mirror of
git://git.yoctoproject.org/meta-raspberrypi.git
synced 2025-07-19 21:09:03 +02:00
c448bcd074
Added imx219.dtbo file in the overlays, and added dtoverlay in
/boot/config.txt define based.
To enable Sony Raspberry pi camera imx219 sensor, need to set
the variable RASPBERRYPI_CAMERA_V2 as 1.
In future, we can add any camera overlays here to support and
use them with libcamera.
Signed-off-by: Madhavan Krishnan <madhavan.krishnan@linaro.org>
(cherry picked from commit b70c7b9021)
Signed-off-by: Ricardo Salveti <ricardo@foundries.io>
247 lines
11 KiB
BlitzBasic
247 lines
11 KiB
BlitzBasic
DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \
|
|
The Raspberry Pi config.txt file is read by the GPU before \
|
|
the ARM core is initialised. It can be used to set various \
|
|
system configuration parameters."
|
|
LICENSE = "MIT"
|
|
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
|
|
|
|
COMPATIBLE_MACHINE = "^rpi$"
|
|
|
|
SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f"
|
|
SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \
|
|
"
|
|
|
|
S = "${WORKDIR}/git"
|
|
|
|
PR = "r5"
|
|
|
|
INHIBIT_DEFAULT_DEPS = "1"
|
|
|
|
PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}"
|
|
PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}"
|
|
PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}"
|
|
PITFT28c="${@bb.utils.contains("MACHINE_FEATURES", "pitft28c", "1", "0", d)}"
|
|
PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}"
|
|
|
|
VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}"
|
|
VC4DTBO ?= "vc4-kms-v3d"
|
|
GPIO_IR ?= "18"
|
|
GPIO_IR_TX ?= "17"
|
|
|
|
CAN_OSCILLATOR ?= "16000000"
|
|
|
|
inherit deploy nopackages
|
|
|
|
do_deploy() {
|
|
install -d ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}
|
|
|
|
cp ${S}/config.txt ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/
|
|
|
|
if [ -n "${KEY_DECODE_MPG2}" ]; then
|
|
sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${KEY_DECODE_WVC1}" ]; then
|
|
sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${DISABLE_OVERSCAN}" ]; then
|
|
sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ "${DISABLE_SPLASH}" = "1" ]; then
|
|
sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Set overclocking options
|
|
if [ -n "${ARM_FREQ}" ]; then
|
|
sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${GPU_FREQ}" ]; then
|
|
sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${CORE_FREQ}" ]; then
|
|
sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${SDRAM_FREQ}" ]; then
|
|
sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${OVER_VOLTAGE}" ]; then
|
|
sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# GPU memory
|
|
if [ -n "${GPU_MEM}" ]; then
|
|
sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_256}" ]; then
|
|
sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_512}" ]; then
|
|
sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${GPU_MEM_1024}" ]; then
|
|
sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Set boot delay
|
|
if [ -n "${BOOT_DELAY}" ]; then
|
|
sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${BOOT_DELAY_MS}" ]; then
|
|
sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Set HDMI and composite video options
|
|
if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then
|
|
sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${HDMI_DRIVE}" ]; then
|
|
sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${HDMI_GROUP}" ]; then
|
|
sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${HDMI_MODE}" ]; then
|
|
sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${CONFIG_HDMI_BOOST}" ]; then
|
|
sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${SDTV_MODE}" ]; then
|
|
sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${SDTV_ASPECT}" ]; then
|
|
sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ -n "${DISPLAY_ROTATE}" ]; then
|
|
sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Video camera support
|
|
if [ "${VIDEO_CAMERA}" = "1" ]; then
|
|
echo "# Enable video camera" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "start_x=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Offline compositing support
|
|
if [ "${DISPMANX_OFFLINE}" = "1" ]; then
|
|
echo "# Enable offline compositing" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dispmanx_offline=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# SPI bus support
|
|
if [ "${ENABLE_SPI_BUS}" = "1" ] || [ "${PITFT}" = "1" ]; then
|
|
echo "# Enable SPI bus" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtparam=spi=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# I2C support
|
|
if [ "${ENABLE_I2C}" = "1" ] || [ "${PITFT}" = "1" ]; then
|
|
echo "# Enable I2C" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtparam=i2c1=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# PiTFT22 display support
|
|
if [ "${PITFT22}" = "1" ]; then
|
|
echo "# Enable PITFT22 display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ "${PITFT28r}" = "1" ]; then
|
|
echo "# Enable PITFT28r display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ "${PITFT28c}" = "1" ]; then
|
|
echo "# Enable PITFT28c display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=pitft28-capacitive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=pitft28-capacitive,touch-swapxy,touch-invx" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
if [ "${PITFT35r}" = "1" ]; then
|
|
echo "# Enable PITFT35r display" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# UART support
|
|
if [ "${ENABLE_UART}" = "1" ]; then
|
|
echo "# Enable UART" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "enable_uart=1" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Infrared support
|
|
if [ "${ENABLE_IR}" = "1" ]; then
|
|
echo "# Enable infrared" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=gpio-ir,gpio_pin=${GPIO_IR}" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=gpio-ir-tx,gpio_pin=${GPIO_IR_TX}" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# VC4 Graphics support
|
|
if [ "${VC4GRAPHICS}" = "1" ]; then
|
|
echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=${VC4DTBO}" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Choose Camera Sensor to be used, default imx219 sensor
|
|
if [ "${RASPBERRYPI_CAMERA_V2}" = "1" ]; then
|
|
echo "# Enable Sony RaspberryPi Camera" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=imx219" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm)
|
|
if [ "${WAVESHARE_1024X600_C_2_1}" = "1" ]; then
|
|
echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "max_usb_current=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "hdmi_group=2" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "hdmi_mode=87" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "hdmi_drive=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# DWC2 USB peripheral support
|
|
if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then
|
|
echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# AT86RF23X support
|
|
if [ "${ENABLE_AT86RF}" = "1" ]; then
|
|
echo "# Enable AT86RF23X" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=at86rf233,speed=3000000" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# ENABLE DUAL CAN
|
|
if [ "${ENABLE_DUAL_CAN}" = "1" ]; then
|
|
echo "# Enable DUAL CAN" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=mcp2515-can1,oscillator=${CAN_OSCILLATOR},interrupt=24" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
# ENABLE CAN
|
|
elif [ "${ENABLE_CAN}" = "1" ]; then
|
|
echo "# Enable CAN" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtoverlay=mcp2515-can0,oscillator=${CAN_OSCILLATOR},interrupt=25" >>${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
fi
|
|
|
|
# Append extra config if the user has provided any
|
|
printf "${RPI_EXTRA_CONFIG}\n" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
|
|
# Handle setup with armstub file
|
|
if [ "${@bb.utils.contains("MACHINE_FEATURES", "armstub", "1", "0", d)}" = "1" ]; then
|
|
echo "\n# ARM stub configuration" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "armstub=${ARMSTUB}" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
case "${ARMSTUB}" in
|
|
*-gic.bin)
|
|
echo "enable_gic=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
;;
|
|
esac
|
|
fi
|
|
}
|
|
|
|
do_deploy_append_raspberrypi3-64() {
|
|
echo "# have a properly sized image" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "disable_overscan=1" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
|
|
echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
echo "dtparam=audio=on" >> ${DEPLOYDIR}/${BOOTFILES_DIR_NAME}/config.txt
|
|
}
|
|
|
|
addtask deploy before do_build after do_install
|
|
do_deploy[dirs] += "${DEPLOYDIR}/${BOOTFILES_DIR_NAME}"
|
|
|
|
PACKAGE_ARCH = "${MACHINE_ARCH}"
|