Make setting the PACKAGE_ARCH occur only when the user has enabled the
rk-rauc-demo feature.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Since this bbappend is modifying the rauc config file with a MACHINE-specific
search-and-replace, the architecture setting of the package needs to be
MACHINE-specific as well. Otherwise if multiple images are built for the same
SoC, the sstate mechanism will use the first-built SoC copy of the
rauc/system.conf file, which may or may not match this device's MACHINE
setting.
At runtime this leads to compatible mismatch issues:
# rauc install <bundle>
...
LastError: Compatible mismatch: Expected 'nanopi-r2s' but bundle manifest has 'rock-pi-e'
These errors can be worked around by using the "--ignore-compatible" cmdline
switch to the "rauc install" command. Or can be fixed by updating the
on-device /etc/rauc/system.conf file and restarting the rauc.service systemd
service unit. This patch, however, is the more correct, build-time, fix,
rather than having to fix the issue at run-time.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
The radxa-zero-3{e|w} devices are not supported in the current yocto kernel,
but they are supported in the yocto-dev kernel. Switch to yocto-dev until
support is available in the yocto kernel.
Reported-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
Reviewed-by: Oleksii Kurochko<oleksii.kurochko@gmail.com>
Signed-off-by: Trevor Woerner <trevor.woerner@amd.com>
The rauc demo implementation provided by this layer uses ext4-formatted
partitions. Therefore the tool required to format ext4 partitions is required
otherwise the repartitioning will fail.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
The kernel needs a couple configuration tweaks in order to work with RAUC, and
the default upstream kernel recipes already have this built-in due to
meta-rauc. The non-upstream, one-off kernel required to support the Radxa Zero
3{e|w} boards (linux-torvalds-next) needs a similar tweak.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Add an example of implementing rauc on a rockchip board. Adding the meta-rauc
layer, adding 'rauc' to DISTRO_FEATURES, and enabling RK_RAUC_DEMO will build
an image using the example provided in dynamic-layers/rk-rauc-demo.
This example uses a simple A/B + D scheme (i.e. two root partitions and a
non-updated /data partition). Repartitioning occurs automatically on first
boot thanks to systemd's 'repart' mechanism.
NOTE:
- this example only works with systemd
If you wish to provide your own implementation, simply add the meta-rauc
layer, add 'rauc' to DISTRO_FEATURES, don't enable RK_RAUC_DEMO, and provide
your own implementation in a separate layer.
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
With bitbake commit 7dcf317cc141dc980634f8c18bfa84f83e57206a
("bitbake: Switch to using new override syntax"), applied on
Aug 2, 2021, the OVERRIDE separator is now a colon instead of
an underscore. Therefore all builds performed with a bitbake
before this change must use a meta-rockchip commit before this
one, and any builds performed with a bitbake after this change
must use a meta-rockchip starting from this commit onwards.
Build-tested for all meta-rockchip MACHINEs.
Run tested on:
- tinker-board
- nanopi-m4-2gb
- rock64
- rock-pi-4b
- rock-pi-e
The tinker-board and rock-pi-e work fine. The rest of the boards
seem to have a, hopefully unrelated, issue running a
5.13-yocto-standard kernel. However, all boards work with the
5.10-yocto-standard kernel.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
This ensures that DISTRO_FEATURES can translate correctly
for qtbase PACKAGECONFIGs and we can get right platforms enabled.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
