fixes:
WARNING: linux-yocto-4.18.21+gitAUTOINC+9e348b6f9d_db2d813869-r0
do_kernel_configcheck: [kernel config]: This BSP sets config
options that are not offered anywhere within this kernel:
CONFIG_EXT3_FS_XATTR
CONFIG_RESOURCE_COUNTERS
CONFIG_CGROUP_MEM_RES_CTLR
CONFIG_CLS_CGROUP
CONFIG_NETPRIO_CGROUP
CONFIG_DEVPTS_MULTIPLE_INSTANCES
Configs were either dropped or renamed according to the updates made
in the kernel, as capture below.
CONFIG_RESOURCE_COUNTERS gone since kernel v3.19 via mainline
commit 5b1efc027c0b51ca3e76f4e00c83358f8349f543.
CONFIG_CGROUP_MEM_RES_CTLR renamed since kernel v3.6 via mainline
commit c255a458055e459f65eb7b7f51dc5dbdd0caf1d8
CONFIG_CLS_CGROUP never existed AFAICT it should have always
been CONFIG_NET_CLS_CGROUP
CONFIG_NETPRIO_CGROUP renamed since kernel v3.14 via mainline
commit 86f8515f9721fa171483f0fe0391968fbb949cc9
CONFIG_DEVPTS_MULTIPLE_INSTANCES removed since kernel v4.7 via mainline
commit eedf265aa003b4781de24cfed40a655a664457e6
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Instead of setting virtio kernel configs in LXC fragment, just reuse
cfg/virtio.scc from yocto-kernel-cache.
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The script lxc-checkconfig doesn't seem to report virtio related kernel
configs as required, so remove them from lxc.cfg instead.
Signed-off-by: Chin Huat Ang <chin.huat.ang@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
In the v4.18 kernel, there is a problem with the locking and init sequence of
the kernel modules. This would cause nf_conntrack_ipv6 failed to be loaded.
In kernel v4.19, nf_conntrack_ipv6 has been merged to nf_conntrack and the
problematic code has gone. This patch just works around by forcedly loading
nf_conntrack_ipv6.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
systemd-modules-load.service bindly load whatever in modules-load.d/*.conf,
in this case, kvm_intel and kvm_amd. One of them must fail on a specific
board and causes the following failure.
This patches remove them from KERNEL_MODULE_AUTOLOAD and leaves them to udev.
systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
Failed to start Load Kernel Modules.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Setting 'CONFIG_NET_ACT_POLICE=m' meets demands of Qos,one of features of openswitch.
This is a new police-mechanism called action-extension.
It can build act_police.c into kernel as type of module.
If you want to do traffic policing, a kind of action-extension, i.e. strict bandwidth limiting.
This action replaces the existing policing module.
User can set action-extension at userspace by tool of openvswitch
If user set action-extension, exts->actions[i] will be called, and finally tcf_police()
defined at act_police.c will be called.
Signed-off-by: Hongzhi.Song <hongzhi.song@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Make these bbappend files to take effect only when DISTRO_FEATURES
contain 'virtualization'. Otherwise, we would meet failure failure
at system booting up qemux86. Related logs are as below.
systemd-modules-load[113]: Failed to insert 'kvm_amd': Operation not supported
systemd-modules-load[113]: Failed to insert 'kvm_intel': Operation not supported
Also, make kvm related settings depend on the 'kvm' distro feature.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Meanwhile, this became boolean, and trying to make it a module just
leaves it off.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Importing the docker configuratino fragment from meta-overc, which
adds options and capabilities to allow container to start out of
the box.
Note: There are more options that could be added here, but many of
them are decision of the distro and depend on runtime configuration
choices. So to balance the size of the build and leave decisions
where they belong, we keep this as small as possible.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Docker needs ths _NETFILTER_XT_MATCH_ADDRTYPE module in order to start
up successfully. This patch adds it to the supported kernels.
Signed-off-by: brian avery <brian.avery@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The 'base_contains' is now deprecated and only kept as a compatibility method. It will be removed in future releases.
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
4.4 is available in oe-core, and will be built by default in many
configurations. That leaves us either needing to force the preferred
version or copy our config to 4.4.
This is a direct clone of the 4.1 config to 4.4, and is currently
untested, but forms a baseline for more updates.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
- Drop old kernel options and add some newly available ones.
Signed-off-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
Updating the bbappends for the kernel to match the latest oe-core/yocto
1.7 versions. We drop 3.4, since it is no longer supported and add a
3.17 bbappend.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
In the updates to the new KERNEL_MODULE_AUTOLOAD format, openvswitch was
missed.
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
commit kernel-module-split: Add support for KERNEL_MODULE_AUTOLOAD and KERNEL_MODULE_PROBECONF
in oe-core replaces module_autoload with KERNEL_MODULE_AUTOLOAD, so we must update
the linux-yocto bbappends.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Now that the 3.14 kernel has been introduced and 3.8 dropped from oe-core,
we need to adjust our configuration fragments accordingly.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updated linux kernel fragment to match defaults as defined in the 3.10 kernel's Kconfig files. If defaults were not specified, modules were were used unless required by another built-in option. As such, The core frontend drivers are included by default and the backend drivers are built as modules.
This allows privileged, PV, HVM, and PVHVM guests to work properly without additional kernel configuration or modules required in initramfs (from a Xen support perspective).
This also removes CONFIG_KVM_GUEST which was erroneously included previously.
Signed-off-by: Chris Patterson <cjp256@gmail.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When I define the bridge, I get below error
root@intel_5500_server:~# ovs-vsctl add-br ovsbr0
Jan 25 17:34:07|00002|stream_unix|ERR|/tmp/stream-unix.1487.0: connection to /var/run/openvswitch/db.sock
failed: No such file or directory
........
........
This is because openvswitch damon isn't running,so we'd better start it at
the boot time. The split-package ${PN}-switch ${PN}-controller provide us
to start necessary daemon with update-rc.d so we add them to the RDEPENDS.
Since openvswitch depends on openvswtich kernel module, so auto load the
kernel module too.
Signed-off-by: Lei Yang <lei.yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
