The rule in the recipe which deletes all but LICENSE and the digest
directory is broken depending on what ascii table bash uses by
default for matching, specifically:
rm -rf ${S}/[A-KM-Za-ce-z]* ${S}/doc*
The "A-K" piece will actually match both upper and lower case when the
acsii because the ascii value is checked as being between two numbers:
0x41=a, 0x42=A,0x43=b...0x48=D
This is contray to what you would typically think should work with the
lower and uppers separated into two contiguous spaces. To fix this,
instead of using the "rm" logic, we can copy the components we need
instead.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add missing test helpers
We don't support windows encoding so remove that case
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The file locations listed in the recipes for protobuf, protobuf-c
are not currently available. Updating the recipe to
1. Point URI's to valid locations.
2. Update checksums and increment version numbers.
Signed-off-by: Venkateswara Rao Mandela <venkat.mandela@ti.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The python-newrelic package is licensed under several licenses,
including the customer NewRelic license. This has been properly
captured in the LICENSE string in the recipe but since there is no
copy of the license it isn't copied into the package's build
license-destdir which results in the following warning:
WARNING: core-image-minimal-1.0-r0 do_rootfs: The license listed
NewRelic was not in the licenses collected for recipe python-newrelic
Add a copy of the license to the layer's custom-licenses folder to
resolve this warning. The license text comes verbatim from the
upstream LICENSE file.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This is a small package so despite the large version jump the changes
are minor, mostly bug fixes and some work around systemd.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Seems upstream adjusted their LICENSE file. The license is still
Apache version 2 so no worries about having to update the LICENSE
string for the recipe.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Systemd takes care of setting up the various cgroup mounts at boot,
and likewise the tearing down of these at shutdown. It is therefor a
useless dependency when we are using systemd.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Apparently if a license is listed for a package it must be included in
the overall LICENSE variable otherwise you will get WARNINGS such as:
WARNING: LICENSE_libvirt-ptest includes licenses (LGPLv2.1 GPLv2+)
that are not listed in LICENSE
We ensure that the license string is consistent between the LICENSE
variable and the subpackage license string to remove this
warning. Since '2+' is a superset of '2', ie. "version 2 or later",
and actually is more reflective of the text found on the file headers
and such we use GPLv2+ and LGPLv2.1+.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When build for architecture that don't use gcc atomic ops but pthread,
it fails to build for arm:
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virClassNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:153: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectNew':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:205: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectUnref':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:277: undefined reference to `virAtomicLock'
| ../tools/nss/.libs/libnss_libvirt_impl.a(libvirt_nss_la-virobject.o): In function `virObjectRef':
| /buildarea2/kkang/builds/qemuarm-Aug03/bitbake_build/tmp/work/armv5e-wrs-linux-gnueabi/libvirt/1.3.5-r0/build/src/../../libvirt-1.3.5/src/util/virobject.c:298: undefined reference to `virAtomicLock'
| collect2: error: ld returned 1 exit status
It is similar with:
http://libvirt.org/git/?p=libvirt.git;a=commit;h=12dc729
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upgrade libvirt from 1.3.2 to 1.3.5.
* update checksums and remove PR
* remove trailing whitespace
* remove backport patch 0001-fix-crash-in-getAllDomainStats.patch
* update context of patches
* remove libvirtd.socket from SYSTEMD_SERVICE which doesn't exist anymore
* install test data which ptest requires
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
Currently libvirt python builds in the multilib case, but fails to
install. Switch from PN to BPN, and fix compile to be consistent.
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
- update packages and add additional ones for new binaries
(cpuid and livepatch)
- update xen_git to point to 4.7, make branch= fully variable,
and remove assumed .0 from release version
- add patch to fix compilation of xen with gcc 6 on arm/aarch64
Build tested x86_64 and aarch64 targets.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
openvzutilstest.conf file is needed by openvzutilstest test
Signed-off-by: Catalin Enache <catalin.enache@windriver.com>
Signed-off-by: Bruce Ashfield <bruce@zedd.org>
Bumping the version of docker and dependencies. This gets us closer to
runc 1.0, which is the foundation for future OCI efforts.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The docker build isn't properly using CFLAGS/LDFLAGS, which triggers the following
QA error:
ERROR: docker-1.11.1+git5604cbed50d51c4039b1abcb1cf87c4e01bce924-r0 do_package_qa: QA Issue: No GNU_HASH in the elf binary: 'docker/1.11.1+git5604cbed50d51c4039b1abcb1cf87c4e01bce924-r0/packages-split/docker/usr/bin/docker' [ldflags]
ERROR: docker-1.11.1+git5604cbed50d51c4039b1abcb1cf87c4e01bce924-r0 do_package_qa: QA run found fatal errors. Please consider fixing them
ERROR: docker-1.11.1+git5604cbed50d51c4039b1abcb1cf87c4e01bce924-r0 do_package_qa: Function failed: do_package_qa
ERROR: Logfile of failure stored in: tmp/work/core2-64-overc-linux/docker/1.11.1+git5604cbed50d51c4039b1abcb1cf87c4e01bce924-r0/temp/log.do_package_qa.63906
ERROR: Task meta-virtualization/recipes-containers/docker/docker_git.bb:do_package_qa (meta-virtualization/recipes-containers/docker/docker_git.bb:do_package_qa) failed with exit code '1'
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
* Upgrade iasl from 20120215 to 20160527
* Fix the dependency as it actually depends on
bison-native and flex-native
* Remove hardcode PR to let PR server handle
the version
* Add (x86_64.*|i.86.*)-linux to COMPATIBLE_HOST
* Add patch Make-CC-definition-conditional.patch
to make CC definition conditional as it makes
the package unable to cross-compile when hardcode
CC's definition previously.
* Add iasl command manual file as iasl.1
Signed-off-by: Mingli Yu <mingli.yu@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
If the lxc is compiled with gcc 5.2 -O2 optimization on arm,
lxc-console/lxc-stop command always produce segment fault.
The same issue also occurred on systemd: [YOCTO #8291]
For lxc, after several testing, it only needs to disable
schedule-insns2 to fix the segment fault issue.
Signed-off-by: fli <fupan.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This approach breaks images which have Xen in DISTRO_FEATURES,
but are not booting under Xen (and mounting /proc/xen fails).
xencommons, xendriverdomain, or proc-xen.mount should take care of
mounting /proc/xen.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
netns is a runc hook for setting up simple bridge networking within containers.
See README.md (or https://github.com/jfrazelle/netns/blob/master/README.md) for
instructions on how to use netns.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
When building for qemux86 the following error was encountered due to GOARCH
being set incorrectly:
compile: unknown architecture "i586"
This can be fixed by using the go-osarchmap class.
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Some recipes in RDEPENDS are installing specific version of package, for
example:
gunicorn (= 19.1.1)
If usigin ipk for PACKAGE_CLASSES, opkg prints error:
Collected errors:
* satisfy_dependencies_for: Cannot satisfy the following dependencies
for docker:
* gunicorn (= 19.1.1) *
* opkg_install: Cannot install package docker.
This error is caused because opkg appends package revision to version.
In this case:
gunicorn_19.1.1-r0.1
If we use comparator >= this error doesn't appear.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
It shows warning when build crius if libselinux has been built already:
WARNING: QA Issue: criu rdepends on libselinux, but it isn't a build dependency? [build-deps]
Add a patch to disable selinux support when 'selinux' is not in PACKAGECONF.
And update indentation at same time.
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Usually $GOROOT is set by go tool, but if sstate is specified, $GOROOT
is set to the path in the first project. If docker is built in the
another project(with same SSTATE_DIR) later, and the first project is removed,
the following error will be seen:
| go: cannot find GOROOT directory:
/path/to/previous/project/bitbake_build/tmp/sysroots/x86_64-linux/usr/lib/x86_64-wrs-linux/go
This commit is overriding $GOROOT stored in the go tool in sstate cache,
making sure it is set to the correct path in current project.
See more information here: https://golang.org/doc/install#install
Signed-off-by: Yunguo Wei <yunguo.wei@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The change [go-native: don't use host /var/tmp for temp build artifacts]
fixed builds, but it is possible that the tmp directory already exists, which
results in the following failure:
| DEBUG: Executing shell function do_compile
| mkdir: cannot create directory 'tmp/work/x86_64-linux/go-cross/1.6.2-r0/build-tmp': File exists
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at tmp/work/x86_64-linux/go-cross/1.6.2-r0/temp/log.do_compile.29142)
By adding a -p to the mkdir calls, we can survive this scenario.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This patch adds bash and python to ptest's RDEPENDS to avoid the following
warning:
"WARNING: QA Issue: /usr/lib64/protobuf/ptest/run-ptest_protobuf-ptest contained
in package protobuf-ptest requires /bin/bash, but no providers found in its
RDEPENDS [file-rdeps]"
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upstream libvirt Commits 1d39dbaf and 827ed9b4 broke the libvirt-python API
by removing virDomainRef() and virDomainFree(). virDomainStatsRecordListFree() will
free that domain pointer and later when virDomain (python object) call
its destructor and tries to free that same pointer again.
Signed-off-by: Roy Li <rongqing.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Protocol Buffers(a.k.a., protobuf) are language-neutral, platform-neutral,
extensible mechanism for serializing structured data, so it is reasonable
to be a part of development tool recipe.
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Since CRIU does not explicitly nominate the version of protobuf as 2.6.1, which
should not be included just here. And it seems protobuf-2.5.0 is doable or this
CRIU version based on a basic testing according to criu.org/Simple_loop as well,
so remove it from criu.
Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Similar to a recent change for go-cross we can potentially run in to a
build failure:
go tool dist: mkdtemp(/var/tmp/go-cbuild-A0rrP5): No such file or directory
when the host doesn't have a /var/tmp or when the permissions don't
allow for the creation of the temporary directory. Instead of relying
on /var/tmp we create and use a temporary directory in the $WORKDIR to
work around this issue. This is passed to the build via the TMPDIR
environment variable.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
We no longer need go-net and go-sqlite for the docker build and
runtime. The upstream repos are no longer properly fetching, so
we can simply drop the recipes and dependency.
If they are ever needed in the future, we can revisit the upstream
source for them.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Recent patch did deprecate a standard POSIX function [1].
This is the build error:
| ../../../lxc-2.0.0/src/lxc/cgfs.c: In function 'cgroup_rmdir':
| ../../../lxc-2.0.0/src/lxc/cgfs.c:172:2: error: 'readdir_r' is deprecated [-Werror=deprecated-declarations]
| while (!readdir_r(dir, &dirent, &direntp)) {
| ^
| In file included from ../../../lxc-2.0.0/src/lxc/cgfs.c:30:0:
| /.../build/tmp-glibc/sysroots/qemux86-64/usr/include/dirent.h:183:12: note: declared here
| extern int readdir_r (DIR *__restrict __dirp,
| ^
[1] https://www.sourceware.org/ml/libc-alpha/2016-02/msg00093.html
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
error: file /var/run from install of openvswitch-2.1.3-r0.x86_64
conflicts with file from package base-files-3.0.14-r89.ubinux_x86_64
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The default behavior for go-cross build is to use the path specified
in TMPDIR for some temporary build artifacts and if no TMPDIR is set
in the environment to fallback to use /var/tmp. This causes a build
failure on hosts that do not have a /var/tmp or that have restrictive
permissions on /var/tmp. The failure is seen as:
go tool dist: mkdtemp(/var/tmp/go-cbuild-yhmNbi): No such file or directory
By setting TMPDIR and ensuring we create this
directory we can avoid the associated issue with using the default.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The 'base_contains' is now deprecated and only kept as a compatibility method. It will be removed in future releases.
Signed-off-by: Derek Straka <derek@asterius.io>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This is fixing:
QA Issue: criu rdepends on libbsd, but it isn't a build dependency? [build-deps]
Signed-off-by: Yunguo Wei <yunguo.wei@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Updating docker to the 1.11.1 release, which uses the open container initiative
components.
With this udpate, we drop patches that are no longer required, and adjust the
install/strip routines to not look for obselete components.
There are now 4 binaries required for docker to work:
- docker
- docker-containerd
- docker-containerd-shim
- docker-runc
The new containerd and runc recipes provide the latter, while docker provides
the cli and daemon.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
With the update to docker 1.11.x, we must also introduce runc. From the
runc site:
runC is a CLI tool for spawning and running containers according to the OCP specification.
Containers are started as a child process of runC and can be embedded into various other
systems without having to run a Docker daemon.
runC is built on libcontainer, the same container technology powering millions of
Docker Engine installations.
Docker images can be run with runC.
So not only is runc required for docker, it is useful for any system that wants
to run OCP containers AND docker containers.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
With the update to docker 1.11.x+, we need the OCI containerd to control
runc:
containerd is a daemon to control runC, built for performance and density.
containerd leverages runC's advanced features such as seccomp and user
namespace support as well as checkpoint and restore for cloning and
live migration of containers.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Introduce the 1.6 go release, and port patches to apply to this version.
Existing versions (1.5) are not removed, so this is not a forced update.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
2.0.0 is released, and contains many of the patches we've been carrying for
1.x.
With this updated, we drop upstream backports (and submitted patches), and
refresh on patch. Otherwise, everything is the same.
Sanity tested on x86-64.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Recently the configure with python enabled has become the default here.
However, if the host doesn't have python3, configure fails with:
checking for a Python interpreter with version >= 3.2... none
configure: error: You must install python3
We have a python3 in the sysroot, but we need to inherit it for it to
be available for lxc's configure step.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add relocation fix as documented in contained commit log, so that we
can build with newer binutils, as per the ones we get via the self
hosted builder and things like build-appliance.
Fixes:
| go-native/1.4.3-r0/go/pkg/linux_amd64/runtime/cgo.a(_all.o): unknown relocation type 42; compiled without -fpic?
| go-native/1.4.3-r0/go/pkg/linux_amd64/runtime/cgo.a(_all.o): unknown relocation type 42; compiled without -fpic?
| runtime/cgo(.text): unexpected relocation type 298
| runtime/cgo(.text): unexpected relocation type 298
| # cmd/go
| go-native/1.4.3-r0/go/pkg/linux_amd64/runtime/cgo.a(_all.o): unknown relocation type 42; compiled without -fpic?
| go-native/1.4.3-r0/go/pkg/linux_amd64/runtime/cgo.a(_all.o): unknown relocation type 42; compiled without -fpic?
| runtime/cgo(.text): unexpected relocation type 298
| runtime/cgo(.text): unexpected relocation type 298
| WARNING: go-native/1.4.3-r0/temp/run.do_compile.30243:1 exit 2 from './make.bash --host-only'
| ERROR: Function failed: do_compile (log file is located at go-native/1.4.3-r0/temp/log.do_compile.30243)
ERROR: Task 6 (meta-virtualization/recipes-devtools/go-cross/go-native_1.4.bb, do_compile) failed with exit code '1'
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
There is a fix for newer binutils that was aimed at being placed
on the 1.4.3 baseline, so update accordingly.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cherry picked patch from lxc upstream commit:
f2e206ff47<lxc: let lxc-start support wlan phys>
to enable lxc-start command support wlan0 device
and make cube-essential support paththrough wlan
device from host to lxc containers.
Signed-off-by: fli <fupan.li@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Set PYTHON to TARGET_PYTHON for running on target
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
