functions/variables in this bbappend implemented for only raspberrypi3.
But these must be able to used to enabling bluetooth on another raspberrypi that has bluetooth feature such as raspberrypi0-wifi.
The simple solution is a duplicating these but it is not good ideas for maintainance.
Add functions/variables follows to simplify to enabling bluetooth on another raspberrypi that has bluetooth.
- BCM_BT_SOURCES
- enable_bcm_bluetooth()
- BCM_BT_FIRMWARE
- BCM_BT_SERVICE
Signed-off-by: Yusuke Mitsuki <mickey.happygolucky@gmail.com>
This patch adds the bluetooth support for the brcm43438 module on the raspberrypi3 by
deploying the modules firmware and changing the targeting firmware path. In addition
the brcm43438.service adds the automatically attaching (hciattach) for systemd environments.
The following steps can be used to manually configure the brcm43438:
root@raspberrypi3:~# hciattach /dev/ttyAMA0 bcm43xx-3wire
bcm43xx_init
Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Set Controller UART speed to 3000000 bit/s
Device setup complete
root@raspberrypi3:~# hciconfig
hci0: Type: BR/EDR Bus: UART
BD Address: B8:27:EB:6C:85:BE ACL MTU: 1021:8 SCO MTU: 64:1
DOWN
RX bytes:983 acl:0 sco:0 events:33 errors:0
TX bytes:887 acl:0 sco:0 commands:33 errors:0
root@raspberrypi3:~# /usr/lib/bluez5/bluetooth/bluetoothd -e -n -E
root@raspberrypi3:~# bluetoothctl
[NEW] Controller B8:27:EB:6C:85:BE raspberrypi3 [default]
[bluetooth]# power on
[CHG] Controller B8:27:EB:6C:85:BE Class: 0x400000
Changing power on succeeded
[CHG] Controller B8:27:EB:6C:85:BE Powered: yes
[bluetooth]# scan on
Discovery started
[CHG] Controller B8:27:EB:6C:85:BE Discovering: yes
[NEW] Device 00:1C:05:FF:F9:F8 Nonin3230_501585326
NOTE: SERIAL_CONSOLE must configured to ttyS0 instead of ttyAMA0 (used by the brcm43438). See pending patch from Martin Bergek
Signed-off-by: Tom Doehring <toolmmy@gmail.com>
