Currently, we use vc4-kms-v3d as the default overlay for VC4 but this
seems to break vc4 at runtime on RPi4. Change this to vc4-fkms-v3d for
now as this is the default Raspbian ons as well.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
This change is following the rename in the kernel:
commit 6f91b5dbfdb62a434571a73f2dc15181963e3bea
Author: Phil Elwell <phil@raspberrypi.org>
Date: Tue May 28 16:36:04 2019 +0100
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
As well, define the correct configuration for this machine.
Tested this with and without u-boot on CM3 (with internal storage) and
CM3+ without internal storage.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
rpi3 is based on cortex-a53 implementation which is armv8+crc+simd
now that OE-Core has the appropriate tunes, switch to using the new
tune file, bonus, is that chromium will be more optimized now
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Raspberry Pi hardware requires firmware that supersedes or is not
present in the standard linux-firmware distribution. These files are
maintained in the RPi-Distro project on github.
Several attempts have been made to reconcile conflicts between what's in
linux-firmware and what the hardware needs. The existing approach is
functional but not maintainable since it combines material from three
repositories into a single package that claims to be linux-firmware.
Remove the appends that change the content of linux-firmware for rpi
hardware. Add two new recipes that follow the RPi-Distro repositories:
* firmware-nonfree which forked from linux-firmware and replaces
content is provided as linux-firmware-rpidistro;
* bluez-firmware which forked from (very old) bluez and adds content is
provided as bluez-firmware-rpidistro.
The packages are named to make clear that these come from RPi-Distro,
rather than generic sources. Licensing attempts to record the state of
licensing as documented in RPi-Distro.
Resolves: #298
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
From the documentation:
SERIAL_CONSOLES - Provide a value that specifies the baud rate followed by
the TTY device name separated by a semicolon. Use spaces to separate
multiple devices
Fixes build error of `systemd-serialgetty` after recent commit 8218bec.
See: <https://www.yoctoproject.org/docs/current/ref-manual/ref-manual.html#var-SERIAL_CONSOLES>
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
This is helpful for example in the cases where the kernel doesn't
provide all the dtbs in arm64 as in arm.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
[Issue #285] -- https://github.com/agherzan/meta-raspberrypi/issues/285
The openembedded-core commit 1860d9d3c62e2e94cd68a809385873ffd8270b6d
changed the names of DTB files in the deploy directory - they are no
longer prefixed with "${KERNEL_IMAGETYPE}-". Update make_dtb_boot_files
(which generates entries in IMAGE_BOOT_FILES) to take this change into
account.
Signed-off-by: Jonathan Haigh <jonathan.haigh@arm.com>
The attempt to Raspbian updated firmware blobs in packages separate from
linux-firmware introduced unresolvable conflicts with the standard
linux-firmware roll-up package. Revert to using an augmented
linux-firmware recipe that overrides and adds firmware from two Raspbian
repositories that have up-to-date images.
Closes#244
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
While wic is not a standard image, adding it to IMAGE_FSTYPES in
local.conf will fail unless a WKS_FILE is provided.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The dependency resolution code in bitbake has recently been optimized and this
seems to have slightly changed the behaviour of do_image_rpi_sdimg and
do_image_wic. We ensure that the main build artifacts are present by depending
on the relevant do_deploy and do_populate_sysroot tasks. However, we need to
ensure that other build tasks for these dependencies have also been executed
before we try to create our image. This can be achieved by adding a recursive
dependency on do_build, so that the do_build tasks of all recipes in the
dependency chain of do_image_rpi_sdimg/do_image_wic are executed before the
image function itself is executed.
The original issue seen here was that 'recipedata' files were not copied to
'tmp/deploy/licenses' as do_populate_lic for each dependency had not been ran
before the image creation function. The write_deploy_manifest function from
license.bbclass (listed in IMAGE_POSTPROCESS_COMMAND) therefore failed. Adding
the recursive dependency on do_build fixes this issue, ensuring do_populate_lic
runs before do_image_rpi_sdimg/do_image_wic.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The kernel class is now using $KERNEL_PACKAGE_NAME to set the default
kernel package name in order to allow alternate kernel flavors.
This fixes the following bitbake warning:
Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
* KERNEL_DEFCONFIG variable isn't used anywhere since this commit:
88478c3874
* it was replaced with KBUILD_DEFCONFIG:
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
We can't just override KERNEL_IMAGETYPE in machine-specific conf files without
breaking the implementation of RPI_USE_U_BOOT. Instead we need to define a new
KERNEL_IMAGETYPE_DIRECT variable which will control the value when u-boot is not
in use. This new variable may then be overridden as needed without breaking our
u-boot support.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Fixes: 50fd319205 for raspberrypi3-64.
Fixes: #153
For raspberrypi3-64 set default kernel image to "Image".
"zImage" are not supported by arm64 platforms. And ".gz" images are not
handled by bootloader yet.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
