Add PACKAGECONFIG for libcap-ng, and default to enable it.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add dpdk as a runtime dependency when 'dpdk' PACKAGECONFIG is enabled.
Also, introduce a variable DPDK_INSTALL_DIR, and default it to /opt/dpdk.
This is because users might install DPDK into different locations,
e.g. /usr. And it would easy for users to override this variable
to make openvswitch build with dpdk correctly.
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
While attempting to get ovs to be built and run with py3 (completely
free of py2) host contamination was found (builds on hosts without
python-six installed would fail). It was also determined that pyc
files were still being generated with py2 and not py3. This resulted
in more work being done to achieve the desired results. This work was
sent upstream and subsequently merged. Unfortunately this didn't make
v2.7.1 and may not be available until the next major release, so here
we backport these commits and adjust the recipe to get a clean py3
only build.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Released at the end of June 2017 this is a bugfix release with no
major functional changes. Surprisingly the patch for CVE-2017-9263 is
still not applied upstream so we continue to carry this change.
The remaining patches were audited and cleaned up as needed.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
As far as I can tell openvswitch has been updated to work with python3
as well as with python(2). Switch to depend on python3 and use python3
for associated scripts. For the most part openvswitch will bind at
runtime to either py2 or py3 regardless of these changes, with these
changes we just do a better job of setting up the dependencies to
facilitate py3 bindings. The openvswitch autotests results are mostly
identical before and after this switch (failures move from python3 to
python(2) test cases as expected, with some exceptions see below).
When running the autotests/ptest with python(2) vs python3 we see a
slightly higher failure rate (334 failures vs. 284 failures). I do not
believe this higher fail rate reflects actual errors in the runtime,
rather the tests are not adapted to python3. At any rate like the rest
of openvswitch it is fairly straightforward to hack the logic for
autotests to be run using py2 as long as it is available in the image,
so these changes don't prevent falling back to py2 for autotests. This
should facilitate any debugging we need to do based on us switching to
favor py3.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
On a minimally provisioned rootfs the tests are currently getting
'stuck' after running for a few minutes because 'find' and 'which' are
not being found. Add these to the ptest package RDEPENDS to ensure
they are present in the rootfs.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This version of OVS was released on Feb. 21. Bringing our recipe up to
date with the latest release ensure we have all the latest CVE fixes
as well as any new functionality that folks might be looking
for. Additionally we are better situated to support up to date
releases of DPDK (v16.11 in this case). No surprises with the uprev,
it passes all usecase tests (meta-overc) and ptest results are much
the same as the results we had in v2.6.1. While completing the uprev I
took the opportunity to do some cleanup of patches that were no longer
used or required.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
There is only a single PYTHON variable for configure and yet python is
used for the build as well as scripts installed on the target. If we
set a path in PYTHON as we had we end up using this same path during
the build and since it isn't to the sysroot we end up with host
contamination (as demonstrated by python failing to import 'six' on
build hosts without python-six installed.
The best approach is to set PYTHON to "python" when calling configure,
ie. without a path. This will use 'python' from the path during build
time and by ensuring all the installed scripts use '/usr/bin/env' we
can ensure python will be found on the target when the scripts are
run.
Since 'six' is used as part of the build we have to ensure it is
-native'ly buildable and we set all the required build and runtime
dependencies.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Pick up the latest features, including compatability with the latest
DPDK as well as bug fixes.
The patches for TARGET_PYTHON and TARGET_PERL can be dropped as
configure now lets us pass these in the env (which we set).
The systemd service files have been shuffled some upstream and we make
adjustments in the recipe to accomodate these. The sysvinit scripts
remain functional as they are.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Upstream commit a489b16854b5 [conntrack: New userspace connection
tracker.] classified new files under existing licenses in COPYING,
resulting in no change to the overall licenses but requires a new
checksum.
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
error: file /var/run from install of openvswitch-2.1.3-r0.x86_64
conflicts with file from package base-files-3.0.14-r89.ubinux_x86_64
Signed-off-by: Dai Caiyun <daicy.fnst@cn.fujitsu.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Set PYTHON to TARGET_PYTHON for running on target
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
- Copy certain files from srcdir since it has been different from
build directory.
- Copy more necessary files for new added test cases.
- Modify config files for running on target.
- Add necessary RDEPENDS
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.5.0)
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Uprev to git rev bb429e09f7783f1ba23ac0682ed9edf424f0cfbb (based on 2.4.0)
- Remove non_reproducible_builds_cleanup.patch since it
have been in the version 2.4.0.
Signed-off-by: Jianchuan Wang <jianchuan.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Like the previous versions of OVS, we rely on the virtual/kernel provider
to build the appropriate modules. Passing the --with-linux and --with-linux-source
breaks builds when the split source/build/build-artifacts are not as
expected (and modules are attempted to be built from the wrong directory).
To fix this, we simply don't enable those options, and all is well.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
The dpdk recipes are not commonly available, so we shouldn't have
dpdk in the PACKAGECONFIG by default.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Add openvswitch.inc, removing common parts out of openvswitch*.bb
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
This revision corresponds to git rev 1667bb34988358aaf1c92d0d21fad4b1c8698780
(based on 2.3.90)
Signed-off-by: Amy Fong <amy.fong@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
