Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
The device tree only supports a single CAN interface. This prevents
compatiblity with dual-CAN boards like the PiCAN2 Duo.
The mcp2515-can1 device tree blob for overlay was added to RPI_KERNEL_DEVICETREE_OVERLAYS in order to support dual-CAN hats.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
The u-boot-env is provided by u-boot recipe and not by libubootenv, so
right recipe to append is the u-boot.
Adding the rpi-u-boot-scr in DEPENDS variable is wrong because it is
forcing rpi-u-boot-scr to be a dependency, but it'll fail if I have
another recipe that provides bootscript, once both recipes provide the
same file. The default value of u-boot-default-script is rpi-u-boot-scr,
so right way is to use u-boot-default-script and change the
PREFERRED_PROVIDER_u-boot-default-script if needed.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
(cherry picked from commit fc72c06141)
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
As per the example in the bsp-guide, and the qemu and other machine
configs. Assists when running virtualized, where serial console
device can differ.
Signed-off-by: Christopher Clark <christopher.w.clark@gmail.com>
Add instructions how to use variable ENABLE_IR for infrared
support, for example with LIRC.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add kernel modules gpio-ir and gpio-ir-tx to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_IR is set to 1.
Variable ENABLE_IR enables infrared support (for LIRC). This
change affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Fixes:
ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure: Unable to find revision 856e83151cf3f802c495585ac176bb135a08030f in branch rpi-5.4.y even from upstream
ERROR: linux-raspberrypi-1_5.4.50+gitAUTOINC+856e83151c-r0 do_fetch: Fetcher failure for URL: 'git://github.com/raspberrypi/linux.git;branch=rpi-5.4.y'. Unable to fetch URL from any source.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add fw_env.config that uses at run-time /boot/uboot.env generated
through the boot scripts (specifically boot.cmd.in) from recipe
rpi-u-boot-scr. This configuration file is required to
successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Modify boot.cmd.in from recipe rpi-u-boot-scr to create uboot.env
in the /boot partition when using U-Boot. This change is required
to successfully run fw_printenv from the user space.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
With stock u-boot v2020.01 which we use from poky CM3 module won't boot.
We need to apply this patch in order to have platform again working.
Add it only for cm3 to not break anything else.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Temporary remove the LIRC patch because it is not compatible with
version 0.9.4d which is at the moment provided by branch dunfell
from meta-openembedded/meta-oe. This patch should be applied again
when LIRC version 0.10.1 or newer is available at branch dunfell
of meta-openembedded/meta-oe (as of the moment this version is
available at master).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Apply Raspberry Pi specific fix to use LIRC with gpio-ir kernel
module with which the signal from /dev/lircX is slightly different
from that of lirc_dev (which was used with older LIRC and kernel
versions). The patch has been published by neuralassembly and he
has shared more details in the Raspberry Pi community forum:
https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=235256
LIRC ticket #359 tracks the upstreaming of this issue:
https://sourceforge.net/p/lirc/tickets/359/
Co-authored-by: neuralassembly <neuralassembly@gmail.com>
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add device tree binary overlays gpio-ir-tx and gpio-ir-tx to
support peripherals for sending and receiving infrared signals.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Corrects README.md to indicate that the new generated image extension is
.wic.bz2 rather than sdimg as previously stated.
Signed-off-by: Brandon Verkamp <jadelclemens@gmail.com>
Add kernel modules i2c-dev and i2c-bcm2708 to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS if ENABLE_I2C is set to 1.
This affects images based on packagegroup-core-boot, including
the core-image-minimal image.
For other images (based on packagegroup-base) kernel modules
are provide through variable MACHINE_EXTRA_RRECOMMENDS.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This simply causes build warnings about priority of two packages being
same, but infact this is redundant, therefore remove setting ALTERNATIVE_PRIORITY
for psplash-raspberrypi
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Add kernel modules, including i2c-dev and i2c-bcm2708, to variable
MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS. This way kernel modules will
be present in all images based on packagegroup-core-boot,
including the core-image-minimal image.
Otherwise, if modules, are in variable MACHINE_EXTRA_RRECOMMENDS
they will be added only in images based on packagegroup-base,
which does not include the core-image-minimal or
core-image-full-cmdline images.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Will let system hibernate and suspend, its initial setup, there is more
work needed to get it going fully without problems in userspace, which
will follow
Signed-off-by: Khem Raj <raj.khem@gmail.com>
perf fails to build without bfd patch still, therefore apply it to 5.4
as well.
Update to latest on 5.4 branch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
5.4 is slated to be next hop for linux-raspberrypi, here add the
recipes, default is still 4.19, we can switch that later
Signed-off-by: Khem Raj <raj.khem@gmail.com>
pi3-disable-bt is renamed to disable-bt and pi3-miniuart-bt is renamed
to miniuart-bt in 2014, now with 5.4 these are not recognised anymore
and miniuart-bt and disable-bt are already part of RPI_KERNEL_DEVICETREE_OVERLAYS
Signed-off-by: Khem Raj <raj.khem@gmail.com>
