Kernel 4.19.y and above was patched to rename the Raspberry Pi Zero W dts.
Unfortunately, this modification was not propagated to previous kernels,
especially on the 4.14.y series which is still supported in this layer.
Thus, kernel 4.14.y would not build because correct .dts file is not found.
The aforementioned modification was merged as backport back in 4.14.y series.
Updating to the latest commit fixes the issue.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
The PCIe bounce buffers were ported[1] in the kernel so we can remove
this limitation now.
[1] https://github.com/raspberrypi/linux/pull/3144
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Videocore 5/6 support was added as a separate driver in mesa: v3d. Enable
this so we can have it available for Raspberry Pi 4. Also, this driver
depends on kmsro.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Bump revision to fix playback errors on RPi 4 (https://github.com/popcornmix/omxplayer/issues/733)
and update patches accordingly.
Update the license hash because of the change in FSF mailing address.
Signed-off-by: Kirill Goncharov <kdgoncharov@gmail.com>
* I have this in our layer for some time:
RPI_KERNEL_DEVICETREE_OVERLAYS_append = " overlays/vc4-fkms-v3d.dtbo"
because we're using vc4graphics also on raspberrypi3 and it was
working fine until recently.
* now the default rpi-base.inc in warrior and master branch includes the same since:
37aa050d5a
and do_image_rpi_sdimg started failing with a bit useless log:
...
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 4194kB 46.1MB 41.9MB primary boot, lba
2 46.1MB 1145MB 1099MB primary
mkfs.fat: warning - lowercase labels might not work properly with DOS or
Windows
mkfs.fat 4.1 (2017-01-24)
WARNING: exit code 1 from a shell command.
* after adding -v to mcopy calls I got slightly better log:
...
Copying w1-gpio-pullup.dtbo
Copying w1-gpio.dtbo
WARNING: exit code 1 from a shell command.
* the issue is that mcopy behavior in non-interactive shell is to fail
when the target file already exists (sometimes it seems to cause mcopy
to hang forever), but when you execute the run.do_image_rpi_sdimg
script manually in interactive shell it will nicely show this prompt
on stderr:
$ dtb=vc4-fkms-v3d.dtbo recipe-sysroot-native/usr/bin/mcopy -i boot.img -s BUILD/deploy/images/raspberrypi3/$dtb ::overlays/$dtb
Long file name "vc4-fkms-v3d.dtbo" already exists.
a)utorename A)utorename-all r)ename R)ename-all o)verwrite O)verwrite-all
s)kip S)kip-all q)uit (aArRoOsSq): o
* with the bbfatal the log is finally a bit more useful:
...
Copying w1-gpio-pullup.dtbo
Copying w1-gpio.dtbo
ERROR: mcopy cannot copy TOPDIR/BUILD/deploy/images/raspberrypi3/vc4-fkms-v3d.dtbo into boot.img
WARNING: exit code 1 from a shell command.
* the only exception is FATPAYLOAD where it was ignoring mcopy with || true
before, I've added bbwarn, because even issues like mentioned there
"vfat issues like not supporting .~lock files" are probably worth
reporting as warning (why would people add .~lock to FATPAYLOAD if
it cannot be copied into boot.img)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
There is no need to override complete packageconfig but just the openGL
part, this ensures that any common change in oe-core reflects for rpi as
well and does not cause the packageconfigs to go stale
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Its enabled in linux-raspberrypi modules in defconfig
so we can ignore external driver for now, fixes
ERROR: linux-raspberrypi-1_4.19.58+gitAUTOINC+d5dc848c98-r0 do_packagedata_setscene: The recipe linux-raspberrypi is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
/mnt/a/yoe/build/tmp/pkgdata/raspberrypi3-64/runtime/kernel-module-drbd-4.19.58.packaged
(matched in manifest-raspberrypi3_64-drbd.packagedata)
/mnt/a/yoe/build/tmp/pkgdata/raspberrypi3-64/runtime/kernel-module-drbd-4.19.58
(matched in manifest-raspberrypi3_64-drbd.packagedata)
Please verify which recipe should provide the above files.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This is no longer needed, on the contrary is fails the build for
webkitgtk
Fixes
webkitgtk-2.24.2/Source/WebCore/platform/graphics/gstreamer/MediaPlayerPrivateGStreamerBase.cpp:1007:33: error: use of undeclared identifier 'TEXTURE_MAPPER_COLOR_CONVERT_FLAG'
| m_textureMapperFlags |= TEXTURE_MAPPER_COLOR_CONVERT_FLAG;
| ^
Signed-off-by: Khem Raj <raj.khem@gmail.com>
After a review in upstream, some of the patches were modified. Most
notable changes:
1. use directly the dtb passed by the firmware and make sure uboot
doesn't tweak memory/reg
2. remove known unimplemented support (usb, eth etc.)
3. drop patches that are not needed anymore with the new firmware update
(for example 0012-bcm283x-mbox-Correctly-wait-for-space-to-send.patch)
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Vc4graphics enables drm backend on wayland Compositor (weston & westeros)
Appending vc4graphics machine feature to use mesa drivers for OpenGL and
V4l2 for video.
Signed-off-by: Riyaz <Riyaz.l@ltts.com>
The upstream branch might suffer rebases due to effort of pushing the
patches upstream. To avoid issues, let's have here the patches we need
for RPi 4 support.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
When we read the docs, we have the feelings that theses variables are
boolean ones. So I was setting, for example in my distro.conf file the
variable ' ENABLE_I2C = "1" ' to enable I2C. Then I wanted to disable it
by simply setting 'ENABLE_I2C' to "0" but it wasn't working. So I
noticed that, for example, ' ENABLE_UART ' was checked with ' = "1" '
condition and some other "boolean" was checked against ' -n ' like for
ENABLE_I2C.
This commit tries to have an uniform behavior for all variables that are
shown in the doc under the format ' VARIABLE = "1" ' to enable them and
the reader can think they are kind of 'boolean' values.
Signed-off-by: Joël Carron <joel.carron@eeproperty.ch>
We already do this for rpi3-64 and we will need it for rpi4-64 as well.
See 6c4de0b5fe for more details.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Fixes vc4 graphics issues seen with 4.19.56
Add -@ to device tree flags so we can debug/dump the
dtb with symbols, helps in debugging the overlays
Signed-off-by: Khem Raj <raj.khem@gmail.com>
