On fido and earlier branches, ${libexecdir} depends on ${BPN} so it
is not a good choice as ${libexecdir} is different depending on the
recipe name.
For example, rpi-mkimage would install mkknlimg to:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage
but linux-raspberrypi would look for mkknlimg in the path:
[...]/sysroots/x86_64-linux/usr/lib/linux-raspberrypi
To resolve this, we use ${bindir} instead as it doesn't depend on
${BPN} in fido and earlier branches as well as in the master branch.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Add basic support for PiTFT display by using device-trees.
In order get it working below configurations must be active in
local.conf:
MACHINE_FEATURES += "pitft"
- This will enable SPI bus and i2c device-trees, it will also setup
framebuffer for console and x server on PiTFT.
[Support #70]
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Ensure that it's possible to add MACHINE_FEATURES from places that will
be executed before rpi-base.inc (like e.g. local.conf), without having
them overrided.
Signed-off-by: Petter Mabäcker <petter@technux.se>
With newer kernels (>=3.18) that supports device-trees I2C
should be enabled with device-trees.
This is now support by adding:
ENABLE_I2C = "1"
in local.conf
This will enable the dtparams:
i2c1
i2c_arm
Signed-off-by: Petter Mabäcker <petter@technux.se>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
It doesn't make sense to install to ${libexecdir}/rpi-mkimage as it
changes the path on fido and earlier branches from:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage
to:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage/rpi-mkimage
Using ${libexecdir} instead of ${libexecdir}/rpi-mkimage preserves
the path for fido and earlier.
Signed-off-by: Jonathan Liu <net147@gmail.com>
The rpi-mkimage tools are installed ${libexecdir}/rpi-mkimage within
native sysroot, where ${libexecdir} resolves to /usr/libexec. This caused
the build to fail due to recipe trying to access ${libdir}/mkimage. Fix
the paths to use an unambiguous STAGING_LIBEXECDIR_NATIVE so that a
proper location is used.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
The rpi-mkimage tools are installed ${libexecdir}/rpi-mkimage within
native sysroot, where ${libexecdir} resolves to /usr/libexec. This caused
the build to fail due to recipe trying to access ${libdir}/mkimage. Fix
the paths to use an unambiguous STAGING_LIBEXECDIR_NATIVE so that a
proper location is used.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
For consistency with other recipes that look for mkimage
tools (u-boot-rpi, linux-raspberrypi) under ${libexecdir}/rpi-mkimage,
make sure that the tools are installed at the proper location.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
RTIMULib is a C++ and Python library that makes it easy to use
9-dof and 10-dof IMUs with embedded Linux systems. Python
module for Raspberry Pi Sense HAT depends on it.
Python module python-rtimu uses the source code from the
GitHub repository of RPi-Distro.
Signed-off-by: Leon Anavi <leon@anavi.org>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Python module to control the Raspberry Pi Sense HAT used in
the Astro Pi mission. This recipe provides the officially
supported library for the Sense HAT with access to all of the
on-board sensors and the LED matrix.
Signed-off-by: Leon Anavi <leon@anavi.org>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
This file has been wrongly introduced in commit 72ea51f.
Gianfranco Costamagna <costamagnagianfranco@yahoo.it>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
With the newer kernels that use device tree, the SPI bus is only
enabled by a device tree setting. This is now supported by adding
ENABLE_SPI_BUS = "1"
in local.conf
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
The update of the kernel in 10a5bace87 to
3.18.16 missed the separate rtc overlays being replaced by the i2c-rtc
overlay.
Signed-off-by: Jonathan Liu <net147@gmail.com>
vcos headers include headers like "vcos_platform.h" "vcos_futex_mutex.h"
"vcos_platform_types.h" and these headers are different based on
platform/OSes. e.g. OS targets that support pthreads these headers
should come from pthreads/ folder but not for others. So one would add
right -I option for every package that accesses them directly or
indirectly. so if a software does #include <EGL/egl.h> then it will
break
| In file included from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos_assert.h:149:0,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos.h:114,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vmcs_host/vc_dispmanx.h:33,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/EGL/eglplatform.h:110,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/EGL/egl.h:36,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/../shared/platform.h:29,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/window.h:33,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/eventdemo.c:40:
|
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos_types.h:38:33:
fatal error: vcos_platform_types.h: No such file or directory
| #include "vcos_platform_types.h"
| ^
| compilation terminated.
This is wrong, it should not happen since doing simple #include
<EGL/egl.h> should not demand manual addition of some internal paths
tobe added to -I flags.
This patch fixes the headers which refer to headers inside pthreads/
folder to prefix them with pthreads/ so we dont have to specify
additional paths
This fixes weston on rpi and I believe there are more patches now to
recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
recipes-multimedia/omxplayer/omxplayer_git.bb
which can be removed as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
several userspace libraries like libepoxy poke for pkgconfigs ( .pc )
files to detect egl support, and comes out to fail in configure stage,
one of the patches now adds support to generate .pc files for some known
cases. it could be further extended if needed for other libraries too
Secondly, the default CMAKE_INSTALL_PREFIX is /opt/vc but in OE we use
proper /usr so lets make this change as well, it simplifies do_install()
.so are not versioned so we need to grapple with OE's defaults of
expecting versioned .so files.
Adjust packages for -dev package such that it can automatically package
pkgconfig files and inherit pkgconfig because in cmake code we are not
looking for pkgconfig so we need the dependency also put in place for
consistent builds
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This requires some changes to KERNEL_DEVICETREE as the dtb
layout has changed to support overlays. This change also
makes us ready to support kernel 4.x series
Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk>
The patch was rebased to apply on the updated version.
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Building userland source with gcc 5.x causes multiple issues such as:
vcos_thread.h:186:15: warning: inline function 'vcos_thread_get_affinity' declared but never defined
| VCOS_UNSIGNED vcos_thread_get_affinity(VCOS_THREAD_T *thread);
The following patches fixes these issues and allows building userland on the current
poky master branch.
Signed-off-by: Tom Doehring <toolmmy@googlemail.com>
Update to latest revision in order to get rid of the integration patch
'0001-handle-install-data-hook-when-cross-compile.patch' that has been
submitted upstream.
Changes since cd318cd63031a30249a4c08435b97263fa76d7b7:
bce7c1b Merge pull request #45 from Technux/dev/technux
74510ff Display an error message if unable to open mbox
53197ca handle install-data-hook when cross compile
Signed-off-by: Petter Mabäcker <petter@technux.se>
