There is anoter hifiberry hat, for which there is currently
no overlay added to the build, so let's add it:
hifiberry-dacplusadcpro.dtbo
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Add overlays/vc4-kms-v3d-pi5.dtbo to use vc4-kms-v3d driver on
Raspberry Pi 5.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This fix is needed to bring the complete dependency chain in order to guarantee
the recursive runtime dependencies [1] of do_populate_lic_deploy in do_populate_lic
will run as expected.
[1] openembedded-core/meta/classes-recipe/license_image.bbclass:do_populate_lic_deploy[recrdeptask] += "do_populate_lic do_deploy"
Fix the following image build issues:
| ERROR: lmp-base-console-image-1.0-r0 do_populate_lic_deploy: Couldn't find license information for dependency rpi-config
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
wic images depend on the kernel device trees, and therefore should
depend on virtual/kernel:do_deploy to make sure these are present in the
deploy directory.
Most of the time, this dependency is satisfied indirectly since a rootfs
image will depend on the kernel, but add it explicitly for the cases
where it is not.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
It can be useful to disable the WiFi for hardening reasons.
And it probably lower the power consumption a bit.
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
This patch is based on an analog patch from Christopher Boyd <xpboyd@gmail.com> committed at meta-freescale.
(see 954d7a7d7a)
Signed-off-by: Oliver Lang <quantenkeks@gmail.com>
The kernel image deployment is now defined in IMAGE_BOOT_FILES as a
separate variable: RPI_EXTRA_IMAGE_BOOT_FILES. This allows a custom
kernel image deployment by redefining this variable when needed.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
All 32-bit machines are sharing the list of machine dtbs with the
exception of raspberrypi0-2w. Move this away too to unify the
machine configurations.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
Adds support for software i2c controller on gpio pins
RPI_EXTRA_CONFIG += "\
dtoverlay=i2c-gpio,bus=7,i2c_gpio_sda=6,i2c_gpio_scl=5 \
"
Will configure a /dev/i2c-7 bus with sda=gpio#6 and slc=gpio#5
The overlay documentation can be found here:
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README
Signed-off-by: Bernhard Guillon <Bernhard.Guillon@begu.org>
Since RPi kernel commit 9e87248154a633b18b4900ee742d9894b49e019b FKMS overlay
for Pi4 family is split into a separate file. Not shipping the overlay means
FKMS does not load correctly on these devices and VC4 is not brought up.
Signed-off-by: Michal Toman <michal@toman.sk>
- Feature is enabled with ENABLE_GPIO_SHUTDOWN variable
- Include the gpio-shutdown overlay
- If using SysV init include the additional keymap and inittab entries
to bind the KEY_POWER event
- Systemd init does not require any additional bindings
Signed-off-by: Otto Esko <otto.esko@gmail.com>
Some machines need to have the kernel toggle a gpio when an external
power source needs to shut off power to complete a shutdown and de-energize
the processor. gpio-poweroff provides this functionality but was omitted
from the kernel overlays brought oveer by the rpi-layer from the kernel.
Signed-off-by: Cameron Kellough <cameron@telemetrak.com>
This is the result of automated script conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
overlay_map.dtb arranges that when config.txt requests "vc4-kms-v3d"
the rpi4 will actually load "vc4-kms-v3d-pi4" and fixups like that.
It is present on the official distros, and must be put into the
overlays subdirectory in the boot partition.
For a detailed description of the overlay_map.dts file see:
https://www.raspberrypi.org/documentation/configuration/device-tree.md#part2.2.10
vc4-kms-v3d-pi4 is required for the arm based kms driver on the rpi4.
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
In theory, this would allow one to use the official 7-inch touchscreen
in combination with the (non-firmware) kms driver by adding the
following lines to config.txt:
ignore_lcd=1
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch
Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
To allow other layers to easily provide a default kernel preference to
use with the Raspberry Pi MACHINEs, switch to use the ??= assignment
operator for setting the default kernel and the device tree value in
this layer.
This change is motivated by enabling Xen support in meta-virtualization
to use the raspberrypi4-64 MACHINE definition from this layer with the
Yocto Linux kernels.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
The device tree only supports a single CAN interface. This prevents
compatiblity with dual-CAN boards like the PiCAN2 Duo.
The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
As per the example in the bsp-guide, and the qemu and other machine
configs. Assists when running virtualized, where serial console
device can differ.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
Add kernel modules gpio-ir and gpio-ir-tx to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1.
Variable ENABLE_IR enables infrared support (for LIRC). This
change affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to
support peripherals for sending and receiving infrared signals.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add kernel modules i2c-dev and i2c-bcm2708 to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1.
This affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add kernel modules, including i2c-dev and i2c-bcm2708, to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will
be present in all images based on packagegroup-core-boot,
including the core-image-minimal image.
Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS
they will be added only in images based on packagegroup-base,
which does not include the core-image-minimal or
core-image-full-cmdline images.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed
to miniuart-bt in 2014, now with 5.4 these are not recognised anymore
and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This change moves the default image for all rpi machines.
We moved from rpi-sdimg to wic.bz2.
Also enable wic.bmap image generation.
From the documentation in [1], Bmaptool is a generic tool
for creating the block map (bmap) for a file and copying
files using the block map. The idea is that large files,
like raw system image files, can be copied or flashed a
lot faster and more reliably with bmaptool than with
traditional tools, like "dd" or "cp".
Example:
$: sudo bmaptool copy <image-name>.wic.xz /dev/<your-block-device>
[1] - https://github.com/intel/bmap-tools
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
Since we enabled vc4graphics by default[1], there is no easy way to disable
it if needed. This patch introduces a variable (DISABLE_VC4GRAPHICS)
which when set to '1' will not add 'vc4graphics' to MACHINE_FEATURES
forcing the old behaviour.
One could use it in 'local.conf' for example.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Vc4graphics enables drm backend on wayland Compositor (weston & westeros)
Appending vc4graphics machine feature to use mesa drivers for OpenGL and
V4l2 for video.
Signed-off-by: Riyaz <Riyaz.l@ltts.com>
This change is following the rename in the kernel:
commit 6f91b5dbfdb62a434571a73f2dc15181963e3bea
Author: Phil Elwell <phil@raspberrypi.org>
Date: Tue May 28 16:36:04 2019 +0100
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
