Bernhard Guillon 596b92e8d1 rpi-base.inc: enable i2c-gpio overlay ... Adds support for software i2c controller on gpio pins RPI_EXTRA_CONFIG += "\ dtoverlay=i2c-gpio,bus=7,i2c_gpio_sda=6,i2c_gpio_scl=5 \ " Will configure a /dev/i2c-7 bus with sda=gpio#6 and slc=gpio#5 The overlay documentation can be found here: https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README Signed-off-by: Bernhard Guillon <Bernhard.Guillon@begu.org>		2022-02-20 00:00:22 +00:00
..
include	rpi-base.inc: enable i2c-gpio overlay	2022-02-20 00:00:22 +00:00
raspberrypi-cm.conf	raspberrypi*: Define ARMSTUB for all machines	2019-07-19 20:05:53 +01:00
raspberrypi-cm3.conf	machines: Use tune files from new location in oe-core	2021-08-20 11:22:56 +03:00
raspberrypi.conf	raspberrypi*: Define ARMSTUB for all machines	2019-07-19 20:05:53 +01:00
raspberrypi2.conf	machines: Use tune files from new location in oe-core	2021-08-20 11:22:56 +03:00
raspberrypi3-64.conf	machines: Use tune files from new location in oe-core	2021-08-20 11:22:56 +03:00
raspberrypi3.conf	machines: Use tune files from new location in oe-core	2021-08-20 11:22:56 +03:00
raspberrypi4-64.conf	raspberrypi4-64: Switch to cortexa72 tune	2022-01-21 11:45:23 +00:00
raspberrypi4.conf	conf/machine: add variant Wi-Fi/BT drivers for CM4 and Pi 400	2021-11-19 14:22:40 +00:00
raspberrypi0-2w-64.conf	conf/machine: Add Pi Zero 2 Wifi 64bit yocto machine	2021-11-13 23:30:28 +00:00
raspberrypi0-2w.conf	machine: add Pi Zero 2 W 32bits	2021-12-26 23:35:46 +00:00
raspberrypi0-wifi.conf	raspberrypi*: Define ARMSTUB for all machines	2019-07-19 20:05:53 +01:00
raspberrypi0.conf	machines: Drop VC4_CMA_SIZE	2018-11-07 14:25:00 +00:00