Fixes#1095 where setting cma to a lower value affects the ability of
libcamera-apps to capture higher resolution images.
Signed-off-by: Devendra Tewari <devendra.tewari@gmail.com>
Otherwise the shell snippet fails with `bad syntax` when `CMDLINE`
contains special characters like `${...}` (useful to insert a U-Boot
variable in `cmdline.txt`).
Signed-off-by: Lluis Campos <lluis.campos@northern.tech>
- Feature is enabled with ENABLE_GPIO_SHUTDOWN variable
- Include the gpio-shutdown overlay
- If using SysV init include the additional keymap and inittab entries
to bind the KEY_POWER event
- Systemd init does not require any additional bindings
Signed-off-by: Otto Esko <otto.esko@gmail.com>
The Raspberry Pi firmware does not support lines exceeding 80 bytes.
This is documented at https://www.raspberrypi.com/documentation/computers/config_txt.html#file-format
It seems that comments can be longer but it's still best to avoid this
problem instead of debug it. Detect the situation in do_deploy_append
and bbwarn if the limit is exceeded.
Connected to #917
Signed-off-by: Zygmunt Krynicki <me@zygoon.pl>
This is the result of automated script conversion:
oe-core/scripts/contrib/convert-overrides.py .
converting the metadata to use ":" as the override character instead of "_".
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
The cmdline.txt file generated by this recipe includes machine-specific
information so we should set PACKAGE_ARCH appropriately.
Signed-off-by: Paul Barker <paul@pbarker.dev>
With current recipe formatting CMDLINE variable contains
many unnecessary white spaces. This patch allow to drop
unnecessary spaces at the moment of writing them to
cmdline.txt. This will improve readability of cmdline.txt,
/proc/cmdline and dmesg output.
Signed-off-by: Bartłomiej Burdukiewicz <bartlomiej.burdukiewicz@gmail.com>
By default in case of CM4 IO board, the USB ports (header + built-in)
are disabled. In order to enable them the DWC2 mode needs to be set to
host.
Signed-off-by: Aurelian Zanoschi <aurelian17@gmail.com>
* instead of repeating //config.txt
so many times, to make it a bit less error prone (as shown in previous commit)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
* in https://github.com/agherzan/meta-raspberrypi/pull/678 this line was acidentally changed
from "${BOOTFILES_DIR_NAME}" to "bcm2835-bootfiles", causing do_deploy to fail finding config.txt
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
It seems like "start_x=1" needs to be earlier in the file to work properly on the Rapberry Pi 4 B.
Fixes: #670
Signed-off-by: SCVready <alejandro.solozabal@outlook.com>
This variable is set in rpi-base.inc and referenced by other recipes
which need to know the location of the bootfiles. If this is overridden
for any reason we need to ensure that the bootfiles recipe deploys to
the correct path.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Instead of generating cmdline.txt in the kernel recipe, it is generated
in a standalone recipe and pulled in as a dependency of the bootfiles
recipe. This simplifies the process of using a linux-yocto,
linux-mainline or similiar kernel recipe instead of linux-raspberrypi.
In the rpi-cmdline recipe the command line is built from fragments which
can all be easily overridden. The variables `SERIAL` and `CMA` are
renamed to `CMDLINE_SERIAL` and `CMDLINE_CMA` for consistency. The
cmdline.txt file is created in the do_compile step to allow further
customisation via do_compile_append if needed.
Signed-off-by: Paul Barker <pbarker@konsulko.com>
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
The raspberry pi 4 variant has a BCM2711 chip, however it still
uses the same boot files as the BCM2835 used in previous generations.
This change generalizes the naming of the directory generated in the
$DEPLOY_DIR to avoid the implication that the files are only
meant for the BCM2835.
Signed-off-by: Jeff Ithier <ithijme@gmail.com>
Current configuration (16MHz) is made for the PiCAN2 board that uses 16MHz crystal. This setting allows for use of Waveshare RS485 CAN HAT that has 8MHz crystal soldered (although according to Waveshare there is also a 12MHz crystal version of the board).
Signed-off-by: Jakub Luzny <jakub@luzny.cz>
Currently ENABLE_CAN adds mcp2525-can0 to the dtoverlay.
ENABLE_DUAL_CAN was added to also add mcp2515-can1 to the dtoverlay.
This will allow a user to enable dual CAN when using a hat like the
PiCAN 2 Duo board.
Signed-off-by: Colin McAllister <colinmca242@gmail.com>
Users who want infrared device tree overlays gpio-ir and
gpio-ir-tx to be set in config.txt can now easily do it through
variable ENABLE_IR, for example in local.conf:
ENABLE_IR = "1"
By default the GPIO pin for gpio-ir is set to 18 and the pin for
gpio-ir-tx is 17. Both pins can be easily changed by modifying
variables GPIO_IR and GPIO_IR_TX (for example in local.conf).
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Add support for the Adafruit PiTFT Plus 320x240 2.8" TFT with
Capacitive Touchscreen, using the same patterns used for the other
versions of the PiTFT screens.
Signed-off-by: Erik Botö <erik.boto@gmail.com>
This RaspberryPi firmware update includes a change in the license file
as well[1]. This change is for supporting customisation program.
[1] dd9e9ebb5d
As a result of this change, we update the hash in the bcm2835-bootfiles
recipe as well.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Intuitively, bcm2835-bootfiles:do_deploy should depend on rpi-config:do_deploy.
This indirectly resolves a missing dep between rpi-config:do_deploy and
do_image_rpi_sdimg (on an image recipe inheriting from sdcard_image-rpi.bbclass).
This manifested as changes to rpi-config (e.g. setting or unsetting
ENABLE_* variables) not triggering a rebuild of the SD card image.
Signed-off-by: Chris Laplante <mostthingsweb@gmail.com>
When we read the docs, we have the feelings that theses variables are
boolean ones. So I was setting, for example in my distro.conf file the
variable ' ENABLE_I2C = "1" ' to enable I2C. Then I wanted to disable it
by simply setting 'ENABLE_I2C' to "0" but it wasn't working. So I
noticed that, for example, ' ENABLE_UART ' was checked with ' = "1" '
condition and some other "boolean" was checked against ' -n ' like for
ENABLE_I2C.
This commit tries to have an uniform behavior for all variables that are
shown in the doc under the format ' VARIABLE = "1" ' to enable them and
the reader can think they are kind of 'boolean' values.
Signed-off-by: Joël Carron <joel.carron@eeproperty.ch>
vc4-fkms-v3d needs dispmanx, its DRM VC4 V3D driver on top of the dispmanx
display stack, this does not work with 4.14 kernel and since we always
use vc4graphics on 64bit, just keep using vc4-kms-v3d dtbo which should
enable right graphics
Tested with core-image-sato, running glxgears with 55.5fps in
raspberrypi3-64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
RDEPENDS is fairly meaningless for recipes which don't create a package to be
installed into the rootfs. Instead we should be using DEPENDS to guarantee
correct ordering of build tasks.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
We have a few recipes which only deploy files that go into the boot partition
and do not create packages to be installed into the rootfs. These recipes don't
need to run the usual packaging tasks so we can drop them to speed up the build
a little.
We also have a bunch of recipes that don't need the usual toolchain as they just
copy files or invoke native commands like `mkimage`. So to speed up the build a
little more we can set INHIBIT_DEFAULT_DEPS to avoid an unnecessary dependency
on the toolchain.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Added support for and documented the following new extra build options:
* gpu_freq overclocking option
* disable boot rainbow splash screen
* configure the boot delay after GPU firmware loading
* configure common HDMI and composite video options
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
