libvirt: Initial package creation.

Signed-off-by: Raymond Danks <ray.danks@se-eng.com>

recipes-extended/libvirt/libvirt-python.inc

@@ -0,0 +1,13 @@
+inherit python-dir
+
+# Enable the Python tool support
+EXTRA_OECONF += "--with-python=yes"
+
+SRC_URI += " file://oe_PYTHON_INCLUDES.patch"
+
+DEPENDS  += "python python-native"
+RDEPENDS_${PN}-python += "python xen-python"
+
+PACKAGES += "${PN}-python-dbg ${PN}-python"
+FILES_${PN}-python-dbg += "${libdir}/${PYTHON_DIR}/site-packages/.debug/"
+FILES_${PN}-python += "${libdir}/${PYTHON_DIR}/site-packages"

recipes-extended/libvirt/libvirt/libvirtd.conf

@@ -0,0 +1,393 @@
+# Master libvirt daemon configuration file
+#
+# For further information consult http://libvirt.org/format.html
+#
+# NOTE: the tests/daemon-conf regression test script requires
+# that each "PARAMETER = VALUE" line in this file have the parameter
+# name just after a leading "#".
+
+#################################################################
+#
+# Network connectivity controls
+#
+
+# Flag listening for secure TLS connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# It is necessary to setup a CA and issue server certificates before
+# using this capability.
+#
+# This is enabled by default, uncomment this to disable it
+listen_tls = 0
+
+# Listen for unencrypted TCP connections on the public TCP/IP port.
+# NB, must pass the --listen flag to the libvirtd process for this to
+# have any effect.
+#
+# Using the TCP socket requires SASL authentication by default. Only
+# SASL mechanisms which support data encryption are allowed. This is
+# DIGEST_MD5 and GSSAPI (Kerberos5)
+#
+# This is disabled by default, uncomment this to enable it.
+listen_tcp = 1
+
+
+
+# Override the port for accepting secure TLS connections
+# This can be a port number, or service name
+#
+#tls_port = "16514"
+
+# Override the port for accepting insecure TCP connections
+# This can be a port number, or service name
+#
+#tcp_port = "16509"
+
+
+# Override the default configuration which binds to all network
+# interfaces. This can be a numeric IPv4/6 address, or hostname
+#
+#listen_addr = "192.168.0.1"
+
+
+# Flag toggling mDNS advertizement of the libvirt service.
+#
+# Alternatively can disable for all services on a host by
+# stopping the Avahi daemon
+#
+# This is enabled by default, uncomment this to disable it
+#mdns_adv = 0
+
+# Override the default mDNS advertizement name. This must be
+# unique on the immediate broadcast network.
+#
+# The default is "Virtualization Host HOSTNAME", where HOSTNAME
+# is subsituted for the short hostname of the machine (without domain)
+#
+#mdns_name = "Virtualization Host Joe Demo"
+
+
+#################################################################
+#
+# UNIX socket access controls
+#
+
+# Set the UNIX domain socket group ownership. This can be used to
+# allow a 'trusted' set of users access to management capabilities
+# without becoming root.
+#
+# This is restricted to 'root' by default.
+#unix_sock_group = "libvirt"
+
+# Set the UNIX socket permissions for the R/O socket. This is used
+# for monitoring VM status only
+#
+# Default allows any user. If setting group ownership may want to
+# restrict this to:
+#unix_sock_ro_perms = "0777"
+
+# Set the UNIX socket permissions for the R/W socket. This is used
+# for full management of VMs
+#
+# Default allows only root. If PolicyKit is enabled on the socket,
+# the default will change to allow everyone (eg, 0777)
+#
+# If not using PolicyKit and setting group ownership for access
+# control then you may want to relax this to:
+#unix_sock_rw_perms = "0770"
+
+# Set the name of the directory in which sockets will be found/created.
+#unix_sock_dir = "/var/run/libvirt"
+
+#################################################################
+#
+# Authentication.
+#
+#  - none: do not perform auth checks. If you can connect to the
+#          socket you are allowed. This is suitable if there are
+#          restrictions on connecting to the socket (eg, UNIX
+#          socket permissions), or if there is a lower layer in
+#          the network providing auth (eg, TLS/x509 certificates)
+#
+#  - sasl: use SASL infrastructure. The actual auth scheme is then
+#          controlled from /etc/sasl2/libvirt.conf. For the TCP
+#          socket only GSSAPI & DIGEST-MD5 mechanisms will be used.
+#          For non-TCP or TLS sockets,  any scheme is allowed.
+#
+#  - polkit: use PolicyKit to authenticate. This is only suitable
+#            for use on the UNIX sockets. The default policy will
+#            require a user to supply their own password to gain
+#            full read/write access (aka sudo like), while anyone
+#            is allowed read/only access.
+#
+# Set an authentication scheme for UNIX read-only sockets
+# By default socket permissions allow anyone to connect
+#
+# To restrict monitoring of domains you may wish to enable
+# an authentication mechanism here
+#auth_unix_ro = "none"
+
+# Set an authentication scheme for UNIX read-write sockets
+# By default socket permissions only allow root. If PolicyKit
+# support was compiled into libvirt, the default will be to
+# use 'polkit' auth.
+#
+# If the unix_sock_rw_perms are changed you may wish to enable
+# an authentication mechanism here
+#auth_unix_rw = "none"
+
+# Change the authentication scheme for TCP sockets.
+#
+# If you don't enable SASL, then all TCP traffic is cleartext.
+# Don't do this outside of a dev/test scenario. For real world
+# use, always enable SASL and use the GSSAPI or DIGEST-MD5
+# mechanism in /etc/sasl2/libvirt.conf
+#auth_tcp = "sasl"
+
+# Change the authentication scheme for TLS sockets.
+#
+# TLS sockets already have encryption provided by the TLS
+# layer, and limited authentication is done by certificates
+#
+# It is possible to make use of any SASL authentication
+# mechanism as well, by using 'sasl' for this option
+#auth_tls = "none"
+
+
+
+#################################################################
+#
+# TLS x509 certificate configuration
+#
+
+
+# Override the default server key file path
+#
+#key_file = "/etc/pki/libvirt/private/serverkey.pem"
+
+# Override the default server certificate file path
+#
+#cert_file = "/etc/pki/libvirt/servercert.pem"
+
+# Override the default CA certificate path
+#
+#ca_file = "/etc/pki/CA/cacert.pem"
+
+# Specify a certificate revocation list.
+#
+# Defaults to not using a CRL, uncomment to enable it
+#crl_file = "/etc/pki/CA/crl.pem"
+
+
+
+#################################################################
+#
+# Authorization controls
+#
+
+
+# Flag to disable verification of our own server certificates
+#
+# When libvirtd starts it performs some sanity checks against
+# its own certificates.
+#
+# Default is to always run sanity checks. Uncommenting this
+# will disable sanity checks which is not a good idea
+#tls_no_sanity_certificate = 1
+
+# Flag to disable verification of client certificates
+#
+# Client certificate verification is the primary authentication mechanism.
+# Any client which does not present a certificate signed by the CA
+# will be rejected.
+#
+# Default is to always verify. Uncommenting this will disable
+# verification - make sure an IP whitelist is set
+#tls_no_verify_certificate = 1
+
+
+# A whitelist of allowed x509  Distinguished Names
+# This list may contain wildcards such as
+#
+#    "C=GB,ST=London,L=London,O=Red Hat,CN=*"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no DN's are checked
+#tls_allowed_dn_list = ["DN1", "DN2"]
+
+
+# A whitelist of allowed SASL usernames. The format for usernames
+# depends on the SASL authentication mechanism. Kerberos usernames
+# look like username@REALM
+#
+# This list may contain wildcards such as
+#
+#    "*@EXAMPLE.COM"
+#
+# See the POSIX fnmatch function for the format of the wildcards.
+#
+# NB If this is an empty list, no client can connect, so comment out
+# entirely rather than using empty list to disable these checks
+#
+# By default, no Username's are checked
+#sasl_allowed_username_list = ["joe@EXAMPLE.COM", "fred@EXAMPLE.COM" ]
+
+
+
+#################################################################
+#
+# Processing controls
+#
+
+# The maximum number of concurrent client connections to allow
+# over all sockets combined.
+#max_clients = 20
+
+
+# The minimum limit sets the number of workers to start up
+# initially. If the number of active clients exceeds this,
+# then more threads are spawned, upto max_workers limit.
+# Typically you'd want max_workers to equal maximum number
+# of clients allowed
+#min_workers = 5
+#max_workers = 20
+
+
+# The number of priority workers. If all workers from above
+# pool will stuck, some calls marked as high priority
+# (notably domainDestroy) can be executed in this pool.
+#prio_workers = 5
+
+# Total global limit on concurrent RPC calls. Should be
+# at least as large as max_workers. Beyond this, RPC requests
+# will be read into memory and queued. This directly impact
+# memory usage, currently each request requires 256 KB of
+# memory. So by default upto 5 MB of memory is used
+#
+# XXX this isn't actually enforced yet, only the per-client
+# limit is used so far
+#max_requests = 20
+
+# Limit on concurrent requests from a single client
+# connection. To avoid one client monopolizing the server
+# this should be a small fraction of the global max_requests
+# and max_workers parameter
+#max_client_requests = 5
+
+#################################################################
+#
+# Logging controls
+#
+
+# Logging level: 4 errors, 3 warnings, 2 information, 1 debug
+# basically 1 will log everything possible
+#log_level = 3
+
+# Logging filters:
+# A filter allows to select a different logging level for a given category
+# of logs
+# The format for a filter is:
+#    x:name
+#      where name is a match string e.g. remote or qemu
+# the x prefix is the minimal level where matching messages should be logged
+#    1: DEBUG
+#    2: INFO
+#    3: WARNING
+#    4: ERROR
+#
+# Multiple filter can be defined in a single @filters, they just need to be
+# separated by spaces.
+#
+# e.g:
+# log_filters="3:remote 4:event"
+# to only get warning or errors from the remote layer and only errors from
+# the event layer.
+
+# Logging outputs:
+# An output is one of the places to save logging information
+# The format for an output can be:
+#    x:stderr
+#      output goes to stderr
+#    x:syslog:name
+#      use syslog for the output and use the given name as the ident
+#    x:file:file_path
+#      output to a file, with the given filepath
+# In all case the x prefix is the minimal level, acting as a filter
+#    1: DEBUG
+#    2: INFO
+#    3: WARNING
+#    4: ERROR
+#
+# Multiple output can be defined, they just need to be separated by spaces.
+# e.g.:
+# log_outputs="3:syslog:libvirtd"
+# to log all warnings and errors to syslog under the libvirtd ident
+
+# Log debug buffer size: default 64
+# The daemon keeps an internal debug log buffer which will be dumped in case
+# of crash or upon receiving a SIGUSR2 signal. This setting allows to override
+# the default buffer size in kilobytes.
+# If value is 0 or less the debug log buffer is deactivated
+#log_buffer_size = 64
+
+
+##################################################################
+#
+# Auditing
+#
+# This setting allows usage of the auditing subsystem to be altered:
+#
+#   audit_level == 0  -> disable all auditing
+#   audit_level == 1  -> enable auditing, only if enabled on host (default)
+#   audit_level == 2  -> enable auditing, and exit if disabled on host
+#
+#audit_level = 2
+#
+# If set to 1, then audit messages will also be sent
+# via libvirt logging infrastructure. Defaults to 0
+#
+#audit_logging = 1
+
+###################################################################
+# UUID of the host:
+# Provide the UUID of the host here in case the command
+# 'dmidecode -s system-uuid' does not provide a valid uuid. In case
+# 'dmidecode' does not provide a valid UUID and none is provided here, a
+# temporary UUID will be generated.
+# Keep the format of the example UUID below. UUID must not have all digits
+# be the same.
+
+# NB This default all-zeros UUID will not work. Replace
+# it with the output of the 'uuidgen' command and then
+# uncomment this entry
+#host_uuid = "00000000-0000-0000-0000-000000000000"
+
+###################################################################
+# Keepalive protocol:
+# This allows libvirtd to detect broken client connections or even
+# dead client.  A keepalive message is sent to a client after
+# keepalive_interval seconds of inactivity to check if the client is
+# still responding; keepalive_count is a maximum number of keepalive
+# messages that are allowed to be sent to the client without getting
+# any response before the connection is considered broken.  In other
+# words, the connection is automatically closed approximately after
+# keepalive_interval * (keepalive_count + 1) seconds since the last
+# message received from the client.  If keepalive_interval is set to
+# -1, libvirtd will never send keepalive requests; however clients
+# can still send them and the deamon will send responses.  When
+# keepalive_count is set to 0, connections will be automatically
+# closed after keepalive_interval seconds of inactivity without
+# sending any keepalive messages.
+#
+#keepalive_interval = 5
+#keepalive_count = 5
+#
+# If set to 1, libvirtd will refuse to talk to clients that do not
+# support keepalive protocol.  Defaults to 0.
+#
+#keepalive_required = 1

recipes-extended/libvirt/libvirt/libvirtd.sh

@@ -0,0 +1,100 @@
+#!/bin/sh
+### BEGIN INIT INFO
+# Provides: libvirtd
+# Required-Start: $local_fs $network dbus
+# Required-Stop: $local_fs $network dbus
+# Default-Start: 2 3 4 5
+# Default-Stop: 0 1 6
+### END INIT INFO
+
+if [ -f /lib/lsb/init-functions ]
+then
+    . /lib/lsb/init-functions
+else
+    # int log_begin_message (char *message)
+    log_begin_msg () {
+        if [ -z "$1" ]; then
+	    return 1
+        fi
+        echo " * $@"
+    }
+
+    # int log_end_message (int exitstatus)
+    log_end_msg () {
+	
+    # If no arguments were passed, return
+	[ -z "$1" ] && return 1
+	
+    # Only do the fancy stuff if we have an appropriate terminal
+    # and if /usr is already mounted
+	TPUT=/usr/bin/tput
+	EXPR=/usr/bin/expr
+	if [ -x $TPUT ] && [ -x $EXPR ] && $TPUT hpa 60 >/dev/null 2>&1; then
+	    COLS=`$TPUT cols`
+	    if [ -n "$COLS" ]; then
+		COL=`$EXPR $COLS - 7`
+	    else
+		COL=73
+	    fi
+	    UP=`$TPUT cuu1`
+	    END=`$TPUT hpa $COL`
+	    START=`$TPUT hpa 0`
+	    RED=`$TPUT setaf 1`
+	    NORMAL=`$TPUT op`
+	    if [ $1 -eq 0 ]; then
+		echo "$UP$END[ ok ]"
+	    else
+		echo -e "$UP$START $RED*$NORMAL$END[${RED}fail${NORMAL}]"
+	    fi
+	else
+	    if [ $1 -eq 0 ]; then
+		echo "   ...done."
+	    else
+		echo "   ...fail!"
+	    fi
+	fi
+	return $1
+    }
+    
+    log_warning_msg () {
+	if log_use_fancy_output; then
+	    YELLOW=`$TPUT setaf 3`
+	    NORMAL=`$TPUT op`
+	    echo "$YELLOW*$NORMAL $@"
+	else
+	    echo "$@"
+	fi
+    }
+
+fi
+
+case "$1" in
+        start)
+                if [ -e /var/run/libvirtd.pid ]; then
+                        if [ -d /proc/$(cat /var/run/libvirtd.pid) ]; then
+                                echo "virtualization library already started; not starting."
+                        else
+                                echo "Removing stale PID file /var/run/libvirtd.pid."
+                                rm -f /var/run/libvirtd.pid
+                        fi
+                fi
+                log_begin_msg "Starting virtualization library daemon: libvirtd"
+		start-stop-daemon --start --quiet --pidfile /var/run/libvirtd.pid --exec /usr/sbin/libvirtd -- --daemon --listen
+                log_end_msg $?
+                ;;
+        stop)
+                log_begin_msg "Stopping virtualization library daemon: libvirtd"
+		start-stop-daemon --stop --quiet --retry 3 --exec /usr/sbin/libvirtd --pidfile /var/run/libvirtd.pid
+                log_end_msg $?
+                rm -f /var/run/libvirtd.pid
+                ;;
+        restart)
+                $0 stop
+                sleep 1
+                $0 start
+                ;;
+        *)
+                echo "Usage: $0 {start|stop|restart}"
+                exit 1
+                ;;
+esac

recipes-extended/libvirt/libvirt/oe_PYTHON_INCLUDES.patch

@@ -0,0 +1,39 @@
+--- libvirt-0.9.10/configure.ac.sav	2012-03-14 15:03:11.042785629 -0600
++++ libvirt-0.9.10/configure.ac	2012-03-14 15:17:13.722309867 -0600
+@@ -2052,26 +2052,22 @@
+         AM_PATH_PYTHON(,, [:])
+ 
+         if test "$PYTHON" != : ; then
+-            PYTHON_CONFIG="$PYTHON-config"
+-
+-            if test -x "$PYTHON_CONFIG"
++            if test -r `$as_dirname $PYTHON`/../include/python$PYTHON_VERSION/Python.h
++            then
++                PYTHON_INCLUDES=-I`$as_dirname $PYTHON`/../include/python$PYTHON_VERSION
++            elif test -r $PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION/Python.h
+             then
+-                PYTHON_INCLUDES=`$PYTHON_CONFIG --includes`
++                PYTHON_INCLUDES=-I$PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION
+             else
+-                if test -r $PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION/Python.h
++                if test -r $prefix/include/python$PYTHON_VERSION/Python.h
+                 then
+-                    PYTHON_INCLUDES=-I$PYTHON_EXEC_PREFIX/include/python$PYTHON_VERSION
++                    PYTHON_INCLUDES=-I$prefix/include/python$PYTHON_VERSION
+                 else
+-                    if test -r $prefix/include/python$PYTHON_VERSION/Python.h
++                    if test -r /usr/include/python$PYTHON_VERSION/Python.h
+                     then
+-                        PYTHON_INCLUDES=-I$prefix/include/python$PYTHON_VERSION
++                        PYTHON_INCLUDES=-I/usr/include/python$PYTHON_VERSION
+                     else
+-                        if test -r /usr/include/python$PYTHON_VERSION/Python.h
+-                        then
+-                            PYTHON_INCLUDES=-I/usr/include/python$PYTHON_VERSION
+-                        else
+-                            AC_MSG_ERROR([You must install python-devel to build Python bindings])
+-                        fi
++                        AC_MSG_ERROR([You must install python-devel to build Python bindings])
+                     fi
+                 fi
+             fi

recipes-extended/libvirt/libvirt_0.9.10.bb

@@ -0,0 +1,100 @@
+DESCRIPTION = "A toolkit to interact with the virtualization capabilities of recent versions of Linux." 
+HOMEPAGE = "http://libvirt.org"
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=fb919cc88dbe06ec0b0bd50e001ccf1f"
+SECTION = "console/tools"
+PR = "r1"
+
+DEPENDS="bridge-utils gnutls libxml2 lvm2 avahi polkit parted curl libpcap util-linux e2fsprogs xen pm-utils iptables ebtables dnsmasq"
+
+RDEPENDS_libvirt-libvirtd = "bridge-utils iptables pm-utils dnsmasq xen"
+
+SRC_URI = "http://libvirt.org/sources/libvirt-${PV}.tar.gz \
+	file://libvirtd.sh \
+	file://libvirtd.conf"
+
+SRC_URI[md5sum] = "a424bb793521e637349da47e93dd5fff"
+SRC_URI[sha256sum] = "5b81d9f054ee4b395b0ab4f59845d082baaa6d6c2a038c966309156dde16e11d"
+
+inherit autotools gettext update-rc.d
+
+# Trimmed down version for Xen daemon server
+EXTRA_OECONF="--with-xenapi=no --with-libxl=${STAGING_DIR_TARGET}/lib --with-xen=yes --with-xen-inotify=yes --with-qemu=no --with-uml=no --with-openvz=no --with-vmware=no --with-phyp=no  --with-libvirtd -with-vbox=no --with-esx=no --with-hyperv=no --with-test=yes --with-remote=yes --with-macvtap=no \
+ \
+ac_cv_path_XMLLINT=/usr/bin/xmllint \
+ac_cv_path_XMLCATLOG=/usr/bin/xmlcatalog \
+ac_cv_path_AUGPARSE=/usr/bin/augparse \
+ac_cv_path_DNSMASQ=/usr/bin/dnsmasq \
+ac_cv_path_BRCTL=/usr/sbin/brctl \
+ac_cv_path_TC=/sbin/tc \
+ac_cv_path_UDEVADM=/sbin/udevadm \
+ac_cv_path_MODPROBE=/sbin/modprobe \
+ac_cv_path_IP_PATH=/bin/ip \
+ac_cv_path_IPTABLES_PATH=/usr/sbin/iptables \
+ac_cv_path_IP6TABLES_PATH=/usr/sbin/ip6tables \
+ac_cv_path_MOUNT=/bin/mount \
+ac_cv_path_UMOUNT=/bin/umount \
+ac_cv_path_MKFS=/usr/sbin/mkfs \
+ac_cv_path_SHOWMOUNT=/usr/sbin/showmount \
+ac_cv_path_PVCREATE=/usr/sbin/pvcreate \
+ac_cv_path_VGCREATE=/usr/sbin/vgcreate \
+ac_cv_path_LVCREATE=/usr/sbin/lvcreate \
+ac_cv_path_PVREMOVE=/usr/sbin/pvremove \
+ac_cv_path_VGREMOVE=/usr/sbin/vgremove \
+ac_cv_path_LVREMOVE=/usr/sbin/lvremove \
+ac_cv_path_LVCHANGE=/usr/sbin/lvchange \
+ac_cv_path_VGCHANGE=/usr/sbin/vgchange \
+ac_cv_path_VGSCAN=/usr/sbin/vgscan \
+ac_cv_path_PVS=/usr/sbin/pvs \
+ac_cv_path_VGS=/usr/sbin/vgs \
+ac_cv_path_LVS=/usr/sbin/lvs \
+ac_cv_path_PARTED=/usr/sbin/parted \
+ac_cv_path_DMSETUP=/usr/sbin/dmsetup"
+
+# Some other possible paths we are not yet setting
+#ac_cv_path_RPCGEN=
+#ac_cv_path_XSLTPROC=
+#ac_cv_path_RADVD=
+#ac_cv_path_UDEVSETTLE=
+#ac_cv_path_EBTABLES_PATH=
+#ac_cv_path_PKG_CONFIG=
+#ac_cv_path_ac_pt_PKG_CONFIG
+#ac_cv_path_PKCHECK_PATH=
+#ac_cv_path_POLKIT_AUTH=
+#ac_cv_path_DTRACE=
+#ac_cv_path_ISCSIADM=
+#ac_cv_path_MSGFMT=
+#ac_cv_path_GMSGFMT=
+#ac_cv_path_XGETTEXT=
+#ac_cv_path_MSGMERGE=
+#ac_cv_path_SCRUB=
+#ac_cv_path_PYTHON=
+
+ALLOW_EMPTY_${PN} = "1"
+
+PACKAGES =+ "${PN}-libvirtd ${PN}-virsh"
+
+FILES_${PN}-libvirtd = "${sysconfdir}/init.d \
+	${sysconfdir}/sysctl.d \
+	${sysconfdir}/logrotate.d \
+	${sysconfdir}/libvirt/libvirtd.conf \
+	${sbindir}/libvirtd"
+
+FILES_${PN}-virsh = "${bindir}/virsh"
+
+INITSCRIPT_PACKAGES = "${PN}-libvirtd"
+INITSCRIPT_NAME_${PN}-libvirtd = "libvirtd"
+INITSCRIPT_PARAMS_${PN}-libvirtd = "defaults 72"
+
+# Disable the Python tool support
+#EXTRA_OECONF += " --with-python=no"
+# Enable the Python tool support
+require libvirt-python.inc
+
+do_install_append() {
+	install -d ${D}/etc/init.d
+	install -d ${D}/etc/libvirt
+
+	install -m 0755 ${WORKDIR}/libvirtd.sh ${D}/etc/init.d/libvirtd
+	install -m 0644 ${WORKDIR}/libvirtd.conf ${D}/etc/libvirt/libvirtd.conf
+}