Currently, we are installing the rpi custom txt and fw files whenever
the meta-raspberrypi layer is included in bblayers.conf. This breaks
other machines that need to use the bcm43430 drivers but with alternate
txt or fw files.
Install these files only when "rpi" is in MACHINEOVERRIDES.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
There hasn't been a tagged version of the firmware lately, but there have been
several bugfixes listed in the commit history and we're about to move to v4.14.y
as the default kernel so let's get up-to-date.
The actual commit used is the most recent change to the firmware files as of
2018-02-26, the most recent commits which only change the kernel image and other
files we don't use are ignored.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Sphinx will use the 'alabaster' theme by default when building locally. However,
Read the Docs will use their own theme by default which suits their site better.
By not specifying html_theme we allow both targets to use the appropriate
default theme.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* As we now use GitHub for development we should point users at this repo.
* Layer documentation is now published on Read the Docs.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
[rocko]: Pointed at rocko documentation instead of latest
Recently wic was modified to no longer exclude /boot from partitions
added to fstab. The --on parameter in many kickstart specifications
insufficiently resolved the MMC device, resulting in attempts to mount
/dev/mmcblkp1 as boot when the device should be /dev/mmcblk0p1.
With systemd the mount failure is an error and the system drops into
emergency mode.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
(cherry picked from commit 0e1e2c6e0a)
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
userland package is the Raspberry Pi provider for the openGL stack.
If selected, it shall provide the gles2 and egl stacks in conjunction
with mesa-gl.
libegl was missing in the RPROVIDES variable, thus some run-time
dependencies were not met when using userland as provider.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
This used to work in the past because this machine was based on raspberrypi
one. Now that they are separate, we need a configuration for it too otherwise:
| common/arm/quant-a.S: Assembler messages:
| common/arm/quant-a.S:362: Error: selected processor does not support `rbit
r1,r1' in ARM mode
| common/arm/quant-a.S:363: Error: selected processor does not support `rbit
r1,r1' in ARM mode
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
rpi-backend.so was an attempt to create a specialized
weston backend to be used on raspberry pi like platforms.
At the moment, this backend's support has been dropped in favor
of using the standard drm backend, as the vc4 driver is now mainline
in mesa and in kernel (for kernel support).
As a result, weston on raspberry pi does not require the rpi-backend.so
anymore, nor it is buildable (weston's configure complains about
unrecognized configuration switch).
This patch enables weston to natively run on the DRM backend.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
* this reverts commit 04b37dbdb7.
* this makes qtbase and everything which depends on some qt* recipe to
be effectivelly MACHINE_ARCH
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
This allow for bbappend files to be enabled when specific layers are
included.
Change-Id: Iecbcf0de85a64aad71605b60ecd3d9a2586fae85
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
We need to ensure that the bootloader and firmware files are present in the
deploy directory before creating wic images.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The timestamp in the rootfs partition image filename may not match the current
timestamp if the do_image_rpi_sdimg step is repeated without repeating the
previous do_image_ext3 (or similar) step.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
These commands are unnecessary and seem to mask failures to find the rootfs.ext3
file when re-running the do_image_rpi_sdimg stage without re-running the
preceeding do_image_ext3 stage.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
For raspberrypi3-64 we need to use the Image or Image.gz format with u-boot
instead of the legacy uImage format. We also need to issue the 'booti' command
to boot the kernel instead of 'bootm'.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There is no reason to continue supporting pre-4.8 series kernels so we can move
the setting of LOADADDR to the common inc file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
There is no need to have 2 separate inc files any more and the existing code has
several duplications.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The code to determine if we need to depend on lzop-native will fail as the local
defconfig file no longer exists.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The only remaining function in linux-raspberrypi-base was split_overlays() which
is used in the sdcard_image-rpi class. So we can move this function over and
drop the now-empty linux-raspberrypi-base class.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* The kerneltype variable is not used anywhere after being set.
* The manipulation of KERNEL_DEVICETREE is effectively a no-op, we read the
current value in get_dts() and store this back into the same variable.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
* Update the recipe and patch the Makefile to not require internet access during
do_compile. Unfortunately, the upstream Makefile wants to access a web service
hosted on Heroku and to "git clone" ffmpeg with no fixed commit hash.
* Patch Makefile.ffmpeg to avoid a potential race condition between the
configure & compile stages.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The version of this firmware provided by linux-firmware is 7.45.41.26. This
version seems to have connectivity issues when bonding interfaces. Raspbian
included an updated version (7.45.41.46) which tested, proved to fix this
problem (see https://github.com/resin-os/meta-resin/issues/812).
The version Raspbian is providing is not yet in linux-firmware as they have it
directly from Cypress (see https://github.com/RPi-Distro/repo/issues/88).
Besides the issue described above, it fixes various other issues including a
broadpwn fix.
Hopefully this version, or a newer one, will end up in upstream soon. In order
to catch when that happens and stop overwriting this firmware, a check is added
in the racipe based on the md5sum of the current shipped firmware.
In terms of ditribution license, we got an informal one in the github thread
mentioned above.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
OE currently builds dtb files with its own custom targets by
specifying each dtb file as makefile target, this creates bad
dtb for rpi64 bit. This patch calles 'make dtbs' at the end
which regenerates the correct dtb files
This makes the vc4 initialize properly on rpi64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Use correct overlay for enabled vc4 accelaration
This enable 3D accelaration over dispmanx on vc4/rpi64
Enable audio over HDMI
Disable overscan to avoid graphics glitches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
oe-core now provides v2017.09 of u-boot which already merged both patches
introduced by commit 94e2929f74 so we can
drop them from meta-raspberrypi.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
