Change the name of the manual to "Yocto Project Application
Development and the Extensible Software Development Kit (eSDK)".
The "sdk-title.png" file was updated and all title information
was updated.
(From yocto-docs rev: 502a49a9e4f5e80efe16507391bc9d9618efefbd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also affected a link in the dev-manual and some setup stuff
in the mega-manual and sdk-manual.xml file due to a new chapter
being introduced.
This section on the Eclipse stuff is big enough to warrant its
own chapter. I decided to pull it into a separate chapter of its
own.
(From yocto-docs rev: a4b2b605902f09bb200facfabb0a7c355fbf4c87)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The dev-manual title changed to the Yocto Project Development Tasks
Manual. I fixed a link to this title. Also, fixed several external
links that were going to the dev-manual and should have been going to
the ref-manual.
(From yocto-docs rev: 69c0832ea9378d097e85e23e45cec750b8c42042)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two links that should have been to different places were overlooked.
I fixed these.
(From yocto-docs rev: a1681d065812546a573ed778141289a6b476cecd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string in the manual revision table needed updated across the
set except for the kernel-dev manual.
(From yocto-docs rev: e087a707e02ff913baba2ac8bc6594206f53f70c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11968]
Purged all occurrences of the "oe-init-build-env-memres" script
from the YP documentation set. Occurrences in a lot of places.
The BBSERVER variable was also impacted and had to have the
definition updated.
(From yocto-docs rev: 274b05108d1bc53df20c11ab2efa15363bce23da)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #11970]
Updated the field description for "Specify Sysroot Location" to
note that the user can have this either downloaded or built and
the ramifications of using a downloaded root filesystem.
Updated the "Deploying and Debugging the Application" steps for
both supported Eclipse versions to tell the user what to do if
a browse operation fails or times out.
(From yocto-docs rev: 623000af186cb5632af551f95384d4c96d4d6c54)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the "Patching the Kernel" section, which was in the
dev-manual to the kernel-dev manual. During the move,
renamed the section to "Using devtool to Patch the Kernel".
This move bothered a lot of links so I had to fix them in
various manuals.
(From yocto-docs rev: a000be1eddf33e4d7de8f350e076d48e27ca4b98)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps needed updated to reflect the introduction of CROPS
as a way to prepare a build host.
(From yocto-docs rev: 8f52372afad4c32d0b895a88c2298625e7f53da3)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section needed to be a step-by-step procedure.
(From yocto-docs rev: de4868c97c1199b39b3c3e68b4ff159f6546cd9e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section "Locating Pre-Built SDK Installers" was turned into
a procedure. I also added some information on the actual names
of the *.sh files.
(From yocto-docs rev: 548886d5a392164783596c0c04779aaffd6ac930)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The section on the devtool workflow in the dev-manual was 99%
identical to what was in the sdk-manual. I have moved the
workflow procedure from the old "Model" chapter of the dev-manual
to be merged with what was in the sdk-manual. In truth, the
only things added were a note about devtool not being exclusive
to SDK development.
The result of moving (deleting) this section was that the "model"
chapter of the dev-manual went away. The devtool stuff, Quilt,
devshell, and python shell are all out now and there is no
chapter left. So, mega-manual had to be adjusted to not pull that
chapter in when building the dev-manual. I had to delete three
figures that were used in the flow. The figures were already
replicated in the sdk-manual. The figures were deleted from the
figures folder of both the dev-manual and the mega-manual.
I had to make sure all references to the old devtool stuf in the
YP doc set were adjusted.
(From yocto-docs rev: 5dbd643d31ab502df53a22229e457a03da7772b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
The "Git" section in the dev-manual is really about concepts.
There are a couple of examples that might or not might be
allowed to ultimately stay. I have moved the section to the
ref-manual. If those examples get replicated in the new
dev-manual, I will update the "Git" section further. For now,
however, these remain in this moved section.
(From yocto-docs rev: 2e4b87fdab29c13ce0d2314e50c93e37404b6f7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For development purposes, static libraries need to be
present only in the SDK. We do not need those static
libraries in the image for most scenarios. So, replace
IMAGE_INSTALL with TOOLCHAIN_TARGET_TASK in the documentation.
I updated the note to reflect this.
Suggested-by: Maxin B. John <maxin.john@intel.com>
(From yocto-docs rev: c05458c6614c38961d23db8f894d542bf93dbf09)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual
to the ref-manual broke the links to the "Metadata" term.
I fixed these.
(From yocto-docs rev: 190da4b4d44952d141db26ca72b5bc1a52d77023)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke links for the "cross-development-toolchain" term.
I have fixed these.
(From yocto-docs rev: f2d2b5936bd339d691ab859cbe3df86e3da58f0c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #11630]
Moving the "Yocto Project Terms" section from the dev-manual to the
ref-manual broke several links to the id "build-directory". I fixed
these to reference into the ref-manual now.
(From yocto-docs rev: debe2ae8ce203ebe0f1cee0de54124c15df8bb7e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP doc set was using a link to an out-dated video that
showed how to configure and run Eclipse. The video was very
old and Jessica suggested just removing it. So, I replaced
all occurrences of the link to the up-to-date appendix in the
SDK manual that provides information on the latest supported
version of the Eclipse IDE.
(From yocto-docs rev: b4af1a79078352df5558e20c0b9cfa97fa141abc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated poky.ent to use 2.4 variables and numbering
Updated mega-manual.sed to use "2.4" string for links
Updated all manual revision tables to use "2.4" and
"Usually October, 2017" string.
(From yocto-docs rev: 17ec7da6ab3fd450c2010812f7ad689288b12dcc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
poky.ent - changed the "tbd" and "TBD" strings to "pyro" and
"Pyro", respectively.
Manual Head Files - Updated the manual history table with the
May release month.
(From yocto-docs rev: 076226d2986d0cf69685121e4342f50c1603fc7b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10076]
The note on the title page for each manual was brief regarding
where to find the latest version of the manual. I updated the
note to have more detailed information on finding current,
alternate, and latest versions of the manual based on YP
releases.
(From yocto-docs rev: 0ec81465296a7a78309d3039af4d00caa52d2285)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10714]
Apparently there is some issues with GTK3 libraries for the Mars
Eclipse version. The note provides a workaround that requires
editing the eclipse.ini file.
(From yocto-docs rev: f940d5d3f7bf446af8f3c7cec5958c8395425a69)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8584]
Made some edits to tighten this down and make it more efficient.
(From yocto-docs rev: d5a37b77fa5c8df766248849601ca229502bb4ab)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the following:
* All manual revision tables to indicate a 2.3 release proposed
for April of 2017.
* Updated the poky.ent file so that all variables needed reflect
2.3 values.
* Updated the mega-manual.sed file so that processing of links in
the mega-manual work for a 2.3 release.
(From yocto-docs rev: 926e282c17b67c79b94a0b62a0b18bfbe0b26c40)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8584]
This fix essentially had to document how to add the API
documentation to the standard SDK. The fix required adding a
new appendix to the SDK manual on how to customize that
standard SDK. I could not put just one topic in a new appendix
so I also added a sub-section on how to add indidual packages
to the standard SDK.
Other changes here were the introduction of a new file for the new
appendix, updated the mega-manual.xml file so that it would include
the new chapter when the MM was built. Finally, I added some
cross-referencing to the new appendix from the TOOLCHAIN_HOST_TASK
and TOOLCHAIN_TARGET_TASK variables. And a cross reference from the
distro features section on the api-documentation bullet.
(From yocto-docs rev: 1fb4321ae42253d1fc9602496b5e9e8b495197dd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8584]
Updated the "Distro Features" section to include the
"api-documentation" feature.
(From yocto-docs rev: 5b4e8fc58b84aea9a940f67f8d7585912fadc676)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added string "October 2016" as the release date.
(From yocto-docs rev: db40986677746afbbb138d9cbe3885111550b7c5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10267]
Changed the example to use a single long line.
(From yocto-docs rev: c80d8bb8773b7bbe9c85c48880f42ffb273729b7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied several nits across the manuals based on reviewer
comments. All these corrections relate to the task of shuffling
topics around that have to do with the extensible SDK and the
devtool.
(From yocto-docs rev: 9f8079adc7fa2897fd885aff8e64f9721212e9c7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed the note box formatting for the cross-reference
from the sdk-manual and dev-manual sections that
talk about devtool. The reference is now non-note
form and goes to the ref-manual devtool quick ref.
* Added devtool upgrade as a third item in the list that
introduces methods to use devtool.
* Fixed the working on the devtool finish step 5 for both
the dev-manual and sdk-manual.
* Renamed the new chapter that describes different projects
you can use devtool on. The focus is on using the SDK
toolchain directly.
* Scrubbed the entire sdk-manual for the term "toolchain
installer" and replaced with "SDK installer".
(From yocto-docs rev: 6d4daef49cc6d54a700a8c3965c9e8814f75d20a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extracted the sections on Makefile, Autotools, and Eclipse into
their own new chapter. Seemed to make sense as they are projet
types for both standard and extensible SDK types. Also, swapped
the order of appearance from standard first to extensible first.
This swapping caused a bit of rewriting.
(From yocto-docs rev: 138a4d5576123da800a8fd8d99462a138ceeb743)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed a new figure and a new section.
(From yocto-docs rev: d413ca7b9b946450af7c2c15ab0e68e9181517e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes can't be in the final version of the manual.
Now is the time to get them out.
(From yocto-docs rev: 600b4f2c7360b30d12fdc7ed0f5ba41bc09fc778)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10032]
The fix to remove the BitBake Commander from the tools to install
when dealing with the Eclipse Yocto Plug-in has happened.
Consequently, I removed the developer notes in the manual stating
that the Commander was still showing up there. The manual set
is now clean of this stuff.
(From yocto-docs rev: fbe169b086faac571de8a2ebd9d32682162cfd31)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10267]
The example works better using OECORE_TARGET_SYSROOT for the
aclocal line. I changed it to that.
(From yocto-docs rev: 362b786e7bf2083c5809e961f61c0ad81b778d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new command devtool finish has superceded the final commands
in the SDK workflow. I updated the two figures (add and modify)
to reflect this new flow. I also updated the ordered number list
to match reality.
(From yocto-docs rev: 0ba31e730cd748d06eab8d46b38764cda5c4e3bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new variable description for SDK_INCLUDE_TOOLCHAIN.
Along with the new glossary entry, I updated a couple places
where it would be relevant to cross-reference the new variable.
(From yocto-docs rev: df99b097595e7488a93354082b8d9f33acd9c229)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided clearer instruction on how to set up a new SSH
connection when deploying an application to QEMU.
(From yocto-docs rev: 93adc542a40e86377380684e1ce294edd0fd7268)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10183]
Added a new variable entry for the PACKAGECONFIG_CONFARGS variable.
With the introduction of the new PACKAGECONFIG_CONFARGS variable,
many places in the mainstream YP documentation that referenced
how to pass configure arguments using EXTRA_OECONF needed to also
make mention of this new variable. I added many cross-references
to the new variable.
(From yocto-docs rev: 00f02d45319bab90b72eab89fcb69cbe8bd05bb5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
Applied changes throughout this section to move it from Luna to
the Neon version (latest) of Eclipse. We now provide a single
thread for Eclipse, which is based on the latest version (Neon).
Information for Mars, which is also supported) is in a new Appendix
C.
(From yocto-docs rev: 82995d9c49e4c55707591a1375c5d86874c589b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the Bitbake commander item and renamed the ADT one to SDK.
(From yocto-docs rev: 7bb7823bd9991ce95315b76bdfb3175c53198401)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a note in step 4 of the "Workflow Using Eclipse(tm)"
section that an alternative method to getting the target
root filesystem and toolchain is to build them out.
Referenced the wiki.
(From yocto-docs rev: 60720be0fe0d29a0b695005bb40f5b0c25475b55)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dumped a link to pre-built kernel naming information. The
link was to the sdk-manual, which made no sense.
(From yocto-docs rev: 9b7a9f8217d9251f2d7166afc0bb3b4235264201)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
First draft of the new appendix supporting the Mars version
of eclipse. New appendix file created and entry made to
the sdk-manual.xml file to include that new appendix file
into the main book.
(From yocto-docs rev: 2fb79c29bcbb5c0801f67d4c245c07c3aa9d2ca2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
sdk-manual: WIP on appendix C
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file was named 'configure.in' and was slightly different than
what it needed to be in order to work. The file needs to be named
'configure.ac' and have slightly different contents. Fixed both.
(From yocto-docs rev: 1b80e90848d23737462f8b0e55b2ff604f9abf41)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates included minor items for wordings and clarity. Review
comments from David Kinder, Stephen Ballard, and Paul Eggleton.
(From yocto-docs rev: b25e5cab60f9c1e059fadd844a3a75d9df450ebf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needs to used the downloadable XSL files and not the static
local 1.76.1 versions.
(From yocto-docs rev: 1dfc6081ffb745e424ff5f73c708e2559466831e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was still using the 1.76.1 XSL style sheets. They need
to use the downloadable ones.
(From yocto-docs rev: 27e29bedb2d1c080a23298fc0ae23054c40971aa)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the following note in the section that deals with running
Eclipse with a remote application.
Fixes [YOCTO #9276]
Currently, Eclipse does not support SSH port forwarding.
Consequently, if you need to run or debug a remote
application using the host display, you must create a
tunneling connection from outside Eclipse and keep
that connection alive during your work.
For example, in a new terminal, run the following:
ssh -XY user_name@remote_host_ip
After running the command, add the command to be executed
in Eclipse's run configuration before the application
as follows:
export DISPLAY=:10.0
(From yocto-docs rev: 7bf2875ff1653a8e50fa8e2bba540b2eb2512d2d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the heading for "Optionally Building a Toolchain
Installer" to "Building an SDK Installer". This changes the
heading and many references to that heading.
(From yocto-docs rev: 97d8cd34d0dd0993b1b1135bb75f2212bb46878a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a devtool add and devtool modify flow digram. Updated
the Makefile to support those figures in the tarball creation.
(From yocto-docs rev: b40692065262dee0209329886b6e3a743c32b1bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using "red" text to indicate sections of the manual that
are my development notes.
(From yocto-docs rev: 95b432d852ac3248874a2a958d4a80e59187f062)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows you to use the following to make a paragraph display
using red-colored text:
<para role='writernotes'>Here is the sentence.</para>
What this allows is to create areas in the manual that are
easily identified as questions to the reviewers.
(From yocto-docs rev: 007ea508a36f453c66970666490a82885a8749e1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text and a new figure to show the resulting directory
structure from running the SDK installation .sh script.
(From yocto-docs rev: 3c5aec4a0088262e60ee6becb5e34552feeb6151)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The xslproc needs special handling of the statement that applies
the numbering for appendices. I updated the line to use that
format so when making the file you do not get a billion
unrecognized parameter errors.
(From yocto-docs rev: a2787b7a6d045196c0d524e11531ca3aca41b9c2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Including three figs for Toaster manual.
(From yocto-docs rev: c41f9859b6cfc4e34b8e0d0e812fad0b8dd44540)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Makefile - Added support for new sdk-manual.
mega-manual - Added the sdk-title.png file to the list of figures.
Modified to support inclusion of the new sdk-manual
into the mega-manual.
poky.ent - Added a new string to support the new sdk-manual.
sdk-manual - Created new sdk-title.png image.
Created new sdk-manual.xml file.
Created sdk-manual customization layers for both
standard build and Eclipse build.
Note that we are pointing to local XSL templates for
and these will change going forward.
Created new sdk-style.css file.
Created three chapter files that are placeholders
at this point.
(From yocto-docs rev: ab591831a97a97d405d13ed75e9fb01e0452c292)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
