These changes are the second edit pass for the new section.
There are some minor changes.
(From yocto-docs rev: 6c81617a2782d2f02d4900a68dd4e8c6eeb70fa1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits up through the BSP and Kernel overview sections. I also put
in place holder text and began on the application development over
section.
(From yocto-docs rev: 9c1b681ff253b469bffc355f0a938643997d85d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an example whose output exceeds the PDF manual version's
page width. I had to artificially break the line up.
(From yocto-docs rev: d8a5714a2f8193c1efc8a7080b8f6e0744da610a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the dev-manual-model.xml chapter for general improvements.
Also had to update the figure that shows the kernel development flow.
(From yocto-docs rev: 2aacccb03d167eac74a1b45c39a9edac160efc7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note indicating where you can find the maintainer for yocto
code. Suggestion by Robert Berger.
(From yocto-docs rev: 8e55cc4c460582964b0267b4f43c14e7100f17fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
somehow I lost three or four changes that are credited to Robert
Berger (Community Member). I have re-introduced them here.
(From yocto-docs rev: a23564ada0e072bea63739aeb1eb5c66d595e728)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided a link to the OpenEmbedded wiki page created by Mark Hatle
that provides good guidelines on how to create well-formed commit
messages.
(From yocto-docs rev: ea7b0100a7b45c369cb67daa0705dcc5acef40c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General pass-through for consistency in referencing sections.
Also, added Darren Hart's review comments for the "Submitting a
Change" section. I added more about the mailing lists and how to
submit a proper commit message.
(From yocto-docs rev: d9c8f5db8c862b1be724915cc43da6d12b88b97d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the mailing lists to be more specific and to be formatted
differently.
(From yocto-docs rev: 50b5cf2d331b120cfa9de0ba77ea1da1240d42e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied consistent section referencing formats. Also cleaned up some
terminolgy for the YP Git repo.
(From yocto-docs rev: fa3cbb835b61158357d3f6fb9ebe017b9ba405cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some indentations applied. Also, a few minor changes to some
wordings.
(From yocto-docs rev: a166f41a5bbf3590d8a2fabbee267bdd190f19dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed to reference the image differently for the pre-built section.
(From yocto-docs rev: 10568a0a8c4160af995089e481ccc2772e81d805)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a final scrub of the manual. I updated all examples and links
to be current for what I think will be the 1.1 release. I also added
some cross-referencing into the YP dev manual that now exist.
(From yocto-docs rev: 4c10b0e04856817a1d03aee7a9ed6e4d5d73a3ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes reflect corrections resulting from Jessica Zhang's review
of the sections.
(From yocto-docs rev: c3fed39bc3909c38424e7e72c40471dcb0053c8d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After working through this stuff I was still confused as to how to
guide the user toward proper toolchain installation and on what they
needed to do for collecting their kernel and filesystem images.
These changes included some information on when and how to extract
the rootfs when the user is booting to NFS. Plus some other
general items like the significance of meta-toolchain-sdk as
compared to meta-toolchain.
(From yocto-docs rev: 2cc88b5193888a074ffd87cb253b9cfe08146877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had definitions for "The Yocto Project Files" and "The Yocto
Project Build Tree" in this chapter. They were misplaced. I have
deleted them and moved them to the development manual.
(From yocto-docs rev: 9238e75abc4578043fd625b3796b86d42204e16f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the terms "Yocto Project Files" and "Yocto Project Build
Tree" into this development manual. They were previous defined
in the ADT manual. It makes more sense to have them where with other
terms.
(From yocto-docs rev: 2133110fd280db8cfbe998e6b46cdee0b260e777)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made changes to the section titles so they have quotes around them
for easier reading in the PDF manual.
(From yocto-docs rev: 5bea470682c3d834f30ab0d2fcba148ea33d653f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a development writer note and I noted that running a project
as an eclipse application pops a new instance of Eclipse.
(From yocto-docs rev: 6408ff7f4d59a0e535e560c7c0c63a3f373c640b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of writer notes for development purposes. I also
formated the section title references so they have quotes around them
for easier reading in the PDF verison.
(From yocto-docs rev: 37adb580cf6c1369da43fc4ef7aaa4cc1cee0e5c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixed some section naming conventions and minor wordings.
(From yocto-docs rev: 768d386c135c57ed3573e08bac72cad47fa101ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The information in the "Contributions" section has been migrated to
a "Submitting a Change" section in the YP Development Manual.
I re-wrote this section here to simply make a general statement
about how you can submit a change and then provided a reference
link to the appropriate section in the dev manual.
(From yocto-docs rev: 038caebb2815a8f09d35e99d5a2a0be76b05cacf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on submitting a change was very sparse and incomplete.
I have significantly upgraded this section to provide more details.
(From yocto-docs rev: af43bb1e4902c45afb5ac4b0f099877acd7a81a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several edits here. There is some mystery as to which changes
are actually part of this commit. I did a 'git diff' and am only seeing
one small change. If I later find they are not there I will delete the
file and replace with a back up I saved prior to submitting this commit.
(From yocto-docs rev: 62c63b3a812eaf92ca2bffa5714a6d327ac32d64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a type and also qualified the ability of YP as a testing environment.
(From yocto-docs rev: e158615eba04709e05cccaf29238bde6c9843671)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarification on the ability for testing. The wording as
it was implied that the YP provided a complete testing framework,
which is not true.
(From yocto-docs rev: e40b39179c69b69f012f231009131b1efa7e732b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered that in order to remotely deploy and debug an image from
Eclipse you have to have a Sato image. I added text to the note about
getting or building the image specifying that requirement.
(From yocto-docs rev: 060de7f6082bc3dbfa0f7d4e25b2933f15a61fc0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits are extensive and cross into two files: adt-prepare.xml
and adt-eclipse.xml. This is the first pass of a large re-write
to bring the examples up-to-date using the preferred version of
the Eclipse IDE (Indego 3.7). Much has changed.
(From yocto-docs rev: 57c1f905c6d66268a498e013193d003596f2303d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This bug was filed by Gary Thomas and was requesting more information
on the "hows" and "whys" of setting up your own package repositories.
At this point, I have added information to help the user understand
build performance issues when choosing between the RPM and IPKG packaging
systems. Likely, there is more that needs to be added to fully address
this bug.
For now, I added explanations in the packaging class and glossary areas
of the YP reference manual, a new paragraph in the YP QS just prior to
firing off a build, and a new bit of information in the configuring
PMS in the ADT Manual.
(From yocto-docs rev: d0025f862cb85ca741787b4737dca286e3ebfb45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the variable name of the adt_installer.conf file that points to
the IPKG repo. This changed for 1.1. Also made some small edits.
(From yocto-docs rev: 893b8b2f4bed8d4fce9a876e2184b3f5b9b004c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a link to the getting setup section of the YP dev manual for
help on setting up the YP files.
(From yocto-docs rev: 13832465de69bc41ddcc5e5696e707be8a3b6c5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed general edits to this chapter as well as addressed the two
items for the YOCTO #1419, which was re-opened. These included
specifying oprofile version 0.9.4 required and the note that
oprofile-server is only installed by default in the core-image-sato-sdk
image.
(From yocto-docs rev: fdca6458d9cd431052126d31f6eb4396c3327982)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the manual and made some general formatting changes,
updated some links in anticipation for the 1.1 release.
(From yocto-docs rev: f2d3a012fbe4e8db3cf07e5497acfdf732e55d97)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the Crownbay uses both EMGD and non-EMGD statments in the
linux-yocto_3.0.bbappend file I had to do some explaining. It turns out
you don't really need to just delete or comment out the non-applicable
statements.
I also adjusted some wording around the tuning file example. This file
I assumed was in the conf directory of the meta-crownbay directory.
It is really in the meta/conf/machine/include directory.
(From yocto-docs rev: 3f82656f7ffb392333f8cf59abf1414af5da512b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy ran into an error in the BSP example. The error had the
BBFILES_COLLECTIONS_mymachine in it (incorrect). It needs to be
BBFILES_COLLECTIONS.
(From yocto-docs rev: 267a385aa5ab0eb46cf583db418cbbcab1e8b89b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Darren provided me with some feedback on the logging mechanism
section for both Python and Bash.
(From yocto-docs rev: 7dddadf8caba01d3ef1046be52a1435eeaed60a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Stewart said that good coding practice is to set the variables
before any print statements. So I moved one statement above the
example printk statements.
(From yocto-docs rev: bad0537a5a6472fb3fef06de9763990a0c352e25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback per Dave Stewart added to clarify which two important
configuration files need editing.
(From yocto-docs rev: f37ade7f0d31ae6284c3bfee184c88b523f5fe69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
these are new figures to support the "Modifying the Kernel" conceptual
section.
(From yocto-docs rev: 1a0ecc104479b54a8122e3de2b30694fac8d7e73)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write of this section based on feedback from Dave Stewart.
Dave's comments centered around not being able to understand the overall
concepts of the Git repositories, the source areas on the host, etc.
I have added several illustrations and written around them to try and
better explain the kernel storage system in Git used by YP and how
that tranlates into host-resident code that the developer ultimately
uses and the Poky build system uses for the build.
(From yocto-docs rev: 4e37f68f77261f6519426fb81ba407c456f8d1a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added 'xterm' as a required package to both Debian-based and RPM-based
hosts.
(From yocto-docs rev: 0a933001bd8c546a5d4960842c5e897061d09369)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1419: I have re-worded the informational bullet on the OProfile
tool to indicate that you must have version 0.9.4 or greater of the
oprofile-viewer in order to have usable data on the host.
(From yocto-docs rev: 44fabbf8015b9bb624a5d70336a4440bd73c2c34)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file used a lot of crown bay stuff that had gone old.
I have updated the sections and used the latest Crown Bay
files.
(From yocto-docs rev: 67b119d66bacd0870f18a124bacabf32d65b6f3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This machine is out of date. I replaced both occurences with
"qemux86", which is more relevant to YP.
(From yocto-docs rev: 8fe6feccc25f594a444b5177d1192899b3cbdd9c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert Day correctly pointed out that the usage comments in the Makefile
were not exactly accurate. The VER argument is necessary only if you
are going to publish a document to the YP website. I updated the usage
comments accordingly.
(From yocto-docs rev: dd033227af0f88e45b539b92be8f1321fcd4f975)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Darren's feedback on this new section I updated changes based
on his comments.
(From yocto-docs rev: a5bbba42ec0da5b2f83f7a64ac8eef466e9c89b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a section in the YP ref manual that gives reference type information
on adding a machine. This type of information is detailed well in the
BSP example appendix in the development manual. I don't want to completely
eliminate the information in the YP ref manual as is suggested by the
910 bug. I think referencing it in the dev manual for now works.
(From yocto-docs rev: e55dd8228d1376c9df01e320163862ddf35a5156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on how to contribute changes to the YP resides in this
development guide. I took additional information from the YP reference
manual and merged it into the section here.
(From yocto-docs rev: 945dd29417cf51044332114e499b08fe24ef3077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP reference manual had an appendix that included reference or
resource information such as mailing lists, bugzilla link, and
IRC chat stuff. This type of information is best suited for the
introductory area of the development manual.
(From yocto-docs rev: a5576ed0d3360cdb32070ade6577cb7687923b10)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This chapter was quite old as it had not been touched since the original
Poky Handbook days. I re-wrote the sub-sections with today in mind.
(From yocto-docs rev: e59bede734a8fe3e9b41698e2b42ba487ec80595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In general, the term Poky can be replaced by "the Yocto Project."
The term Poky can be used as a term for the Yocto Project build system.
I left it in place for a few areas where it was easy and would not
be confusing.
I also performed general rewrites for the FAQ.
(From yocto-docs rev: bb24bcf21311c68576fb8c3fec86ad8303f557f2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was incorrectly referring to SRCDATE variables in a context that should
have been SRCDATE destinations.
(From yocto-docs rev: eb255d9369b5bb3905a586433d472fd100c737dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul sent me a bunch of minor edits and technical corrections
for the ADT, BSP, Development, and YP reference manual.
Most changes were taken as he submitted them. However, some
formatting conventions were not followed in the commits he made
to yocto-docs/paule/docs2. After merging them to my yocto-docs/master
branch I fixed some issues.
(From yocto-docs rev: 93f4ea2dee976448f623953e801a80d59736450a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The -b option is not required to show the environment used to build a
specific package; usually the best practice is to specify the package
name alone.
(From yocto-docs rev: d59772fd7edd76dbc8018479c072badb591601c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add note about specifying a full revision ID to prevent querying the
remote server on every parse
* Mercurial also supports this variable
(From yocto-docs rev: 47ce273dd751b0ae32b5c53310b6aedc4dade2ef)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These documents do not have titles when showing up on the website; set
the title tag value so that they do.
(From yocto-docs rev: baf958e3f49317689275b14dd31c6141f36c8c65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add documentation of LAYERVERSION, LAYERDEPENDS and new layer priority
behaviour
* Improve some wording
(From yocto-docs rev: be7c10f3b8b35ff231e5974a48936e66fd49fcbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-live and -directdisk image have been removed; add a tip about using the
live option in IMAGE_FSTYPES to build any image as a live image.
(From yocto-docs rev: ef7c508a4073c4f04c2368420e64a5d6620c8fbc)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* xterm is now the default
* Konsole from KDE 4.x will no longer work due to changes in behaviour
(From yocto-docs rev: 031a619ca19dbc2011a4df7bba1c332f2770e15d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We really need to have LIC_FILES_CHKSUM in all of our example recipes,
because it is now mandatory.
(From yocto-docs rev: 76998b7c54246e0505cf01b21d65d04ab285f1f0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document that LIC_FILES_CHKSUM is mandatory, when gets validated, and
improve some wording.
(From yocto-docs rev: ca878d7b0c84812ef29bbaf5894c96dd89500ec9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable was renamed (to match OE) in the Yocto 1.1 development
cycle.
(From yocto-docs rev: 5cda8fe3b5dd18b629ccd13427da3b5743ae66ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replace the reference to this being the manpage.
(From yocto-docs rev: ebb689a8ccc2aaf5d21341c69899588e77d5172c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the references to the Poky Reference Manual to the Yocto Project
Reference Manual. I also changed 'poky-qemu' command to 'runqemu'.
(From yocto-docs rev: f46003eab91d1f682113b9e0672efd486a509ec6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The links to the lettered divisions of the glossary do not work.
I changed them to the first entry for each lettered area.
(From yocto-docs rev: b7692bcfa19fb940a050c0cf72dc2f7e427b8ba7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix had poor organization. I re-organized it according
to configuration and recipe context. The sub-sections break out much
more nicely now.
(From yocto-docs rev: 7a3a7b3a7b4861122194ea0a78c16af531f0078b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the document, several variables state their default values. I set the
formatting to surround a default value with double quotes in all cases.
I also fixed a typo for "RECOMMEDNS"
(From yocto-docs rev: 3da85f54df6fd4ad64d5be2cc9ae0e6dd50a68f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I also fixed formatting and some minor wordings.
(From yocto-docs rev: b1bbfe89cb250ef5267fb16635dc41338aab0c59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the "Poky" references to "the Yocto Project" and performed
general edits where necessary.
(From yocto-docs rev: a7ef3e7d5c792bde5231b9302e614cb7b5db81b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I swapped the Yocto Project for Poky throughout. Some other general
edits were done. I put in a reference to a spot to learn how to best
set the BB_NUMBER_THREADS variable.
(From yocto-docs rev: 2543a915957014a59e6c49a1cdde270725d47af3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I converted "Poky" to "the Yocto Project." I also updated several examples.
In particular the build/tmp/work example.
(From yocto-docs rev: eb82bc36904f502fb4f314ff05eb86cff27ce0b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The poky-beaver.png, poky-log.svg, and white-on-black-yp.png
figures are not used and do not need to be in the file structure
for this manual.
(From yocto-docs rev: c2217102813fc0a72922bf2baf24e07184cf24e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a parallel textual construct at the beginning of each section
that details a directory in the Yocto Project file's structure.
I did not like starting these sections with a literallayout string.
(From yocto-docs rev: 5dde476f0c02d655217f3fa863522e8b7df57cda)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted to Yocto Project from Poky.
(From yocto-docs rev: 0263e8b29efeff051184ce1700da9559ea511faf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the profiling sections to reflect Yocto Project rather than
Poky.
(From yocto-docs rev: 4f2c3bc93d97a6a8676fdd14ff9061bb92bdf5c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added emphasis to a bulleted list and I also updated a section title
to reflect Yocto Project instead of Poky.
(From yocto-docs rev: f967aff5c0a0047ef44145c6a95da84e57c255b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote and reorganzied this chapter to reflect the book as
a Yocto Project Reference Guide.
(From yocto-docs rev: ef3c3955ab0cedb57d9ae48041ed94806fe34001)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title to refelect the Yocto Project and not Poky.
(From yocto-docs rev: 151c1925659e986b27866fed5abfcba96744b204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
