www.raspberrypi.com restructured its documentation. Reflect the new
links in our docs.
Fixes#954
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
make_dtb_boot_files already creates the list of device trees with their
right destination. There is no need to redo a similar logic here. As a
matter of fact, the sdimg functionality had a bug because it didn't
treat overlay_map.dtb as an overlays file.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
This helps to avoid unstable GitHub archives. It also silences the
associated build warning:
WARNING: rpi-bootfiles-20211007-r3 do_unpack: QA Issue: rpi-bootfiles:
SRC_URI uses unstable GitHub/GitLab archives, convert recipe to use git
protocol [src-uri-bad]
Fixes#1002
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
* openembedded-core/scripts/contrib/convert-spdx-licenses.py .
...
All files processed with version 0.01
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* openembedded-core/scripts/contrib/convert-variable-renames.py .
...
All files processed with version 0.1
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* libmms was removed with 1.20.0 upgrade in:
https://git.openembedded.org/openembedded-core/commit/?id=76433d3628cbad311b428a57b25b4e2701ee513b
* fixes:
ERROR: gstreamer1.0-plugins-bad-1.20.0-r0 do_configure: QA Issue: gstreamer1.0-plugins-bad: invalid PACKAGECONFIG: libmms [invalid-packageconfig]
* faad now requires gpl to be enabled:
| ../gst-plugins-bad-1.20.0/ext/faad/meson.build:1:0: ERROR: Feature faad cannot be enabled:
| Plugin faad explicitly required via options but GPL-licensed plugins disabled via options.
| Pass option -Dgpl=enabled to Meson to allow GPL-licensed plugins to be built.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
it provides prebuilts which are linked against glibc. so disable it for
musl
Fixes
microcontroller/bcm283x/pulseio/libgpiod_pulsein contained in package python3-adafruit-blinka requires libc.so.6(GLIBC_2.4), but no providers found in RDEPENDS:python3-adafruit-blinka? [file-rdeps]
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Adds support for software i2c controller on gpio pins
RPI_EXTRA_CONFIG += "\
dtoverlay=i2c-gpio,bus=7,i2c_gpio_sda=6,i2c_gpio_scl=5 \
"
Will configure a /dev/i2c-7 bus with sda=gpio#6 and slc=gpio#5
The overlay documentation can be found here:
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README
Signed-off-by: Bernhard Guillon <Bernhard.Guillon@begu.org>
Since RPi kernel commit 9e87248154a633b18b4900ee742d9894b49e019b FKMS overlay
for Pi4 family is split into a separate file. Not shipping the overlay means
FKMS does not load correctly on these devices and VC4 is not brought up.
Signed-off-by: Michal Toman <michal@toman.sk>
We include a workflow for checking yocto compliance using the poky
provided script and also a matrix workflow for building the CI supported
build configurations.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
It includes jobs for checking DCO and reuse. The latter is set to allow
fails as the repository is not yet reuse compliant. When that is done,
we can switch it.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
It provides support for building a locally defined image. It also
includes a retry logic to handle eventual concurrent cleanups on the
runner.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
The dependencies to the meta-openembedded layers are handled through
dynamic layers so there is no need to advertise this in the
documentation. Especially that the layer configuration doesn't set that
either.
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
python3-adafruit-blinka depends on libgpiod which is provided by
meta-oe. To avoid this dependency at all times, we move the recipe under
the dynamic structure (along with the ones depending on it).
Signed-off-by: Andrei Gherzan <andrei.gherzan@huawei.com>
These recipes use prebuilt vc libs which are 32bit only libs
They also do not work on musl
https://github.com/agherzan/meta-raspberrypi/pull/983 introduced these
recipes however these are not generic packages that can be used on non-rpi machines
therefore mark them so. It helps in using this SOC layer with other SOC
layers in a distro
Signed-off-by: Khem Raj <raj.khem@gmail.com>
python3-picamera : recipe for python picamera library.
picamera-libs : recipe raspberry pi firmware which are required
by picamera.
Closes: #959
Signed-off-by: Bhargav Das <bhargavthriler@gmail.com>
After commits ca50267ab568 & 03cebdd7ef92 in openembedded-core, the
`cortexa72-crc` tune is no longer available and the `cortexa72` tune
includes the crc extension by default. Update the raspberrypi4-64
machine config to handle these changes.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
After the commit [1] introduced in openembedded-core layer,
some configure options is't carried over include xshmfence
option, so remove the xshmfence configure option to silence
the below warning.
WARNING: xserver-xorg-2_21.1.1-r0 do_configure: QA Issue: xserver-xorg: invalid PACKAGECONFIG: xshmfence [invalid-packageconfig]
[1] https://git.openembedded.org/openembedded-core/commit/?id=e05abd87ee5d23750c641d0129d9c83db68ee2e8
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
- Feature is enabled with ENABLE_GPIO_SHUTDOWN variable
- Include the gpio-shutdown overlay
- If using SysV init include the additional keymap and inittab entries
to bind the KEY_POWER event
- Systemd init does not require any additional bindings
Signed-off-by: Otto Esko <otto.esko@gmail.com>
Switch to using bullseye release 20210315-3+rpt3
License is pointed in different location in new repo structure WHENCE
file is gone too.
Fixes
https://github.com/YoeDistro/yoe-distro/issues/617
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Some machines need to have the kernel toggle a gpio when an external
power source needs to shut off power to complete a shutdown and de-energize
the processor. gpio-poweroff provides this functionality but was omitted
from the kernel overlays brought oveer by the rpi-layer from the kernel.
Signed-off-by: Cameron Kellough <cameron@telemetrak.com>
