Fixes:
ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure: Unable to find revision 856e83151cf3f802c495585ac176bb135a08030f in branch rpi-5.4.y even from upstream
ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;branch=rpi-5.4.y'. Unable to fetch URL from any source.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env
in the /boot partition when using U-Boot. This change is required
to successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Rename LIRC bbappend file to match only version 0.10.1 because the
applied patch is not compatible with older LIRC versions.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Use lircd systemd service similar to the one in Raspbian. Start
lircd with argument --nodaemon after lircd-setup.service.
Edit device in /etc/lirc/lirc_options.conf to switch between
receive and transmit modes (lircd must be restarted after such
change).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add kernel modules gpio-ir and gpio-ir-tx to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1.
Variable ENABLE_IR enables infrared support (for LIRC). This
change affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Move lirc to dynamic-layers/meta-python/recipes-connectivity/ to
avoid related issues while building rpi-basic-image.
Reported-by: Alan <engineer@iotexpert.com>
Suggested-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Apply Raspberry Pi specific fix to use LIRC with gpio-ir kernel
module with which the signal from /dev/lircX is slightly different
from that of lirc_dev (which was used with older LIRC and kernel
versions). The patch has been published by neuralassembly and he
has shared more details in the Raspberry Pi community forum:
https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=235256
LIRC ticket #359 tracks the upstreaming of this issue:
https://sourceforge.net/p/lirc/tickets/359/
Co-authored-by: neuralassembly <neuralassembly@gmail.com>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to
support peripherals for sending and receiving infrared signals.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Corrects README.md to indicate that the new generated image extension is
.wic.bz2 rather than sdimg as previously stated.
Signed-off-by: Brandon Verkamp <jadelclemens@gmail.com>
Add kernel modules i2c-dev and i2c-bcm2708 to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1.
This affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This simply causes build warnings about priority of two packages being
same, but infact this is redundant, therefore remove setting ALTERNATIVE_PRIORITY
for psplash-raspberrypi
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add kernel modules, including i2c-dev and i2c-bcm2708, to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will
be present in all images based on packagegroup-core-boot,
including the core-image-minimal image.
Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS
they will be added only in images based on packagegroup-base,
which does not include the core-image-minimal or
core-image-full-cmdline images.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Will let system hibernate and suspend, its initial setup, there is more
work needed to get it going fully without problems in userspace, which
will follow
Signed-off-by: Khem Raj <raj.khem@gmail.com>
perf fails to build without bfd patch still, therefore apply it to 5.4
as well.
Update to latest on 5.4 branch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
5.4 is slated to be next hop for linux-raspberrypi, here add the
recipes, default is still 4.19, we can switch that later
Signed-off-by: Khem Raj <raj.khem@gmail.com>
pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed
to miniuart-bt in 2014, now with 5.4 these are not recognised anymore
and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
- Refresh patches
- userland now needs to create symlinks for egl.pc,glesv2.pc and vg.pc
when vc4 is not used
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add u-boot-default-script to the PROVIDES variable to make easier to
replace boot script in another layer just by changing
PREFERRED_PROVIDER_u-boot-default-script variable. Set rpi-u-boot-scr as
the default provider for meta-raspberrypi.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Add instructions how to auto-load I2C kernel modules with
KERNEL_MODULE_AUTOLOAD when I2C is enabled.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
