The FriendlyElec NanoPC-T6 is a one-for-all high performance open
source platform for edge computing, designed and developed by the
FriendlyElec team.
Website:
https://www.friendlyelec.com/index.php?route=product/product&path=69&product_id=292
Wiki:
https://wiki.friendlyelec.com/wiki/index.php/NanoPC-T6
Specs:
- Rockchip RK3588 (4x ARM Cortex-A76 + 4x Cortex-A55)
- ARM Mali-G610 MP4 (OpenGLES 1.1, 2.0, and 3.2, OpenCL up to 2.2 and Vulkan 1.2)
- 4GB/8GB/16GB LPDDR4X
- µSD
- 32GB/64GB/256GB eMMC
- 32MB SPI NOR Flash
- 2x PCIe 2.5G Ethernet
- 1x USB 3.0 Type A, 1x USB Type C
- 2x USB 2.0 Type A (LTS model)
- 1x HDMI (4Kp60) in
- 2x HDMI (HDMI2.1, HDMI2.0, and HDMI1.4, 1x 8Kp60, 1x 4Kp60) out
- 2x 4-lane MIPI-CSI
- 2x 4-lane MIPI-DSI
- 1x M.2 M-Key connector with PCIe 3.0 x4
- 1x M.2 E-key connector with PCIe 2.1 x1 and USB2.0 Host
- 1x Mini PCIe for 3G/4G module (non-LTS model)
- 40-pin 2.54mm header (up to 2x SPIs, 6x UARTs, 1x I2Cs, 8x PWMs, 2x I2Ss, 28x GPIO)
- 110 x 80 mm
Upstream kernel support for the T6 has matured enough to be usable, so
add a machine configuration to allow people to migrate off of the older
bits in the Rockchip BSP layer. Note that there are two variants of
the board, original and a newer "LTS" version that drops the MiniPCIe
slot for a modem for two extra USB 2.0 ports and adds a USB-C connector
for the debug UART. Devicetrees for both are shipped.
Reviewed-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
The radxa-zero-3{e|w} devices are not supported in the current yocto kernel,
but they are supported in the yocto-dev kernel. Switch to yocto-dev until
support is available in the yocto kernel.
Reported-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
Reviewed-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
Signed-off-by: Trevor Woerner <trevor.woerner@amd.com>
Upstream kernel support for both the rock-5a and rock-5b landed in version
6.5. Nanbield contained linux-yocto recipes for both 6.1 and 6.5 so it
was best to simply have these MACHINEs use linux-yocto-dev. Post-nanbield
oecore master only has a recipe for 6.6 (so far), therefore these two
MACHINEs can use linux-yocto by default, instead of linux-yocto-dev.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
The Radxa ROCK 5 Model A is an SBC in roughly a RaspberryPi-ish form factor
packed with a wide range of class-leading functionality, features and
expansion options. The ROCK 5A board comes in several LPDDR4x RAM memory
options: 4GB, 8GB, 16GB, and 32GB.
It uses the Rockchip RK3588S SoC (quad A76 @ 2.2GHz + quad A55 @ 1.8GHz,
Mali G610mp4 GPU), has both 8k and 4k HDMI, Gb ethernet with PoE support,
USB2/3, M.2 E Key (NVMe or SATA), a 40-pin RaspberryPi-ish 3V3 GPIO header,
USB Type-C power, MIPI DSI/CSI, SDcard slot, optional eMMC, and more.
https://wiki.radxa.com/Rock5/5bhttps://radxa.com/products/rock5/5a/
[
with the following tweaks by Trevor:
- switch to information URL to one that points to information in english
- improved the commit message
- add rock-5a to README
]
Signed-off-by: Stephen Chen <stephen@radxa.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Add support for the Radxa Rock 5B
https://wiki.radxa.com/Rock5/5b
The device-tree for this board is better in the 6.5 (and later) kernels,
therefore set the kernel to linux-yocto-dev for now (eventually this won't be
needed as linux-yocto moves forward).
Unfortunately the TF-A project does not currently have support for
the rk3588. Therefore, for the time-being, the only way to supply a
TPL/DDR-init for the rk3588 is to use the closed-source rkbin binaries
from Rockchip. If/when TF-A adds support for the rk3588 we can investigate
switching.
The rk3588 comes in two variants: rk3588 and rk3588s. The "s" option is a
stripped-down version of the rk3588. In the Linux kernel these two SoCs are
kept separate, with the rk3588 building on the rk3588s, so we've mimicked that
same behaviour here.
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
The COMPATIBLE_MACHINE strings were getting unwieldy, so switch to the
MACHINEOVERRIDE notation so they're neater.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Add support for Radxa's ROCK Pi E device
https://wiki.radxa.com/RockpiE
It's a great surprise to find upstream U-Boot and the Linux kernel already
provide support for this board! On the kernel side this support was
added in 5.11. However, that support is so new that even linux-yocto-dev
(which is based on 5.11) doesn't include the commits that add support
for this board yet. As a result I've added a custom Linux kernel recipe
(linux-stable-bleeding) which should, in time, become unnecessary.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
