Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env
in the /boot partition when using U-Boot. This change is required
to successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Temporary remove the LIRC patch because it is not compatible with
version 0.9.4d which is at the moment provided by branch dunfell
from meta-openembedded/meta-oe. This patch should be applied again
when LIRC version 0.10.1 or newer is available at branch dunfell
of meta-openembedded/meta-oe (as of the moment this version is
available at master).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Apply Raspberry Pi specific fix to use LIRC with gpio-ir kernel
module with which the signal from /dev/lircX is slightly different
from that of lirc_dev (which was used with older LIRC and kernel
versions). The patch has been published by neuralassembly and he
has shared more details in the Raspberry Pi community forum:
https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=235256
LIRC ticket #359 tracks the upstreaming of this issue:
https://sourceforge.net/p/lirc/tickets/359/
Co-authored-by: neuralassembly <neuralassembly@gmail.com>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to
support peripherals for sending and receiving infrared signals.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Corrects README.md to indicate that the new generated image extension is
.wic.bz2 rather than sdimg as previously stated.
Signed-off-by: Brandon Verkamp <jadelclemens@gmail.com>
Add kernel modules i2c-dev and i2c-bcm2708 to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1.
This affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This simply causes build warnings about priority of two packages being
same, but infact this is redundant, therefore remove setting ALTERNATIVE_PRIORITY
for psplash-raspberrypi
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add kernel modules, including i2c-dev and i2c-bcm2708, to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will
be present in all images based on packagegroup-core-boot,
including the core-image-minimal image.
Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS
they will be added only in images based on packagegroup-base,
which does not include the core-image-minimal or
core-image-full-cmdline images.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Will let system hibernate and suspend, its initial setup, there is more
work needed to get it going fully without problems in userspace, which
will follow
Signed-off-by: Khem Raj <raj.khem@gmail.com>
perf fails to build without bfd patch still, therefore apply it to 5.4
as well.
Update to latest on 5.4 branch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
5.4 is slated to be next hop for linux-raspberrypi, here add the
recipes, default is still 4.19, we can switch that later
Signed-off-by: Khem Raj <raj.khem@gmail.com>
pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed
to miniuart-bt in 2014, now with 5.4 these are not recognised anymore
and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Add instructions how to auto-load I2C kernel modules with
KERNEL_MODULE_AUTOLOAD when I2C is enabled.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
- Refresh patches
- userland now needs to create symlinks for egl.pc,glesv2.pc and vg.pc
when vc4 is not used
Signed-off-by: Khem Raj <raj.khem@gmail.com>
mesa wl_drm protocol is the backend for wayland server side which requires
the dmabuf modifiers for some DRM formats on specific devices like RPI.
Currently there is no support of giving any dmabuf modifiers on wl_drm protocol.
This dma_buf modifiers allows EGL implementations to add extra attributes
to drm_fourcc format.
Upstream-Status: Pending
Signed-off-by: Balaji Velmurugan <balaji.velmurugan@ltts.com>
