Also:
- update the HOMEPAGE location
- refresh patch
- use 'distutils3' to support python3 -> python2 is now deprecated
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Add udev-rules-rpi as a runtime dependency. It brings udev rules
for creating /dev/serial1. This way hciuart.service, provided by
pi-bluetooth, will be successfully started because it depends
on dev-serial1.device. As a result the Bluetooth module will
be properly attached via UART HCI to BlueZ stack.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
This RaspberryPi firmware update includes a change in the license file
as well[1]. This change is for supporting customisation program.
[1] dd9e9ebb5d
As a result of this change, we update the hash in the bcm2835-bootfiles
recipe as well.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Use the IMAGE_NAME_SUFFIX variable to build the SDIMG name. Some layers,
notably meta-mender, change the IMAGE_NAME_SUFFIX variable to something
other that ".rootfs", causing build failures.
Signed-off-by: Francois Retief <fgretief@gmail.com>
Also:
- remove upstreamed patch.
- update LIC_FILES_CHKSUM: License in the README was moved a
couple of lines below
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
This includes the following changes:
2eaa8b8 Initialise hwbase so that access without /dev/gpiomem works again
f36777c Whitespace tidyup (and re-ran astyle). No functional changes.
80fa7d0 Add support for 2711
bf7f4c8 Reformat with astyle (cosmetic change)
aa55bbd Autoreconf for Buster
5e453d0 raspi-gpio: Fix handling of "funcs" mode
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
All source files in the armstubs directory have a 3-clause BSD license.
The Makefile doesn't appear to use any files from outside this directory
during the build.
Signed-off-by: Paul Barker <paul@betafive.co.uk>
This updates brcmfmac43455-sdio.bin to version 7.45.189
and brcmfmac43430-sdio.bin to version 7.45.98.83
This updated upstream firmware also includes the changes from
0001-brcmfmac43455-sdio.txt-Follow-raspbian-change-for-bo.patch
so we remove this patch along with removing the do_clean_pc
function which is not needed anymore since we don't apply
any other patches to the upstream source.
Signed-off-by: Florin Sarbu <florin@balena.io>
Intuitively, bcm2835-bootfiles:do_deploy should depend on rpi-config:do_deploy.
This indirectly resolves a missing dep between rpi-config:do_deploy and
do_image_rpi_sdimg (on an image recipe inheriting from sdcard_image-rpi.bbclass).
This manifested as changes to rpi-config (e.g. setting or unsetting
ENABLE_* variables) not triggering a rebuild of the SD card image.
Signed-off-by: Chris Laplante <mostthingsweb@gmail.com>
Since we enabled vc4graphics by default[1], there is no easy way to disable
it if needed. This patch introduces a variable (DISABLE_VC4GRAPHICS)
which when set to '1' will not add 'vc4graphics' to MACHINE_FEATURES
forcing the old behaviour.
One could use it in 'local.conf' for example.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
As of late[1], we defaulted to enabling vc4graphics in MACHINE_FEATURES.
Let's cleanup the machine configurations as per this change.
[1] https://github.com/agherzan/meta-raspberrypi/pull/417
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Update linux kernel 4.14 series recipe for building with latest -rt
branch.
This fixes#474.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
Kernel 4.19.y and above was patched to rename the Raspberry Pi Zero W dts.
Unfortunately, this modification was not propagated to previous kernels,
especially on the 4.14.y series which is still supported in this layer.
Thus, kernel 4.14.y would not build because correct .dts file is not found.
The aforementioned modification was merged as backport back in 4.14.y series.
Updating to the latest commit fixes the issue.
Signed-off-by: Francesco Giancane <francescogiancane8@gmail.com>
The PCIe bounce buffers were ported[1] in the kernel so we can remove
this limitation now.
[1] https://github.com/raspberrypi/linux/pull/3144
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Videocore 5/6 support was added as a separate driver in mesa: v3d. Enable
this so we can have it available for Raspberry Pi 4. Also, this driver
depends on kmsro.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Bump revision to fix playback errors on RPi 4 (https://github.com/popcornmix/omxplayer/issues/733)
and update patches accordingly.
Update the license hash because of the change in FSF mailing address.
Signed-off-by: Kirill Goncharov <kdgoncharov@gmail.com>
* I have this in our layer for some time:
RPI_KERNEL_DEVICETREE_OVERLAYS_append = " overlays/vc4-fkms-v3d.dtbo"
because we're using vc4graphics also on raspberrypi3 and it was
working fine until recently.
* now the default rpi-base.inc in warrior and master branch includes the same since:
37aa050d5a
and do_image_rpi_sdimg started failing with a bit useless log:
...
Partition Table: msdos
Disk Flags:
Number Start End Size Type File system Flags
1 4194kB 46.1MB 41.9MB primary boot, lba
2 46.1MB 1145MB 1099MB primary
mkfs.fat: warning - lowercase labels might not work properly with DOS or
Windows
mkfs.fat 4.1 (2017-01-24)
WARNING: exit code 1 from a shell command.
* after adding -v to mcopy calls I got slightly better log:
...
Copying w1-gpio-pullup.dtbo
Copying w1-gpio.dtbo
WARNING: exit code 1 from a shell command.
* the issue is that mcopy behavior in non-interactive shell is to fail
when the target file already exists (sometimes it seems to cause mcopy
to hang forever), but when you execute the run.do_image_rpi_sdimg
script manually in interactive shell it will nicely show this prompt
on stderr:
$ dtb=vc4-fkms-v3d.dtbo recipe-sysroot-native/usr/bin/mcopy -i boot.img -s BUILD/deploy/images/raspberrypi3/$dtb ::overlays/$dtb
Long file name "vc4-fkms-v3d.dtbo" already exists.
a)utorename A)utorename-all r)ename R)ename-all o)verwrite O)verwrite-all
s)kip S)kip-all q)uit (aArRoOsSq): o
* with the bbfatal the log is finally a bit more useful:
...
Copying w1-gpio-pullup.dtbo
Copying w1-gpio.dtbo
ERROR: mcopy cannot copy TOPDIR/BUILD/deploy/images/raspberrypi3/vc4-fkms-v3d.dtbo into boot.img
WARNING: exit code 1 from a shell command.
* the only exception is FATPAYLOAD where it was ignoring mcopy with || true
before, I've added bbwarn, because even issues like mentioned there
"vfat issues like not supporting .~lock files" are probably worth
reporting as warning (why would people add .~lock to FATPAYLOAD if
it cannot be copied into boot.img)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
