Using latest raspberrypi/firmware (firmware.inc) enables this check ability.
Using latest raspberrypi/tools (rpi-mkimage.bb) gives access to mkknlimg for adding the
required trailer to kernel image.
If KERNEL_DEVICETREE is filled in, the trailer is added to the kernel image before
kernel install task. While creating the SDCard image, this modified kernel is
put on boot partition (as kernel.img) as well as DeviceTree blobs (.dtb files).
If KERNEL_DEVICETREE is empty, this new process isn't operated, legacy one does.
KERNEL_DEVICETREE for RPi is really supported only starting from linux-rapsberry 3.18+
kernels, so as for now it defaults to empty (in machine config file).
Change-Id: Ifea71bbda729b8f3c47be7ba0ba03be5ad2ceeaa
Signed-off-by: Francois Muller <francois@concept-embarque.fr>
Add IMAGE_BOOT_FILES that defines a list of files to be placed in boot
partition. The variable is effectivey used with wic when building a SD
card image.
Change-Id: Ie7b2ea032349bf33ce7a9afc70e2fb4806ff9a04
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Acked-by: Andrei Gherzan <andrei@gherzan.ro>
Instead of overriding the default psplash image, the raspberrypi image is added
as an additional image. It is then set as the default in the raspberrypi machine
config file so that other targets do not pick up our splash image.
Tested on raspberrpi and qemuarm: on raspberrypi I see to Raspberry Pi logo, on
qemuarm I see the Yocto Project logo.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
It makes no sense to have distro related configurations in a BSP
layer. So let's have these common parts (provides, version etc)
in machine directory instead.
[GITHUB #73]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
All PREFERRED_* variables were moved to an .inc file to have variables
clearer.
Inherit .inc files and remove PREFERRED_* variables.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
This variable was dropped:
commit 0504d36646f8def4829250a9eee0cf9bac3b756e
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Tue May 10 16:19:02 2011 +0100
bitbake.conf: Drop unused *GUI* and MACHINE_DISPLAY variables
(From OE-Core rev: baf136a9c95a94c5bf89c9a818960d616439682c)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
It seems like rpi kernel doesn't work well with newer udev version so
we set 164 as preferred version for it.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
RaspberryPi has no hardware clock, this is why hwclock initscript from
busybox fails at boot. So make sure we don't have this init script
to avoid errors at boot.
[GITHUB #21]
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
It's a bug in the latest bootloader where rpi doesn't boot
with zImage. Use uncompressed kernel type.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Instead of being inherited by a specific image recipe, this class can
now be inherited globally in the machine configuration, allowing it to
be used with any image. This means we can remove "inherit image", and
we can also remove the IMAGE_FSTYPES modification since the machine
config does this already.
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
