Contains the following changes:
7f9c648dad64 drm/vc4: Move IRQ enable to PM path
which fixes an unbalanced IRQ enable warning, which was rapported
in #286
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
Signed-off-by: Gunnar Andersson <gandersson@genivi.org>
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The attempt to Raspbian updated firmware blobs in packages separate from
linux-firmware introduced unresolvable conflicts with the standard
linux-firmware roll-up package. Revert to using an augmented
linux-firmware recipe that overrides and adds firmware from two Raspbian
repositories that have up-to-date images.
Closes#244
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Unique bluetooth device addresses are not assigned correctly with some
firmware, resulting in a fixed default address. Use the same utility as
raspbian does to initialize the device.
Closes#236
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Remove the material covered by the Cypress license from the bluez5
package and move it to its own package, derived directly from the
upstream sources.
Closes#224
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Type=simple is wrong: it allows bluetooth.service to start before the
uart is configured, resulting in hci0 command tx timeout errors.
Type=oneshot blocks follow-up units until the ExecStart completes.
Add RemainAfterExit since system state has changed as a result of the
unit.
Also add a BindsTo for the device that we're going to use.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
There's no reason to support the old, outdated ARM OABI when upstream
linux-raspberrypi doesn't support this by default.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
CONFIG_BLK_DEV_DRBD: Deciding whether to use the in-kernel DRBD module or the
external drbd recipe in meta-networking is a policy decision and doesn't belong
in our BSP layer.
CONFIG_LEGACY_PTYS: These are legacy for a reason. They're not enabled in the
defconfig so they shouldn't be required for rpi devices. Let's drop this here,
it can be added back in a distro layer where (if) needed.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
This is obsolete, undocumented and won't work anyway since we force the kernel
command line to ${CMDLINE} via the cmdline.txt file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
KERNEL_ENABLE_CGROUPS: This is obsolete, all required config options for cgroups
are enabled by default.
KERNEL_INITRAMFS: Some of the config options we set are already enabled by
default.
UDEV_GE_141: This is long obsolete and all the required config options are
already set in the defconfig.
ARM_KEEP_OABI: AEABI=y and OABI_COMPAT=n are already set in the defconfig.
CONFIG_LOCALVERSION_AUTO: This setting is already disabled in the defconfig.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
From patch message:
In some cross build environments such as the Yocto Project build environment
it provides an ncurses library that is compiled differently than the host's
version. This causes display corruption problems when the host's curses
includes are used instead of the includes from the provided compiler are
overridden. There is a second case where there is no curses libraries at
all on the host system and menuconfig will just fail entirely.
The solution is simply to allow an override variable in check-lxdialog.sh
for environments such as the Yocto Project. Adding a CROSS_CURSES_LIB and
CROSS_CURSES_INC solves the issue and allowing compiling and linking against
the right headers and libraries.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Added support for and documented the following new extra build options:
* gpu_freq overclocking option
* disable boot rainbow splash screen
* configure the boot delay after GPU firmware loading
* configure common HDMI and composite video options
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
Updated BCM43430A1.hcd to bluez-firmware_1.2-3+rpt4.1.debian.tar.xz
Added BCM4345C0.hcd for RasperryPi 3B+ support
Files from https://github.com/RPi-Distro/bluez-firmware at commit
50fa5628b5c2fd6c59090fb18f02af9fd98c3170
Closes Issue #222
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If I am not mistaken, many desktops (kde/lxqt/xfce..) use udisks2 to ask for
devices which can be mounted. Without this patch the initial boot partition
can be mounted by a single click on folder displayed on desktop or file manager.
Why it is suggested to add this recipe to an image:
* It removes annoying icon in desktop/file manager.
* The initial boot partition is vfat. Unpriviledged users can modify
content. E.g by removing files accidently, images can be turned into
non-booting condition easily. And from security point of view, it is a
disaster.
FWIW: Have similar in all my BSPs vor very long time.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
Currently oe-core enables dri3 only for x11 AND vulcan. Although patch enabling
dri3 by default in oe-core was sent out, make sure here dri3 is enabled -
whatever oe-core suggest in the future.
Signed-off-by: Andreas Müller <schnitzeltony@gmail.com>
This packages only the firmware needed for the RaspberryPi boards. We use the
RPi-Distro as it's already maintained by the Raspbian guys and we get better
support for the RaspberryPi needed firmwares.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
fixes:
WARNING: gstreamer1.0-omx-1.12.4-r0 do_patch:
Some of the context lines in patches were ignored. This can lead to incorrectly applied patches.
The context lines in the patches can be updated with devtool:
devtool modify <recipe>
devtool finish --force-patch-refresh <recipe> <layer_path>
Then the updated patches and the source tree (in devtool's workspace)
should be reviewed to make sure the patches apply in the correct place
and don't introduce duplicate lines (which can, and does happen
when some of the context is ignored). Further information:
http://lists.openembedded.org/pipermail/openembedded-core/2018-March/148675.htmlhttps://bugzilla.yoctoproject.org/show_bug.cgi?id=10450
Details:
Applying patch 0001-config-files-path.patch
patching file config/bellagio/gstomx.conf
Hunk #1 succeeded at 1 with fuzz 2.
Hunk #2 succeeded at 9 with fuzz 2.
patching file config/rpi/gstomx.conf
Hunk #8 succeeded at 63 with fuzz 2.
Hunk #10 succeeded at 82 with fuzz 2.
Hunk #11 succeeded at 92 with fuzz 2.
Now at patch 0001-config-files-path.patch
deleted obsolete `gstreamer1.0-omx` directory with duplicated patches that are also in `gstreamer1.0-omx-1.12`.
made file naming for `gstreamer1.0-omx_%.bbappend` consistent with the rest of the layer recipes.
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
These renames are recently added
dd98890106
Some packages e.g. libSDL2 has started using the new names
and are resulting in undefined symbols e.g.
| /mnt/a/oe/build/tmp/work/cortexa7t2hf-neon-vfpv4-bec-linux-gnueabi/libsdl2-mixer/2.0.2-r0/recipe-sysroot/usr/lib/libb
rcmEGL.so: undefined reference to `wl_resource_post_error'
Signed-off-by: Khem Raj <raj.khem@gmail.com>
