The attempt to Raspbian updated firmware blobs in packages separate from
linux-firmware introduced unresolvable conflicts with the standard
linux-firmware roll-up package. Revert to using an augmented
linux-firmware recipe that overrides and adds firmware from two Raspbian
repositories that have up-to-date images.
Closes#244
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This along with some module and connman magic allows a RaspberryPi Zero
Wireless to tether to a host over USB.
dtoverlay=dwc2,dr_mode=peripheral
modprobe g_ether
connman enable gadget
connman tether gadget on
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
While wic is not a standard image, adding it to IMAGE_FSTYPES in
local.conf will fail unless a WKS_FILE is provided.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The dependency resolution code in bitbake has recently been optimized and this
seems to have slightly changed the behaviour of do_image_rpi_sdimg and
do_image_wic. We ensure that the main build artifacts are present by depending
on the relevant do_deploy and do_populate_sysroot tasks. However, we need to
ensure that other build tasks for these dependencies have also been executed
before we try to create our image. This can be achieved by adding a recursive
dependency on do_build, so that the do_build tasks of all recipes in the
dependency chain of do_image_rpi_sdimg/do_image_wic are executed before the
image function itself is executed.
The original issue seen here was that 'recipedata' files were not copied to
'tmp/deploy/licenses' as do_populate_lic for each dependency had not been ran
before the image creation function. The write_deploy_manifest function from
license.bbclass (listed in IMAGE_POSTPROCESS_COMMAND) therefore failed. Adding
the recursive dependency on do_build fixes this issue, ensuring do_populate_lic
runs before do_image_rpi_sdimg/do_image_wic.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
The kernel class is now using $KERNEL_PACKAGE_NAME to set the default
kernel package name in order to allow alternate kernel flavors.
This fixes the following bitbake warning:
Variable key RDEPENDS_${KERNEL_PACKAGE_NAME}-base (${KERNEL_PACKAGE_NAME}-image) replaces original key RDEPENDS_kernel-base ().
Signed-off-by: Ricardo Salveti <ricardo@opensourcefoundries.com>
* KERNEL_DEFCONFIG variable isn't used anywhere since this commit:
88478c3874
* it was replaced with KBUILD_DEFCONFIG:
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi0-wifi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi ?= "bcmrpi_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi2 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3 ?= "bcm2709_defconfig"
recipes-kernel/linux/linux-raspberrypi.inc:KBUILD_DEFCONFIG_raspberrypi3-64 ?= "bcmrpi3_defconfig"
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
We can't just override KERNEL_IMAGETYPE in machine-specific conf files without
breaking the implementation of RPI_USE_U_BOOT. Instead we need to define a new
KERNEL_IMAGETYPE_DIRECT variable which will control the value when u-boot is not
in use. This new variable may then be overridden as needed without breaking our
u-boot support.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Fixes: 50fd319205 for raspberrypi3-64.
Fixes: #153
For raspberrypi3-64 set default kernel image to "Image".
"zImage" are not supported by arm64 platforms. And ".gz" images are not
handled by bootloader yet.
Signed-off-by: Loys Ollivier <lollivier@baylibre.com>
We used to have this as the default but there was a bug at some point in the
firmware which didn't work with compressed kernel images. We switched to Image
and never changed it back even though that bug is long history.
In this way we will stop carrying 15M of a kernel image. 4M looks much better.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
This allow for bbappend files to be enabled when specific layers are
included.
Change-Id: Iecbcf0de85a64aad71605b60ecd3d9a2586fae85
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
We need to ensure that the bootloader and firmware files are present in the
deploy directory before creating wic images.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
For raspberrypi3-64 we need to use the Image or Image.gz format with u-boot
instead of the legacy uImage format. We also need to issue the 'booti' command
to boot the kernel instead of 'bootm'.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
Use correct overlay for enabled vc4 accelaration
This enable 3D accelaration over dispmanx on vc4/rpi64
Enable audio over HDMI
Disable overscan to avoid graphics glitches
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This commit allow wic generated images to work when we want u-boot to
load the kernel image.
Augment IMAGE_BOOT_FILES with the proper entries when KERNEL_IMAGETYPE
is "uImage". More specifically add u-boot image and boot.scr to deployed files
and give the proper name to the kernel image accordingly.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
currently there is no way to override the default SERIAL_CONSOLE,
this variable needs to be set only if the developer didn't set it already from
another layer.
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
Building the stock wic image for raspberrypi3-64 failed to find dtbs listed in
IMAGE_BOOT_FILES. This patch updates the make_dtb_boot_files() function to
account for dtbs listed in KERNEL_DEVICETREE that do include a path prefix:
this is the case for things like broadcom/bcm2710-rpi-3-b.dtb (the dts dir
layout in the kernel sources is different for arm64). Use the same approach
already used for overlays/ dir. While at it also fix a typo in dtb overlay
code path comments.
Signed-off-by: Andrea Galbusera <gizero@gmail.com>
As well make all the variables assigned in a way that they can be
overwritten so we can give maximum flexibility to distros.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
As well make all the variables assigned in a way that they can be
overwritten so we can give maximum flexibility to distros.
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Augment IMAGE_BOOT_FILES with entries picking up proper dtb[o]s. This allows for
building usable wic images once again.
Signed-off-by: Maciej Borzecki <maciej.borzecki@rndity.com>
This lets machines use ?= to choose their preferred kernel
e.g. 64bit rpi3 needs 4.9 minimum but default right now
is 4.4
At the same time it keeps the option for user to override
any of these settings via config metadata e.g. local.conf
Signed-off-by: Khem Raj <raj.khem@gmail.com>
U-boot configured with 'rpi_2_config' does not boot on a RaspberryPi 3.
Instead we need to configure with 'rpi_3_32b_config'.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
