We should tell configure where dmidecode is rather than
have it search the host for it.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
An error occurs during the install step of libvirt when the variable
PACKAGECONFIG does not contain qemu.
Indeed, in this case, the operation "chown -R qemu:qemu
${D}/${localstatedir}/lib/libvirt/qemu" fails, since the folder
${D}/${localstatedir}/lib/libvirt/qemu has not been created.
The fix consist in doing this operation only if
the variable “PACKAGECONFIG” contains “qemu”.
remark: issue present since the Warrior release of yocto.
Upstream-Status: Pending
Signed-off-by: Nicolas Lavocat <nicolas.lavocat@harman.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Minor update bringing in new features, improvements
and bug fixes.
Most notable changes:
- vbox: removed support for version 5.0 and 5.1 APIs
- vbox: added support for version 6.0 and 6.1 APIs
- qemu: Various embed driver fixes
- qemu: Add virtiofs support
- qemu: support disabling hotplug/unplug of PCIe devices
- xen: Add support for 'passthrough' hypervisor feature
Straightforward uprev, requiring patch refreshes to
remove fuzz.
Build and runtime behaviour is identical to older
version v6.1.0.
ptest summary:
===================================
Testsuite summary for libvirt 6.3.0
===================================
- TOTAL: 129
- PASS: 123
- SKIP: 1
- XFAIL: 0
- FAIL: 5
- XPASS: 0
- ERROR: 0
Failed test:
- virschematest
- domaincapstest
- qemuxml2argvtest
- qemuhotplugtest
- virsh-auth
Signed-off-by: Sakib Sajal <sakib.sajal@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
virt-login-shell asks for setuid permission as follow.
"virt-login-shell: must be run as setuid root"
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
While enabling multilib on qemumips64, lib32 assembler ends up
crashing on target sometimes due to branch out of range,
therefore using -O2 for now
[snip]
|../../libvirt-6.1.0/tests/qemuxml2argvtest.c: In function 'mymain':
|../../libvirt-6.1.0/tests/qemuxml2argvtest.c:608:1: note: variable
tracking size limit exceeded with '-fvar-tracking-assignments', retrying without
| 608 | mymain(void)
| | ^~~~~~
|/tmp/ccXJSwZR.s: Assembler messages:
|/tmp/ccXJSwZR.s:43943: Error: branch out of range
[snip]
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Updating libvirt to the next major release series. With this, brings
some changes to the build:
- add python3-docutils-native to DEPENDS, since it is needed for doc
building
- remove a reference to libgnu.la from the Makefiles, since it is not
needed or provided in the build dependencies
- remove obselete packageconfig options: xenapi and phyp
- add an explicit do_compile rule (versus the autotools bbclass
variant), so we can create some directories before compilation
starts
- add ${B}/src to the PKG_CONFIG_PATH to the libvirt.pc file can be
found during build, as it is queried by libvirt-python
- with the ability to find the libvirt.pc file, we can also drop the
manipulations for libvirt_api_xml_path, as it is returned from
pkg-config queries.
- clear PKG_CONFIG_SYSROOT_DIR during libvirt-python builds, since
the libvirt.pc file already provides cflags/includes that are
contained to the build/src directory structure.
And finally, existing patches are refreshed to remove fuzz.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
python2 has been removed from oe-core, convert the scripts
to python3 to avoid runtime error like:
/usr/bin/env: 'python': No such file or directory'
Signed-off-by: Changqing Li <changqing.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
pod2man is now provided by perlnative instead host.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Build libvirt results in the follow warning:
ERROR: libvirt-5.5.0-r0 do_package: libvirt-ptest: Multiple shlib providers for libvirt-admin.so.0: libvirt, libvirt-ptest
(used by files: ./tmp/work/aarch64-overc-linux/libvirt/5.5.0-r0/packages-split/libvirt-ptest/usr/lib/libvirt/ptest/tools/virt-admin)
ERROR: libvirt-5.5.0-r0 do_package: libvirt: Multiple shlib providers for libvirt-admin.so.0: libvirt, libvirt-ptest
(used by files: ./tmp/work/aarch64-overc-linux/libvirt/5.5.0-r0/packages-split/libvirt/usr/bin/virt-admin)
This is caused by the introduction of a shlib provider check added to
openembedded-core (commit 61c413690034 [package: Multiple
shlib_providers for the same file should error]). You can see the
issue and solution discussed more here
https://bugzilla.yoctoproject.org/show_bug.cgi?id=4628
Since the ptest version of the shared library will only be used by the
ptest package so we can use PRIVATE_LIBS to have the shlib providers
list.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
b5b5def ("libvirt: add hook support") introduces a wrong check against KARCH
which is not defined.
This patch use TARGET_ARCH overrides to remove numactl from PACKAGECONFIG for
32-bit arm arches.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
qemu does not support mips and mips64 and thus /var/lib/libvirt/qemu is not
generated. Do not change it.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
tls is the default network connection mode of libvirtd upstream, though we use
tcp mode as default.
tls requires necessary keys and certificates of certificate authority, server
and client to be properly generated and deployed. Otherwise servers and clients
cannot be connected.
This patch,
- integrates sample keys and certificats of certificate authority, server and
client for users to be able to use tls mode out of box.
- sets default server IP address to 127.0.0.1 for users to use local client out
of box.
- integrates certtool and provides gnutls-help.py for users to generate keys
and certificates on targets in their own ways.
- adds a PACKAGECONFIG option "gnutls" to control all of the above integration
but disables it to keep the same default behavior as before.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
At first, the polkit support is always enabled in
PACKAGECONFIG and since Feb 27 2014, use x11
DISTRO_FEATURES to control the polkit support
with below commit.
=========================================================
commit ce991a62d5
Author: Jonas Eriksson <jonas.eriksson@enea.com>
Date: Thu Feb 27 17:10:09 2014 +0100
libvirt: Disable polkit driver when there is no x11
To avoid having the default build of libvirt depend on virtual/x11
through polkit and consolekit, check for x11 in DISTRO_FEATURES before
enabling the polkit support in the default PKG_CONFIG.
Signed-off-by: Jonas Eriksson <jonas.eriksson@enea.com>
Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
diff --git a/recipes-extended/libvirt/libvirt_1.2.1.bb b/recipes-extended/libvirt/libvirt_1.2.1.bb
index 5365b8d..4c9cf36 100644
--- a/recipes-extended/libvirt/libvirt_1.2.1.bb
+++ b/recipes-extended/libvirt/libvirt_1.2.1.bb
@@ -109,10 +109,11 @@ INITSCRIPT_PARAMS_${PN}-libvirtd = "defaults 72"
#PACKAGECONFIG ??= "xen libxl xen-inotify test remote libvirtd"
# full config
-PACKAGECONFIG ??= "qemu yajl uml openvz vmware vbox esx iproute2 polkit lxc test \
+PACKAGECONFIG ??= "qemu yajl uml openvz vmware vbox esx iproute2 lxc test \
remote macvtap libvirtd netcf udev python ebtables \
${@base_contains('DISTRO_FEATURES', 'selinux', 'selinux', '', d)} \
${@base_contains('DISTRO_FEATURES', 'xen', 'xen libxl xen-inotify', '', d)} \
+ ${@base_contains('DISTRO_FEATURES', 'x11', 'polkit', '', d)} \
"
=========================================================
After below commits to add polkit as a required distro feature
in meta-oe, we should unify altogether to enable polkit if
polkit distro feature is set.
97a1a55 polkit: add polkit as a required distro
feature c049e02 polkit: inherit distro_features_check
Signed-off-by: Mingli Yu <Mingli.Yu@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Upgrading to 5.5.x for libvirt.
One pach refresh is required, but otherwise, build and runtime behaviour
is identical to 5.3.x.
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
1. remove the uml configure option because new version libvirt drop it
2. rebase three patches for new source codes
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
If we build libvirt with mips64 arch will fail that was not compatible with,
so place the qemu configure options to PACKAGECONFIG, let the PACKAGECONFIG
control the build options.
qemu is in the default PACKAGECONFIG, so we are not changing the build
for non-mips architectures.
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
1. Add a hook support script for libvirt
Add daemon, qemu, lxc and network script when the correspond to
libvirt daemon, qemu guest, lxc guest and network started or stoped,
based on:
https://libvirt.org/hooks.html
2. Add a qemu user and a qemu group and a kvm group
Signed-off-by: Dengke Du <dengke.du@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
"libxl" package does not exist, use Xen.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
Minor update bringing in new features such as better support for
cgroup v2, vfio AP support, support for XEN suspend/wakeup.
Basic usecases pass and the ptest return similar results we have been
achieving with the last few uprevs:
====================================
Testsuite summary for libvirt 4.9.0
====================================
# TOTAL: 120
# PASS: 117
# SKIP: 0
# XFAIL: 0
# FAIL: 3
# XPASS: 0
# ERROR: 0
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
PACKAGECONFIG 'qemu' causes libvirt depends on package qemu. But qemu
is not compatible with mips n32 and n64. So remove 'qemu' from
PACKAGECONFIG for mips n32 and n64.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The postinstall invokes `/etc/init.d/populate-volatile.sh update'.
This is only useful for an on-target package upgrade. For now,
this postinstall in libvirt has already got a check against $D to
tell whether it's running on target or not, we do not need to use
pkg_postinstall_ontarget. Otherwise, we get unnecessary postinstall
deferred to first boot, which is not what we want.
Note that the postinstall was originally written as 'pkg_postinstall_${PN}',
but was incorrectly modified to be 'pkg_postinstall_ontarget_${PN}' by the
following commit.
"""
commit 1e67a44db7
Author: He Zhe <zhe.he@windriver.com>
Date: Tue Jul 24 05:50:01 2018 -0700
libvirt: Remove unsupported configure options and fix warning
[snip]
"""
I think the warning about deferred postinstall was caused by some bbappend
file instead of the main recipe in this layer.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This fix will most likely be part of libvirt 4.8.0 but since we took
the time to investigate and fix this issue we are including it now to
prevent others from hitting this issue.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
A straight-forward uprev to the latest stable release. As usual basic
runtime sanity tests have been run along with the ptests. The
following is the results of the ptests:
====================================
Testsuite summary for libvirt 4.7.0
====================================
# TOTAL: 120
# PASS: 117
# SKIP: 0
# XFAIL: 0
# FAIL: 3
# XPASS: 0
# ERROR: 0
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Although v4.6.0 was just recently released we do not want to jump to
it due to:
https://bugzilla.redhat.com/show_bug.cgi?id=1614569
Unfortunately the mess around the above defect basically renders that
release useless. We will need to keep an eye for either a v4.7.0 or
grab updates off of the 'v4.5-maint' over the coming weeks.
As usual I have tested using qemu and lxc usecases (define, boot and
'virsh console' onto a guest). The ptests results match those of
v4.3.0:
======================================
Testsuite summary for libvirt 4.5.0
======================================
# TOTAL: 119
# PASS: 114
# SKIP: 0
# XFAIL: 0
# FAIL: 5
# XPASS: 0
# ERROR: 0
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Oddly something seems to have changed since I did the uprev of libvirt
to v4.3.0. Previously using the 'run-ptests' script would only run the
tests and not attempt to build them first. In preparation for the
uprev to v4.5.0 I attempted to run the tests and found that they would
fail to run and instead the tests were attempting to be built. I
suspect this change is caused by an uprev of autotools and the
handling of the 'TESTS' built-in.
To prevent this we are explicitly using the '--with-test-suite'
configure option and this return the previously observed behavior,
where the tests are simply run and not built.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
If our project is in a directory with a pathname of longer than
about 125 characters, configuration will fail with an "Argument
list too long" error. This patch uses the technique that was applied
to the coreutils recipe.
Signed-off-by: Joe Slater <joe.slater@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
xen and xen-inotify have been removed from upstream. We change
PACKAGECONFIG accordingly.
pkg_postinst has been deprecated, use pkg_postinst_ontarget instead.
WARNING: do_rootfs: Intentionally failing postinstall scriptlets of
['libvirt'] to defer them to first boot is deprecated. Please place
them into pkg_postinst_ontarget_${PN} ().
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
There is host contamination in that we force XMLLINT to be
'/usr/bin/xmllint' via ac_cv_path_XMLLINT. This results in the error:
/bin/bash: /usr/bin/xmllint: No such file or directory
We only use XMLLINT during the build, it is present in two Makefiles
included with ptest package but they are unused. So we drop the
setting of ac_cv_path_XMLLINT to ensure we are using xmllint in the
recipe sysroot instead of the host's. Should the ptest package ever
evolve to make use of the Makefiles we need to update not only the
XMLLINT path but that for XSLTPROC and others too. (I would suggest
that the Makefiles may have been used on the target as part of ptest
at one point, but are no longer and should be removed, though I
haven't investigated further).
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
We have been using the 1.3.x release series for a long time now which
has been great for stability but is slowly becoming harder and harder
to track and port bug and CVE fixes. This is a big jump to the latest
upstream release which gives us access to a myriad of fixes as well as
puts us in a better position to contribute to the upstream project
when issues are found.
Several patches have been dropped as they are either no longer valid
against this release or have equivalent updates already applied to the
upstream project. Some patches were consolidated which should ease
future uprevs of this recipe. The majority of the updates were related
to ptest patches, which is not a huge surprise given this code has no
upstream equivalent.
The overall runtime behavior remains much the same from v1.3.5 with
the only notable configuration change being for 'seccomp_sandbox'
which has been disabled here but should possibly be revisited in the
near future.
As usual the normal runtime usecases for qemu/kvm and lxc have been
run successfully along with ptest results which are by and large OK:
====================================
Testsuite summary for libvirt 4.3.0
====================================
# TOTAL: 119
# PASS: 115
# SKIP: 0
# XFAIL: 0
# FAIL: 4
# XPASS: 0
# ERROR: 0
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
With Sun RPC Interfaces removed from libc we need to use an external
provider for rpc. Polling other distros there seems to be consensus to
use libtirpc so we follow this trend.
Unfortunately this should only require the DEPENDS addition to the
recipe but the upstream project has a few flaws in their Makefiles and
configure which we need to work around so we add 2 new patches to
address these to allow for the use of a sysroot and to use the
$XDR_CFLAGS in a few more places.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
A while ago changes were merged to meta-openembedded to make
/etc/dnsmasq.d (and specifically the files it contains) referenced
when the main instance of dnsmasq is run (see dnsmasq.service and
commit ba665493a0dd [dnsmasq: allow for dnsmasq instances to reuse
default dnsmasq.conf]).
We, however, continued to modify the global configuration
(/etc/dnsmasq.conf) to keep the main instance of dnsmasq from
attaching to virbr0 and lxcbr0, by using 'bind-dynamic'. This approach
is problematic, since it is common that other instances of dnsmasq
will make use of the global configuration file and may have
incompatible options. We see this for example when attempting to start
lxc-net which will attempt to use 'bind-interface' which is
incompatible with 'bind-dynamic' that we were adding to the global
configuration.
Here we remove our change to the global configuration (leaving it
mostly empty as it should be) and instead have lxc and libvirt
packages instruct the global instance not to bind to virbr0 and lxcbr0
by adding configuration files to /etc/dnsmasq.d (setting
except-interface).
The added benefit to this approach is that if lxc or libvirt are not
part of an image the global configuration will not be modified in such
a way as to expect that they are present.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The build is failing due to a failing QA check:
ERROR: libvirt-1.3.5-r0 do_package_qa: QA Issue: /usr/lib/libvirt/ptest/tests/tests/check-file-access.pl
contained in package libvirt-ptest requires /usr/bin/perl,
but no providers found in RDEPENDS_libvirt-ptest? [file-rdeps]
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Commit 8709d4504c35817ef1d7181b47ba96c3ca0c949e [lvm2: separate
libdevmapper to avoid circular dependency] in meta-oe meant that our
build would fail with
checking for libdevmapper.h... no
configure: error: You must install device-mapper-devel/libdevmapper >= 1.0.0 to compile libvirt
Add the required DEPENDS for libdevmapper to get the build working as
it did prior to this meta-oe change.
NOTE: our previous dependency on lvm2 was not only to get libdevmapper
functionality, so lvm2 remains a valid DEPENDS, so is left in place.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The DIRFILES variable was a temporary workaround to resolve a do_rootfs
RPM package conflict between libvirt and polkit.
This happened because of the different permissions and ownership that the
packages placed on ${datadir}/usr/share/polkit-1/rules.d.
The behaviour is now conditional based on how PACKAGECONFIG is set. The
polkit rules will be removed from the package if polkit is not enabled.
If polkit is enabled the permissions and ownership are set to match those
set by the polkit recipe.
This uses the useradd enhancements for RSS. It requires that shadow-native
be included as a DEPENDS to provide the useradd command in the native
sysroot.
Signed-off-by: Rob Woolley <rob.woolley@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The switch to RPM4 and dnf results in this error during rootfs construction:
Error: Transaction check error:
file /usr/share/polkit-1/rules.d conflicts between attempted installs of libvirt-1.3.5-r0.13.core2_64 and polkit-0.113-r0.9.core2_64
We can temporarily work around it by instructing RPM to not package/process
the dirfiles.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The patch fix the following QA warning:
--
WARNING: QA Issue: libvirt rdepends on libacl, but it isn't a build dependency? [build-deps]
Signed-off-by: Zhenbo Gao <zhenbo.gao@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Systemd untis should be placed as per ${systemd_system_unitdir}.
Patched the source code to support configure variable to set the systemd units
directory.
Signed-off-by: Amarnath Valluri <amarnath.valluri@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
getVar() now defaults to expanding by default.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
libvirt by default has '--with-wireshark-dissector' set to
'check'. Therefor if wireshark is built before vs after libvirt this
will result in a potentially unexpected difference in how libvirt is
configured. Additionally the build of libvirt with wireshark
capabilities enabled is currently broken and thus if attempted will
result in the error:
fatal error: ws_symbol_export.h: No such file or directory
To prevent the random configuration of libvirt with respect to
wireshark we add a new packageconfig for wireshark.
NOTE that the wireshark recipe is currently incomplete so this new
packageconfig will result in a build failure if used, until wireshark
is updated to build libwsutil.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
When do split_and_strip_files, it may calls debugedit to deal elf files.
For ptest sub-package, it fails to run debugedit with .o files. So remove
the .o files which are redundant to run ptest cases.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add missing test helpers
We don't support windows encoding so remove that case
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Apparently if a license is listed for a package it must be included in
the overall LICENSE variable otherwise you will get WARNINGS such as:
WARNING: LICENSE_libvirt-ptest includes licenses (LGPLv2.1 GPLv2+)
that are not listed in LICENSE
We ensure that the license string is consistent between the LICENSE
variable and the subpackage license string to remove this
warning. Since '2+' is a superset of '2', ie. "version 2 or later",
and actually is more reflective of the text found on the file headers
and such we use GPLv2+ and LGPLv2.1+.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When build for architecture that don't use gcc atomic ops but pthread,
it fails to build for arm:
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virClassNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:153: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:205: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectUnref':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:277: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectRef':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:298: undefined reference to `virAtomicLock'
| collect2: error: ld returned 1 exit status
It is similar with:
http://libvirt.org/git/?p=libvirt.git;a=commit;h=12dc729
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
