* use INITRAMFS_SYMLINK_NAME from new kernel-artifact-names.bbclass
instead of KERNEL_INITRAMFS
* the documentation says that KERNEL_INITRAMFS should be used to
define extension of initramfs, but in linux-raspberrypi.inc it's
defined only to 1 or empty based on INITRAMFS_IMAGE_BUNDLE variable
and I don't see any code in meta-raspberry or oe-core which would
use KERNEL_INITRAMFS to actualy name the initramfs artifact to create:
${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin
used in classes/sdcard_image-rpi.bbclass
* also fix the assumption that there is -${MACHINE} suffix in:
${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}${KERNEL_INITRAMFS}-${MACHINE}.bin
because that's defined as KERNEL_IMAGE_SYMLINK_NAME and some DISTROs
might use different value
* this depends on oe-core changes which were merged today:
http://git.openembedded.org/openembedded-core/commit/?id=7d0ef0eaa1bfe97015a774c26f5791622e7e8b12
* this is the last piece of previous pull-request:
https://github.com/agherzan/meta-raspberrypi/pull/159
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* there is runtime dependency on rpi-u-boot-scr from u-boot itself:
recipes-bsp/u-boot/u-boot_%.bbappend:RDEPENDS_${PN}_append_rpi = " rpi-u-boot-scr"
* but that's not enough to ensure that rpi-u-boot-scr:do_deploy is
finished before do_image_rpi_sdimg and for
${DEPLOY_DIR_IMAGE}/boot.scr to exist in time
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* instead of using ${KERNEL_IMAGETYPE}-${DTB_BASE_NAME}.dtb use
the entries from KERNEL_DEVICETREE
* basename is still needed because raspberrypi3-64 is using:
broadcom/bcm2710-rpi-3-b.dtb and the ${DEPLOY_DIR_IMAGE} doesn't
contain any directories for DTBs and we cannot remove broadcom/
prefix, because then "make bcm2710-rpi-3-b.dtb" from
kernel-devicetree.bbclass will fail with:
make[3]: *** No rule to make target 'arch/arm64/boot/dts/bcm2710-rpi-3-b.dtb'. Stop.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The patch introduced in 237e0c7 is now fixed upstream in gstreamer-base-1.14.1, hence drop it.
See: <2f3ff84f40>
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
The patch in 237e0c7 used a define guard that clashes with an actual feature of Khronos (EGL_KHR_stream).
This makes some packages such as `qtbase` to think that the outdated Krhonos in userland has newer features.
This fix uses a more specific name for the relevant define guard (EGL_KHR_uint64_typedef).
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
The `gstreamer1.0-plugins-base` package version `1.14` uses `EGL_EXT_image_dma_buf_import`, which
expects the `EGLuint64KHR` typedef that is present in recent versions of Khronos.
However, the older version included in userland does not provide it.
This patch backports the missing typedef from recent Khronos into userland.
See: <https://www.khronos.org/registry/EGL/api/EGL/eglext.h>
Submitted to userland in <https://github.com/raspberrypi/userland/pull/467>
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
1.14 does not support this option
Fixes
QA Issue: gstreamer1.0-plugins-bad: configure was passed unrecognised options: --disable-dispmanx [unknown-configure-option]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
The attempt to Raspbian updated firmware blobs in packages separate from
linux-firmware introduced unresolvable conflicts with the standard
linux-firmware roll-up package. Revert to using an augmented
linux-firmware recipe that overrides and adds firmware from two Raspbian
repositories that have up-to-date images.
Closes#244
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Wayland was updated recently in Poky, and now includes `libwayland-egl`:
commit 8097bf7012a0d97d3b8b48eceb5dc20cc4ae7ca9
Author: Denys Dmytriyenko <denys@ti.com>
Date: Tue Apr 10 15:06:09 2018 -0400
wayland: upgrade to 1.15.0
Official announcement:
https://lists.freedesktop.org/archives/wayland-devel/2018-April/037767.html
| libwayland-egl is now part of libwayland, and will presumably be removed
| from mesa in the not too distant future.
Update mesa recipe by removing corresponding libwayland-egl entries.
(From OE-Core rev: 6e5952fcfc13ff4b63c9376bd41a1dbba957f425)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
However, the `userland` ships its own version of the library (see issue #243).
Until further testing, for now discard the version in `wayland` in favour of the version in `userland`.
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
Unique bluetooth device addresses are not assigned correctly with some
firmware, resulting in a fixed default address. Use the same utility as
raspbian does to initialize the device.
Closes#236
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Remove the material covered by the Cypress license from the bluez5
package and move it to its own package, derived directly from the
upstream sources.
Closes#224
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Type=simple is wrong: it allows bluetooth.service to start before the
uart is configured, resulting in hci0 command tx timeout errors.
Type=oneshot blocks follow-up units until the ExecStart completes.
Add RemainAfterExit since system state has changed as a result of the
unit.
Also add a BindsTo for the device that we're going to use.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
[Issue #239] -- https://github.com/agherzan/meta-raspberrypi/issues/239
The patch 0002-rpi_0_w-Add-configs-consistent-with-RpI3.patch has been
applied to the upstream U-Boot repo and is now in the release that
openembedded-core uses so remove it from meta-raspberrypi's U-Boot
bbappend.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There's no reason to support the old, outdated ARM OABI when upstream
linux-raspberrypi doesn't support this by default.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
CONFIG_BLK_DEV_DRBD: Deciding whether to use the in-kernel DRBD module or the
external drbd recipe in meta-networking is a policy decision and doesn't belong
in our BSP layer.
CONFIG_LEGACY_PTYS: These are legacy for a reason. They're not enabled in the
defconfig so they shouldn't be required for rpi devices. Let's drop this here,
it can be added back in a distro layer where (if) needed.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This is obsolete, undocumented and won't work anyway since we force the kernel
command line to ${CMDLINE} via the cmdline.txt file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
KERNEL_ENABLE_CGROUPS: This is obsolete, all required config options for cgroups
are enabled by default.
KERNEL_INITRAMFS: Some of the config options we set are already enabled by
default.
UDEV_GE_141: This is long obsolete and all the required config options are
already set in the defconfig.
ARM_KEEP_OABI: AEABI=y and OABI_COMPAT=n are already set in the defconfig.
CONFIG_LOCALVERSION_AUTO: This setting is already disabled in the defconfig.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
