mirror of git://git.yoctoproject.org/meta-raspberrypi.git synced 2025-07-19 12:59:03 +02:00

* Remove CI badges - I plan to move to github CI soon and they are broken
* anyway. So I might as well look into them when I migrate the CI.
* Update maintainer email.
* Drop temporary the sponsor logo - it breaks documentation builds in
  Read The Docs. I'll check it out when I revamp the docs.
* Update the matrix channel.

Signed-off-by: Andrei Gherzan <andrei@gherzan.com>

2021-11-14 00:19:25 +00:00

2.5 KiB

Raw Blame History

meta-raspberrypi

Yocto BSP layer for the Raspberry Pi boards - http://www.raspberrypi.org/.

Quick links

Git repository web frontend: https://github.com/agherzan/meta-raspberrypi
Mailing list (yocto mailing list): yocto@yoctoproject.org
Issues management (Github Issues): https://github.com/agherzan/meta-raspberrypi/issues
Documentation: http://meta-raspberrypi.readthedocs.io/en/latest/

Description

This is the general hardware specific BSP overlay for the RaspberryPi device.

More information can be found at: http://www.raspberrypi.org/ (Official Site)

The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

Distro-less (only with OE-Core).
Yoe Disto (Video and Camera Products).
Yocto/Poky (main focus of testing).

Dependencies

This layer depends on:

URI: git://git.yoctoproject.org/poky
- branch: master
- revision: HEAD
URI: git://git.openembedded.org/meta-openembedded
- layers: meta-oe, meta-multimedia, meta-networking, meta-python
- branch: master
- revision: HEAD

Quick Start

source poky/oe-init-build-env rpi-build
Add this layer to bblayers.conf and the dependencies above
Set MACHINE in local.conf to one of the supported boards
bitbake core-image-base
Use bmaptool to copy the generated .wic.bz2 file to the SD card
Boot your RPI

Quick Start with kas

Install kas build tool from PyPi (sudo pip3 install kas)
kas build meta-raspberrypi/kas-poky-rpi.yml
Use bmaptool to copy the generated .wic.bz2 file to the SD card
Boot your RPI

To adjust the build configuration with specific options (I2C, SPI, ...), simply add a section as follows:

local_conf_header:
  rpi-specific: |
    ENABLE_I2C = "1"
    RPI_EXTRA_CONFIG = "dtoverlay=pi3-disable-bt"

To configure the machine, you have to update the machine variable. And the same for the distro.

For further information, you can read more at https://kas.readthedocs.io/en/1.0/index.html

Maintainers

Andrei Gherzan <andrei at gherzan.com>

2.5 KiB Raw Blame History