It doesn't make sense to install to ${libexecdir}/rpi-mkimage as it
changes the path on fido and earlier branches from:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage
to:
[...]/sysroots/x86_64-linux/usr/lib/rpi-mkimage/rpi-mkimage
Using ${libexecdir} instead of ${libexecdir}/rpi-mkimage preserves
the path for fido and earlier.
Signed-off-by: Jonathan Liu <net147@gmail.com>
The rpi-mkimage tools are installed ${libexecdir}/rpi-mkimage within
native sysroot, where ${libexecdir} resolves to /usr/libexec. This caused
the build to fail due to recipe trying to access ${libdir}/mkimage. Fix
the paths to use an unambiguous STAGING_LIBEXECDIR_NATIVE so that a
proper location is used.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
The rpi-mkimage tools are installed ${libexecdir}/rpi-mkimage within
native sysroot, where ${libexecdir} resolves to /usr/libexec. This caused
the build to fail due to recipe trying to access ${libdir}/mkimage. Fix
the paths to use an unambiguous STAGING_LIBEXECDIR_NATIVE so that a
proper location is used.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
For consistency with other recipes that look for mkimage
tools (u-boot-rpi, linux-raspberrypi) under ${libexecdir}/rpi-mkimage,
make sure that the tools are installed at the proper location.
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
RTIMULib is a C++ and Python library that makes it easy to use
9-dof and 10-dof IMUs with embedded Linux systems. Python
module for Raspberry Pi Sense HAT depends on it.
Python module python-rtimu uses the source code from the
GitHub repository of RPi-Distro.
Signed-off-by: Leon Anavi <leon@anavi.org>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Python module to control the Raspberry Pi Sense HAT used in
the Astro Pi mission. This recipe provides the officially
supported library for the Sense HAT with access to all of the
on-board sensors and the LED matrix.
Signed-off-by: Leon Anavi <leon@anavi.org>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
This file has been wrongly introduced in commit 72ea51f.
Gianfranco Costamagna <costamagnagianfranco@yahoo.it>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
With the newer kernels that use device tree, the SPI bus is only
enabled by a device tree setting. This is now supported by adding
ENABLE_SPI_BUS = "1"
in local.conf
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
The update of the kernel in 10a5bace87 to
3.18.16 missed the separate rtc overlays being replaced by the i2c-rtc
overlay.
Signed-off-by: Jonathan Liu <net147@gmail.com>
vcos headers include headers like "vcos_platform.h" "vcos_futex_mutex.h"
"vcos_platform_types.h" and these headers are different based on
platform/OSes. e.g. OS targets that support pthreads these headers
should come from pthreads/ folder but not for others. So one would add
right -I option for every package that accesses them directly or
indirectly. so if a software does #include <EGL/egl.h> then it will
break
| In file included from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos_assert.h:149:0,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos.h:114,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vmcs_host/vc_dispmanx.h:33,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/EGL/eglplatform.h:110,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/EGL/egl.h:36,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/../shared/platform.h:29,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/window.h:33,
| from
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/weston/1.8.0-r0/weston-1.8.0/clients/eventdemo.c:40:
|
/mnt/home/kraj/work/angstrom/build/tmp-angstrom-glibc/sysroots/raspberrypi2/usr/include/interface/vcos/vcos_types.h:38:33:
fatal error: vcos_platform_types.h: No such file or directory
| #include "vcos_platform_types.h"
| ^
| compilation terminated.
This is wrong, it should not happen since doing simple #include
<EGL/egl.h> should not demand manual addition of some internal paths
tobe added to -I flags.
This patch fixes the headers which refer to headers inside pthreads/
folder to prefix them with pthreads/ so we dont have to specify
additional paths
This fixes weston on rpi and I believe there are more patches now to
recipes-multimedia/gstreamer/gstreamer1.0-plugins-bad_%.bbappend
recipes-multimedia/omxplayer/omxplayer_git.bb
which can be removed as well
Signed-off-by: Khem Raj <raj.khem@gmail.com>
several userspace libraries like libepoxy poke for pkgconfigs ( .pc )
files to detect egl support, and comes out to fail in configure stage,
one of the patches now adds support to generate .pc files for some known
cases. it could be further extended if needed for other libraries too
Secondly, the default CMAKE_INSTALL_PREFIX is /opt/vc but in OE we use
proper /usr so lets make this change as well, it simplifies do_install()
.so are not versioned so we need to grapple with OE's defaults of
expecting versioned .so files.
Adjust packages for -dev package such that it can automatically package
pkgconfig files and inherit pkgconfig because in cmake code we are not
looking for pkgconfig so we need the dependency also put in place for
consistent builds
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This requires some changes to KERNEL_DEVICETREE as the dtb
layout has changed to support overlays. This change also
makes us ready to support kernel 4.x series
Signed-off-by: Alex J Lennon <ajlennon@dynamicdevices.co.uk>
The patch was rebased to apply on the updated version.
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Building userland source with gcc 5.x causes multiple issues such as:
vcos_thread.h:186:15: warning: inline function 'vcos_thread_get_affinity' declared but never defined
| VCOS_UNSIGNED vcos_thread_get_affinity(VCOS_THREAD_T *thread);
The following patches fixes these issues and allows building userland on the current
poky master branch.
Signed-off-by: Tom Doehring <toolmmy@googlemail.com>
Update to latest revision in order to get rid of the integration patch
'0001-handle-install-data-hook-when-cross-compile.patch' that has been
submitted upstream.
Changes since cd318cd63031a30249a4c08435b97263fa76d7b7:
bce7c1b Merge pull request #45 from Technux/dev/technux
74510ff Display an error message if unable to open mbox
53197ca handle install-data-hook when cross compile
Signed-off-by: Petter Mabäcker <petter@technux.se>
Current instructions could be improvised to help user in creating
properly formatted patches with some command help on git format-patch
and git send-email
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The kernel debugger over console (kgdboc) parameter is being added
unconditionally to the kernel command line but this means that the
kernel will stop and wait for gdb to attach in case of a exception
or when sending a sysrq-g key. This behaviour may not be what most
users wants that are not remotely debugging the kernel over serial
console so make it optional by adding a ENABLE_KGDB config option.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
[javier: Extended commit message and made it conditional]
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
The boot partition currently has a size of 20 MiB but just the start elf
binaries account almost 12 MiB, which means that only 8 MiB is left for
the kernel image. A recent kernel with many of its options built-in can
easily be more than 4 MiB so let's double the boot partition size to 40
MiB to make sure that it has enough room for the kernel image, the DTBs
and possible even a backup kernel.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
[javier: Extended the commit message]
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Recent updates to the MSDOS tools (OE-core is now at 3.0.28) have made
it an error to overwrite an image using mkfs.vfat. This patch fixes
that problem by removing any old/stale images, thus starting from scratch.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
We have errors like below with glibc 2.22+
net_sockets_common.c:139:20: error: storage size of 'hints' isn't known
struct addrinfo hints, *info, *p;
^
newer glibc has now fixed the definitions of getaddrinfo and ilk to be
enabled with correct posix version.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
