OpenEmbedded BSP Layer - RaspberryPi

This is the general hardware specific BSP overlay for the RaspberryPi device. It should be used with openembedded-core (not old-style org.openembedded.dev).

More information can be found at:

               http://www.raspberrypi.org/ (Official Site)
               http://www.distant-earth.com/ (My Site)

Build scripts patched to support making a firmware image for the RaspberryPi with Angstrom can be found at:

               http://github.com/Angstrom-distribution/setup-scripts

When not depending on meta-openembedded and not using systemd, you may need to mask few recipes requiring systemd or other recipes not included in your distribution of choice.

You can achieve this by adding something like the following to local.conf:

BBMASK = "meta-raspberrypi/recipes-multimedia/libav|meta-raspberrypi/recipes-core/systemd"

You can adjust the BBMASK for any .bbappends that your distribution does not contain recipes for.

The core BSP part of meta-raspberrypi should work with different OpenEmbedded/Yocto distributions and layer stacks, such as:

• Distro-less (only with OE-Core).
• Angstrom (main focus of testing).
• Yocto/Poky.

This layer in its entirety depends on:

URI: git://git.openembedded.org/openembedded-core branch: master revision: HEAD

URI: git://git.openembedded.org/meta-openembedded branch: master revision: HEAD

It is preferred that people raise pull requests using GIThub by forking the appropriate tree:

               https://github.com/djwillis/
               (More info on achieving this can be found at http://help.github.com/send-pull-requests/)

Yocto BSP Layer - RaspberryPi

This layer depends on:

URI: git://git.yoctoproject.org/poky branch: master revision: HEAD

URI: git://git.openembedded.org/meta-openembedded branch: master revision: HEAD

How to use it:

1. source poky/oe-init-build-env rpi-build
2. Add needed layers to bblayers.conf:
   • meta-raspberrypi
   • meta-openembedded/meta-oe 3 Set MACHINE to raspberrypi in local.conf
3. Add to local.conf: BBMASK = "rpi-zram-service"
4. bitbake rpi-hwup-image
5. dd to a SD card the generated sdimg file (use xzcat if rpi-sdimg.xz is used)
6. Boot your RPI.

Optional - compressed deployed files:

1. Overwrite IMAGE_FSTYPES in local.conf IMAGE_FSTYPES = "tar.bz2 ext3.xz rpi-sdimg.xz
2. Overwrite SDIMG_ROOTFS_TYPE in local.conf SDIMG_ROOTFS_TYPE = "ext3.xz" *Accommodate the values above to your own needs (ex: ext3 / ext4).

Optional - GPU firmware:

By default the GPU firmware shipped is arm192. You can overwrite this using the variable RPI_GPU_FIRMWARE with one of the values below.

arm128 : 128M ARM, 128M GPU split

arm192 : 192M ARM, 64M GPU split

arm224 : 224M ARM, 32M GPU split

arm240 : 240M ARM, 16M GPU split

Layer maintainer: John Willis <John.Willis at distant-earth.com> Andrei Gherzan