There is anoter hifiberry hat, for which there is currently
no overlay added to the build, so let's add it:
hifiberry-dacplusadcpro.dtbo
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
"zImage" not supported on arm64 so set KERNEL_IMAGETYPE_DIRECT to
"Image" for Raspberry Pi 5 and avoid the following errors:
| make: *** No rule to make target 'zImage'. Stop.
| ERROR: oe_runmake failed
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Set SERIAL_CONSOLES to ttyAMA10. This fixes login on the UART
no matter if systemd is used.
This work was sponsored by GOVCERT.LU.
Suggested-by: Gael PORTAY <gael.portay@rtone.fr>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Set SDIMG_KERNELIMAGE to kernel_2712.img instead of kernel8.img.
Raspberry Pi 5 firmware defaults to loading kernel_2712.img because
this image contains optimisations specific to Raspberry Pi 5
(e.g. 16K page-size). For more details:
https://www.raspberrypi.com/documentation/computers/config_txt.html#kernel
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add overlays/vc4-kms-v3d-pi5.dtbo to use vc4-kms-v3d driver on
Raspberry Pi 5.
This work was sponsored by GOVCERT.LU.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This fix is needed to bring the complete dependency chain in order to guarantee
the recursive runtime dependencies [1] of do_populate_lic_deploy in do_populate_lic
will run as expected.
[1] openembedded-core/meta/classes-recipe/license_image.bbclass:do_populate_lic_deploy[recrdeptask] += "do_populate_lic do_deploy"
Fix the following image build issues:
| ERROR: lmp-base-console-image-1.0-r0 do_populate_lic_deploy: Couldn't find license information for dependency rpi-config
Signed-off-by: Jose Quaresma <jose.quaresma@foundries.io>
wic images depend on the kernel device trees, and therefore should
depend on virtual/kernel:do_deploy to make sure these are present in the
deploy directory.
Most of the time, this dependency is satisfied indirectly since a rootfs
image will depend on the kernel, but add it explicitly for the cases
where it is not.
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
It can be useful to disable the WiFi for hardening reasons.
And it probably lower the power consumption a bit.
Signed-off-by: Jan Vermaete <jan.vermaete@gmail.com>
Prepending new definitions should be preferred to assignment, as it is
simpler and more conducive to defining new machine configurations that
reuse these configurations.
Signed-off-by: Zachary T Welch <zach@aquabyte.ai>
ERROR: Multiple .bb files are due to be built which each provide
libav/libpostproc:
/../../meta-raspberrypi/recipes-multimedia/rpidistro-ffmpeg/rpidistro-ffmpeg_4.3.4.bb
/../../openembedded-core/meta/recipes-multimedia/ffmpeg/ffmpeg_5.1.2.bb
Ensures bitbake understands which recipe to select first.
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
* it matches the default from tune-cortexa72.inc:
$ grep DEFAULTTUNE openembedded-core/meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc
DEFAULTTUNE ?= "cortexa72"
* the assignment was introduced in:
cd234925fa
to switch to cortexa72-crc, but this change was effectively reverted in:
42ef0f5046
by setting it back to default "cortexa72".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This patch is based on an analog patch from Christopher Boyd <xpboyd@gmail.com> committed at meta-freescale.
(see 954d7a7d7a)
Signed-off-by: Oliver Lang <quantenkeks@gmail.com>
The new raspberrypi-armv8.conf aims at supporting all the ARMv8
Raspberry Pi boards.
This initial support was tested on:
* Raspberry Pi 4 Model B
* Raspberry Pi 3 Model B
* Raspberry Pi 0 2 WiFi
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
The new raspberrypi-armv7.conf aims at supporting all the ARMv7
Raspberry Pi boards.
This initial support was tested on:
* Raspberry Pi 4 Model B
* Raspberry Pi 3 Model B
* Raspberry Pi 0 2 WiFi
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
The kernel image deployment is now defined in IMAGE_BOOT_FILES as a
separate variable: RPI_EXTRA_IMAGE_BOOT_FILES. This allows a custom
kernel image deployment by redefining this variable when needed.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
All 32-bit machines are sharing the list of machine dtbs with the
exception of raspberrypi0-2w. Move this away too to unify the
machine configurations.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
Adds ability to select rpidistro version of vlc and ffmpeg over oe-core version.
via the PREFERRED_PROVIDER_vlc & PREFERRED_PROVIDER_ffmpeg
variables.
Signed-off-by: Vincent Davis Jr <vince@underview.tech>
Adds support for software i2c controller on gpio pins
RPI_EXTRA_CONFIG += "\
dtoverlay=i2c-gpio,bus=7,i2c_gpio_sda=6,i2c_gpio_scl=5 \
"
Will configure a /dev/i2c-7 bus with sda=gpio#6 and slc=gpio#5
The overlay documentation can be found here:
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README
Signed-off-by: Bernhard Guillon <Bernhard.Guillon@begu.org>
Since RPi kernel commit 9e87248154a633b18b4900ee742d9894b49e019b FKMS overlay
for Pi4 family is split into a separate file. Not shipping the overlay means
FKMS does not load correctly on these devices and VC4 is not brought up.
Signed-off-by: Michal Toman <michal@toman.sk>
After commits ca50267ab568 & 03cebdd7ef92 in openembedded-core, the
`cortexa72-crc` tune is no longer available and the `cortexa72` tune
includes the crc extension by default. Update the raspberrypi4-64
machine config to handle these changes.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
- Feature is enabled with ENABLE_GPIO_SHUTDOWN variable
- Include the gpio-shutdown overlay
- If using SysV init include the additional keymap and inittab entries
to bind the KEY_POWER event
- Systemd init does not require any additional bindings
Signed-off-by: Otto Esko <otto.esko@gmail.com>
Some machines need to have the kernel toggle a gpio when an external
power source needs to shut off power to complete a shutdown and de-energize
the processor. gpio-poweroff provides this functionality but was omitted
from the kernel overlays brought oveer by the rpi-layer from the kernel.
Signed-off-by: Cameron Kellough <cameron@telemetrak.com>
With latest 5.10 kernel fkms version fails to bring up VC4 and we do not
get dri device initialized ( /dev/dri ) is empty, which means we can not
launch wayland componsitors.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is the result of automated script conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
