We always wants ttyS0 and ttyS1 in qemu machines (see SERIAL_CONSOLES),
if not serial or serialtcp options was specified only ttyS0 is created
and sysvinit shows an error trying to enable ttyS1:
INIT: Id "S1" respawning too fast: disabled for 5 minutes
[YOCTO #10491]
(From OE-Core rev: 3a0efbbe6bb5a7f0fb3df0f6052b11e56788405f)
(From OE-Core rev: ab8d1a73ad5285dbc86352813b24db2adb3c6367)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the simplest case, "runqemu qemux86 <some-image> qcow2 ovmf" for an
EFI-enabled image in the qcow2 format will locate the ovmf.qcow2
firmware file deployed by the ovmf recipe in the image deploy
directory, override the graphics hardware with "-vga std" because that
is all that OVMF supports, and boot with UEFI enabled.
ovmf is not built by default. Either do it explicitly ("bitbake ovmf")
or make it a part of the normal build
("MACHINE_ESSENTIAL_EXTRA_RDEPENDS_append = ' ovmf'").
The firmware file is activated as a flash drive instead of using the
qemu BIOS parameters, because that is the recommended method
(https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=764918#47) as it
allows storing UEFI variables in the file.
Instead of just "ovmf", a full path to an existing file can also be
used, just as with the rootfs. That may be useful when making a
permanent copy of the virtual machine data files.
It is possible to specify "ovmf*" parameters more than once, then
each parameter creates a separate flash drive. This way it is possible
to use separate flash drives for firmware code and variables:
$ runqemu qemux86 <some-image> qcow2 ovmf.code ovmf.vars"
Note that rebuilding ovmf will overwrite the ovmf.vars.qcow2 file in
the image deploy directory. So when the goal is to update the firmware
while keeping variables, make a copy of the variable file and use
that:
$ mkdir my-machine
$ cp tmp/deploy/images/qemux86/ovmf.vars.qcow2 my-machine/
$ runqemu qemux86 <some-image> qcow2 ovmf.code my-machine/ovmf.vars.qcow2
When Secure Boot was enabled in ovmf, one can pick that instead of
the non-Secure-Boot enabled ovmf.code:
$ runqemu qemux86 <some-image> qcow2 ovmf.secboot.code my-machine/ovmf.vars.qcow2
(From OE-Core rev: b91fc0893651b9e3069893e36439de0b4e70ad13)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The magic detection of the rootfs parameter only worked for image
recipes which embedd the "image" string in the middle, as in
"core-image-minimal".
Sometimes it is more natural to call an image "something-image". To
get such an image detected by runqemu, "-image" at the end of a
parameter must also cause that parameter to be treated as the rootfs
parameter.
Inside the image directory, "something-image" has an -<arch> suffix
and thus no change is needed for those usages of
re.search('-image-'). However, while at it also enhance those string
searches a bit (no need for re; any()+map() a bit closer to the
intended logic).
(From OE-Core rev: ca0fad3ad9d75d4198388b2a3133326267fc58db)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'arg' isn't defined, the right name there is 'p'.
This fixes a rather obscure error message when that code path
ends up being taken:
$ runqemu some/existing-file-name
runqemu - ERROR - name 'arg' is not defined
runqemu - ERROR - Try 'runqemu help' on how to use it
(From OE-Core rev: 3f11e4cbb36fc65ff92296065e5f0a508b210ac7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: c72d5acb9c2f4a7d4dfe0e78aae832b10aec4429)
Signed-off-by: Ming Liu <peter.x.liu@external.atlascopco.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At present it is silently assumed all QEMU machines support networking.
As a consequence, one cannot run QEMUs without network emulation
using "runqemu".
This patch allows bypassing any network setup providing the qemuboot.conf
file contains:
qb_net = none
[YOCTO#10661]
(From OE-Core rev: 6a9454027ced4efbb401a23df94f711b8253c8fa)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When invoking "runqemu" with a mistyped image or architecture name,
the resulting error message is about the missing qemuboot.conf,
without any indication about the root cause:
$ runqemu core-image-mimimal ext4 intel-corei7-64
runqemu - INFO - Assuming MACHINE = intel-corei7-64
runqemu - INFO - Running MACHINE=intel-corei7-64 bitbake -e...
runqemu - INFO - MACHINE: intel-corei7-64
runqemu - INFO - DEPLOY_DIR_IMAGE: /fast/build/refkit/intel-corei7-64/tmp-glibc/deploy/images/intel-corei7-64
Traceback (most recent call last):
File "/work/openembedded-core/scripts/runqemu", line 1095, in <module>
ret = main()
File "/work/openembedded-core/scripts/runqemu", line 1082, in main
config.read_qemuboot()
File "/work/openembedded-core/scripts/runqemu", line 643, in read_qemuboot
raise Exception("Failed to find <image>.qemuboot.conf!")
Exception: Failed to find <image>.qemuboot.conf!
Including the name of the actual file the scripts expects to find plus
adding some hints what to check for might help. The error now is:
$ runqemu core-image-mimimal ext4 intel-corei7-64
...
Exception: Failed to find <image>.qemuboot.conf = .../tmp-glibc/deploy/images/intel-corei7-64/core-image-mimimal-intel-corei7-64.qemuboot.conf (wrong image name or BSP does not support running under qemu?).
The comment about the BSP is included because that would be the real
reason why the file might be missing.
(From OE-Core rev: 946c4558f6c2726d0f12e48974568188a4ffef0d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
- Add QB_NETWORK_DEVICE to set network device, it will be used by both
slirp and tap.
- Set QB_NETWORK_DEVICE to "-device virtio-net-pci" in qemuboot.bbclass
but runqemu will default to "-device e1000" when QB_NETWORK_DEVICE is
not set, this is because oe-core's qemu targets support
virtio-net-pci, but the one outside of oe-core may not,
"-device e1000" is more common.
- Set hostfwd by default: 2222 -> 22, 2323 -> 23, and it will choose a
usable port when the one like 222 is being used. This can avoid
conflicts when multilib slirp qemus are running. We can forward more
ports by default if needed, and bsp.conf can custom it.
- Use different mac sections for slirp and tap to fix conflicts when
running both of them on the same host.
[YOCTO #7887]
CC: Nathan Rossi <nathan@nathanrossi.com>
CC: Randy Witt <randy.e.witt@linux.intel.com>
(From OE-Core rev: 7dddd090806914a62d977730440d803e48f44763)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
* In build1:
$ runqemu nfs qemux86-64
In build2:
$ runqemu nfs qemux86-64
It would fail before since the port numerbs and conf files are
conflicted, now make runqemu-export-rootfs work together with runqemu to
fix the problem.
* And we don't need export PSEUDO_LOCALSTATEDIR in runqemu, the
runqemu-export-rootfs can handle it well based on NFS_EXPORT_DIR.
* Remove "async" option from unfsd to fix warning in syslog:
Warning: unknown exports option `async' ignored
* Fixed typos
Both slirp and tap can work.
(From OE-Core rev: 84b2281595bbdb497daa42640e3ee4658bf0bed8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When "runqemu /path/to/<file>.cpio.gz", it used the last suffix "gz" as
the fstype which was wrong. Check filename against self.fstypes firstly
can fix the problem.
(From OE-Core rev: 68c7589b67a83977331a04356b53aa51680a1d9d)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some cirsumstances the user doesn't want to supply a kernel, rootFS
or DTB to QEMU. This will occur more now that QEMU supports loading
images using a '-device loader' method.
Allow users to specify 'none' for QB_DEFAULT_FSTYPE or QB_DEFAULT_KERNEL
to avoid supplying these options to QEMU.
(From OE-Core rev: 2cc01c4e46b05b7ffcc8a11e7ebde6c43256c3c3)
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It may be necessary to override the parameters gathered for the qemu
invocation. For example, the qemux86 machine configuration sets "-vga
vmware", but when using OVMF as BIOS, only "-vga std" is supported.
By putting the parameters derived from custom runqemu parameters like
"qemuparams" after the parameters derived from the machine
configuration the user gets the possibility to override those.
(From OE-Core rev: b6feb7578d60289c8b6e376cfaac8a3ee45e72f9)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This will add support to use qemu from the running host,
with this is possible to put qemu-native in ASSUME_PROVIDED
variable.
By default it will try to get qemu from the build sysroot,
and only if it fails will try to use the host's qemu.
(From OE-Core rev: fe7fd2cd3a9c4fb5b31bd3cab81c96a3b81cb540)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The function write_qemuboot_conf() in qemuboot.bbclass always inserts
the full path into QB_DEFAULT_KERNEL. Remove this path before using the
variable.
(From OE-Core rev: 7c0fdfa1316011b856a795d8e42c36ac8b5638b2)
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using 'slirp' as a command line option to runqemu will start QEMU
with user mode networking instead of creating tun/tap devices.
SLIRP does not require root access. By default port 2222 on the
host will be mapped to port 22 in the guest. The default port
mapping can be overwritten with the QB_SLIRP_OPT variable e.g.
QB_SLIRP_OPT = "-net nic,model=e1000 -net user,hostfwd=tcp::2222-:22"
(From OE-Core rev: 80e6fc678f3dcd774d9376cdf2a6afcba2cd0b09)
Signed-off-by: Todor Minchev <todor.minchev@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add mipsel and mips64el as an option.
(From OE-Core rev: 072dd5b3b164ca7a5fd9dc969c991c15adeb0cbe)
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU produces a warning if drive format is not specified:
WARNING: Image format was not specified for
'tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.wic'
and probing guessed raw.
Automatically detecting the format is dangerous for raw images,
write operations on block 0 will be restricted.
Specify the 'raw' format explicitly to remove the restrictions.
Set image format to 'vmdk', 'qcow2' or 'vdi' for correspondent image
types. Set it to 'raw' for the rest of image types.
(From OE-Core rev: 5100bb36502ef7c81220a3c4809eb1b3ac83801f)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If runqemu-ifup fails hen running testimage, a rather cryptic error
regarding "no tty present" is displayed. If this step fails, we
should at least point the user at runqemu-gen-tapdevs. A quick search
of this term in the manual will lead them to "Enabling Runtime Tests
on QEMU" which should give them all the info they need.
(From OE-Core rev: 3b6494fad2b8b65e0d52cda0cdf500e93c72823a)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When booting a system with the rootfs being of cpio* type the networking
setup should still work the same as for all other root filesystem types.
This change removes the clearing of the NETWORK_CMD variable allowing
for the slirp/tap setup to be provided to QEMU.
(From OE-Core rev: 7d01a9c80de0cdbac3831301dd996c7b61754c74)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not all QEMU machines (outside of those available in OE-Core) are
capable of using the virtio-rng-pci device due to various machine models
not having a pci/virtio bus. This makes it such that the use of the
'-device virtio-rng-pci' flag to QEMU is machine specific.
This patch removes the general addition of the flag to all runqemu
targets and adds the flag into the QB_OPT_APPEND for all the qemu*
machines in OE-Core that support its use (which is all of them).
(From OE-Core rev: e890c05e66a21702e9e8ccce794b74cb7f5518ed)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If DEPLOY_DIR_IMAGE doesn't exist during check_arg_machine() we
will attempt to guess a suitable value later when check_and_set()
calls validate_paths(), therefore this shouldn't raise an exception
(From OE-Core rev: ed8d6f391c567048bd50dc3234804915f8212cef)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a MACHINE value is passed we can't validate it by running bitbake
as the toolchain environment doesn't include the build system, we
must assume that the passed value for MACHINE is correct.
(From OE-Core rev: 2c569678566c49b3ea237ef2de0fbae782263449)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Emulate some logic from the prior, shell based, version of runqemu
to try and infer the correct setting for MACHINE from the kernel
and rootfs filenames.
(From OE-Core rev: a5adabe1414061d6864c5913dd5e66a4527838f1)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to validate and ensure all paths are set regardless of
whether runqemu was invoked with a .qemuboot.conf file or
otherwise. Split this logic out into a separate method called
during check_and_set()
(From OE-Core rev: e843b2d49a151c1fe0d2a7ba00c41d2a35775736)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Search rootfs in the following order:
- IMAGE_NAME*.FSTYPE
- IMAGE_LINK_NAME*.FSTYPE
* Search kernel in the following order:
- QB_DEFAULT_KERNEL
- KERNEL_IMAGETYPE
- KERNEL_IMAGETYPE*
* Search dtb in the following order:
- QB_DTB
- QB_DTB*
- *.dtb
* Fix DTB, it should only work with "-kernel" option.
[YOCTO #10265]
(From OE-Core rev: 32ff0974ed06f797c6b7d9092a8dc9ae50e9a572)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no STAGING_DIR_NATIVE or bitbake in a extracted sdk,
so check OECORE_NATIVE_SYSROOT and use it.
(From OE-Core rev: 93649edc034f2540ff55dc9b41638797209cfb9c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A qemuboot conf file is a convenience but it should still be
possible to invoke runqemu without them, especially for examples
such as using the SDK with an extracted rootfs via NFS.
As read_qemuboot() is always called we need to be sure that function
can return cleanly, without throwing Exceptions, even if a qemuboot
conf file isn't found.
(From OE-Core rev: 3541c21f1976b517b79a19882240a8f36b970292)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the kernel or rootfs names written to the qemuboot.conf can't
be found, try and find the symlinked variant of the filename.
This will help usability of runqemu, for example where a user
downloads an image and associated files as the symlinked names
yet the qemuboot.conf variables point to the full, non-linked,
file names.
(From OE-Core rev: ca5a686c6e165a51f95cb6a834cd53f6f66d42d4)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it clearer that we are looking for a file which ends with
qemuboot.conf
(From OE-Core rev: 2579e05269a14b53a54232a8bf4414ac2dfe6472)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a required binary cannot be found print some guidance pointing
to using a sourced OE build environment or a qemuboot.conf file,
based on a similar message from the previous shell-based runqemu.
(From OE-Core rev: 87cfb5165490cd4e7a8c2570ef5a62898db8395e)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The open(self.lock, 'w') may fail when the lock is created by other
users, return false for this case to let it try other devices.
Fixed:
runqemu - INFO - Running /sbin/ip link...
runqemu - INFO - Acquiring lockfile /tmp/qemu-tap-locks/tap0.lock...
Traceback (most recent call last):
File "/buildarea/lyang1/poky/scripts/runqemu", line 972, in <module>
ret = main()
File "/buildarea/lyang1/poky/scripts/runqemu", line 963, in main
config.setup_network()
File "/buildarea/lyang1/poky/scripts/runqemu", line 810, in setup_network
self.setup_tap()
File "/buildarea/lyang1/poky/scripts/runqemu", line 761, in setup_tap
if self.acquire_lock():
File "/buildarea/lyang1/poky/scripts/runqemu", line 182, in acquire_lock
lock_descriptor = open(self.lock, 'w')
PermissionError: [Errno 13] Permission denied: '/tmp/qemu-tap-locks/tap0.lock'
(From OE-Core rev: f364f773a0381a75b5992c8c8a1d63a81dbd4422)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There might be a race issue when multi runqemu processess are
running at the same time:
| Traceback (most recent call last):
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 920, in <module>
| ret = main()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 911, in main
| config.setup_network()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 760, in setup_network
| self.setup_tap()
| File "/home/pokybuild/yocto-autobuilder/yocto-worker/nightly-ipk/build/scripts/runqemu", line 697, in setup_tap
| os.mkdir(lockdir)
| FileExistsError: [Errno 17] File exists: '/tmp/qemu-tap-locks'
(From OE-Core rev: ec33043477a0b915b0911f7d7eacb24361e4aaa8)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow access to the snapshot option of qemu to simplify some of our runtime
testing to avoid copying images.
(From OE-Core rev: 8fec4a5a004f0e99734f8c0820c66522d08f213e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We have problems where systems simply stop booting and hang. This is due
to a lack of entropy which means ssh keys and networking can't be brought
up. Adding in the virtio-rng passthrough support allows host entropy to
pass into the guess and avoids these hangs.
This is particularly problematic after the gnutls upgrade which starts
using /dev/random instead of /dev/urandom but was an issue we'd occasionally
seem before that.
It particualrly affected x86 and ppc machines for some reason.
(From OE-Core rev: 51b001909f1856c45cf87091d6e4446c266d5786)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Current qemu instances all share the same MAC address. This shouldn't be an
issue as they are all on separate network interfaces, however on the slight
chance this is causing problems, its easy enough to ensure we use unique
MAC addresses based on the IP numbers we assign.
(From OE-Core rev: c01962bf88786dd84ad83cc1d315297607d29f7c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
testimage.bbclass uses runqemu to execute runtime tests on a qemu
target, this means that bitbake is already running and `bitbake -e`
can't be called to obtain bitbake variables.
runqemu tries to work around being unable to read values for
bitbake variables by inferring the MACHINE from the
DEPLOY_DIR_IMAGE setting, however if a user sets that variable in
a manner which doesn't follow the systems expectations (i.e. if
running `bitbake -c testimage` against a directory of pre-generated
images in a user-specified path) the inferring of the MACHINE name
from the DEPLOY_DIR_IMAGE location will fail.
It's possible that check_arg_machine() shouldn't cause runqemu to
fail and that runqemu should proceed with the user-supplied value
even if it can't be verified. This patch simply ensures that a
workflow where the user sets DEPLOY_DIR_IMAGE continues to work
without changing too much of the runqemu code.
[YOCTO #10238]
(From OE-Core rev: f94ac02f459e2ea0fc471463966997814a67e0ca)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When runqemu is invoked from a running bitbake instance it will be
unable to call `bitbake -e` due to the lock held by the calling
bitbake instance.
Our test code sets an OE_TMPDIR environment variable from which we
can infer/guess paths. Add code to do so when self.bitbake_e can't
be set, much as the sh version of runqemu did.
[YOCTO #10240]
(From OE-Core rev: 1e8165ea2f19aecdc03ccd102ee44ef0544f0f39)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the STAGING_*_NATIVE directories from the config file don't exist
and we're in a sourced OE build directory try to extract the paths
from `bitbake -e`
(From OE-Core rev: 9326af1c20636320c70caecebd47aedafb3f2d25)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When runqemu is started with a *.qemuboot.conf arg assume that image
artefacts are relative to that file, rather than in whatever
directory the DEPLOY_DIR_IMAGE variable in the conf file points to.
(From OE-Core rev: a6448371b87f754def669adfdc01b07d18003405)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, runqemu had hard coded machine knowledge, which limited its
usage, for example, qemu can boot genericx86, but runqemu can't, we need
edit runqemu/runqemu-internal a lot if we want to boot genericx86.
Now bsp conf files can set vars to make it can be boot by runqemu, and
qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf.
Please see qemuboot.bbclass' comments on how to set the vars.
* Re-write it in python3, which can reduce lines from 1239 to about 750
lines
* All the machine knowledges are gone
* All of the TUN_ARCH knowledge are gone
* All the previous options are preserved, and there is a new way to run
runqemu: (it doesn't need run "bitake -e" in such a case)
$ runqemu tmp/deploy/images/qemux86
or:
$ runqemu tmp/deploy/images/qemuarm/<image>.ext4
or:
$ runqemu tmp/deploy/images/qemuarm/qemuboot.conf
* Fixed audio support, not limited on x86 or x86_64
* Fix SLIRP mode, add help message, avoid mixing with tap
* Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to
DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after
stop.
* More bsps can be boot, such as genericx86 and genericx86-64.
* The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to
meta-xilinx' mailing list.
* I can't find any qemush4 bsp or how to build it, so it is not
considered atm.
[YOCTO #1018]
[YOCTO #4827]
[YOCTO #7459]
[YOCTO #7887]
(From OE-Core rev: 60ca8a8d899b90a4693fd62b6ec97d0c76a9f6c5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to direct boot Linux instead of just booting u-boot.
(From OE-Core rev: e5c6a78db46192800669f1b392351f6b52f3e20c)
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For example, support both:
$ runqemu qemux86-64 ramfs
$ runqemu qemux86-64 cpio.gz (new)
(From OE-Core rev: 6529264776701d4f5a1e4a8336ac2e01a6ddea85)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It should be the similar type as hddimg, rather than ext234 or btrfs.
(From OE-Core rev: d5ddc5ec1628c94bd5edc45bc821da1ce616e80f)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* remove akita and spitz related code
They are not supported by runqemu anymore:
$ runqemu spitz
Error: unable to classify arg [spitz]
So remove related code.
* Remove checking of 256M for qemuarm, qemu can check it, for example:
$ runqemu qemuarm qemuparams="-m 1024"
[snip]
qemu: Too much memory for this machine: 1024 MB, maximum 256 MB
[snip]
(From OE-Core rev: 36fb785bf8cd2f387c91d52f597602a5dbc3948b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: 69a1fca4374797dea56035ce56a17441a2ca9280)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #9168]
(From OE-Core rev: 0f8306c77b4ebed1ff127b0786b7109abf0d57cd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
They don't work, and the script can check the type correctly.
(From OE-Core rev: b5cc1e70dbd5df160ddedcaa40d0ab714a307561)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* So that we can add more image support easliy.
* I think that wic should be vm images.
(From OE-Core rev: 82d0014a0e1526ffa1ff7c8ea3903aeae31bada4)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Make it can boot scsi and virtio block drive such as root=/dev/sdX and
/dev/vdX.
* Drop VM from help info, id doesn't work, and the script can check
whether it is a vm disk or not.
* Make it can be run by:
$ runqemu tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.vmdk
or:
$ runqemu qemux86-64 vmdk
[YOCTO #9170]
(From OE-Core rev: 88c081b10902ec52928be78ad320c474bb918e01)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Wic images should be boot as is, without pointing qemu to the kernel
binary. Current code doesn't use kernel, but sets KERNEL variable and
shows kernel path in the console output. This can confuse users.
Changed runqemu and runqemu-internal code to avoid setting KERNEL
variable and show kernel path.
(From OE-Core rev: 474caa7ed5ff05caa5d49d270b283882fa616ed1)
(From OE-Core rev: 35e776e00cce25f2c9c45500612fb66022ec4739)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Quemu should be able to run wic images this way:
runqemu <machine> <image recipe> wic
Tested with 'runqemu qemux86-64 wic-image-minimal wic'
(From OE-Core rev: 8716be799949cb8bde7fa49cbea61312a3a93bb7)
(From OE-Core rev: dd42931bf99b8bbd4ad452b3941d957f41b81796)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The QEMUARCH env variable is not used since commit
"d469c92 classes/imagetest-qemu: remove old image
testing class". Remove it from help message so
it will not confuse other people
(From OE-Core rev: f2f2fa61e2c331409f20c999f93d78ef752b4fd2)
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst qemu doesn't appear to support opening sockets on IPv6 yet, future-proof
the script by just specifying a port and letting qemu work out the rest.
(From OE-Core rev: abf8975bce4bf5d05dbb186d5089f0c3fe07eefb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KVM can be used without vhost so add a new option to runqemu for
use kvm with vhost.
Example,
runqemu qemux86 core-image-minimal kvm # kvm without vhost
runqemu qemux86 core-image-minimal kvm-vhost # kvm with vhost
[YOCTO #7443]
(From OE-Core rev: 7f5f8f87a4180a2b05188047c6a05da5571f94e2)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When the MACHINE variable was set as an environment variable, via
"export MACHINE=qemuarm" and runqemu was executed as "runqemu qemuarm"
The confusing error message appears:
Error: conflicting MACHINE types [qemuarm] and [qemuarm]
This checks if the two values are equal, in that case there is no problem
and execution can continue.
(From OE-Core rev: 6615a21d578ba9ab053ba0b3deab26ebf88e577b)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Giving anything with -image in it as bootparams or in qemuparams (for
example, an additional -drive parameter with an image file or an
"-initrd .../core-image-minimal-initramfs-qemux86.cpio.gz") caused
runqemu to treat these parameters as names of the rootfs image file.
Matching *-image) after checking the current argument for more
specific cases like bootparams and qemuparams avoids this
misinterpretation of the command line parameters.
(From OE-Core rev: 29e0aaa7345ca823bb4af2d4a870e98ac75e04e7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At least the OVFM (UEFI Firmware for Qemu and KVM) recipe stores the BIOS
under $OE_TMPDIR/sysroots/$MACHINE, now defined as OECORE_MACHINE_SYSROOT.
The latter is used when searching BIOS, VGA BIOS and keymaps. As a example,
to boot a OVFM BIOS, one can run the following command:
$ runqemu qemux86-64 core-image-minimal \
biosdir=usr/share/ovmf \
biosfilename=bios.bin \
nographic
Note the bios* parameters: these two are needed to specify the subfolder
(parent folder is OECORE_MACHINE_SYSROOT) and BIOS filename (without it,
it picks a BIOS named bios-256k.bin).
[YOCTO #5654]
(From OE-Core rev: bded344a464bb854db3935da1f6a3320e5aa01e5)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes it possible to boot images with multiple partitions (the
ones ending in .hddimg or .hdddirect) in several ways:
runqemu qemux86 core-image-minimal hddimg
runqemu tmp/deploy/images/qemux86/core-image-minimal-qemux86.hddimg
VM=tmp-glibc/deploy/images/qemux86/iot-os-image-qemux86.hddimg FSTYPE=hddimg runqemu
Same for hdddirect.
This is useful for testing initramfs scripts, secure boot (when
switching to UEFI), or boot loaders like syslinux. For testing the
content of the rootfs, the ext4 image is better because that approach
is faster (no need to create another large image during build, rootfs
can be read directly instead of reading boot.img through loop device).
When booting a live image, the kernel, initramfs (if any) and kernel
parameters are taken from the image by the virtual machine's BIOS, so any
additional kernel parameters given to runqemu are ignored. This can be
avoided (already without this change) in a slightly hacky runqemu setup:
ROOTFS=tmp/deploy/images/qemux86/core-image-minimal-qemux86.hddimg \
FSTYPE=ext4 \
KERNEL=tmp/deploy/images/qemux86/bzImage-initramfs-qemux86.bin \
MACHINE=qemux86 \
runqemu serial kvm nographic 'bootparams=root=/dev/ram0'
The additional bzImage-initramfs-qemux86.bin kernel here was created
by adding this to local.conf:
INITRAMFS_IMAGE = "core-image-minimal-initramfs"
INITRAMFS_IMAGE_BUNDLE = "1"
In the code, the new FSTYPE=hddimg resp. hdddirect behaves almost
exactly like the older vmdk FSTYPE. New types were chosen because it
seemed cleaner than using FSTYPE=vmdk when the actual image pointed to
by VM is not in that format. The downside is that several checks for
FSTYPE=vmdk had to be duplicated for FSTYPE=hddimg.
The VM variable now gets interpreted as "virtual machine disk image"
instead of "vmdk image".
(From OE-Core rev: 37741c539f5d3021e59828b49e968cd42b89a368)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The option was added so that the qemurunner could start a second tcp
serial port without adding machine conditional logic to qemurunner.
The issue that made this necessary was that when "virt" is passed to
qemu-system-aarch64, the normal mechanism for specifying a tcp serial
port does not work. This is because the hardware for the "virt" machine
is hardcoded in the device tree blob and the addition devices must be
virtio devices.
So runqemu can specify virtio for qemuarm64 whereas it seems all other
qemu machines work with the "-serial tcp*" option.
(From OE-Core rev: 849d65d55e4df5fa443b2cb7b4cee23913fc9d5a)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Basically, runqemu script autodetects MACHINE type based on the
kernel image name; if MACHINE name is not specified. Since 'qemuarm'
string is common in both qemuarm amnd qemuarm64 kernel image names, the
MACHINE type is considered as 'qemuarm' even when qemuarm64 kernel
image name is given in command line.
(From OE-Core rev: 388b243668a5c28fb69b760ce9be5adbc85352d8)
Signed-off-by: Jagadeesh Krishnanjanappa <jkrishnanjanappa@mvista.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its not possible to change FSTYPE from the environment but it would
be useful to do so where multiple image types have been generated. This
adds that possibility.
(From OE-Core rev: c210430c24af6717aa955efe1afe9fc4d2d3f2a9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason not to use ext4 at this point, it has advantages
and few drawbacks. Therefore switch the qemu machines over (and the default
runqemu script options).
(From OE-Core rev: 430b9ae71b1aa76f8421127d17e0e0723d4818d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we intend to use a custom BIOS binary file, it would be good to be
able to specify the name of the binary via the -bios option of qemu. The
name of the custom binary could be different from the default name used
by qemu. For instance, it was bios.bin in qemu 1.5.0 and changed to
bios-256k.bin for 2.1.0.
(From OE-Core rev: 29c9e6f44541b7f8731e21e9d1a0adca9da28e37)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update scripts runqemu and runqemu-internal to support to boot
qemuarm64.
(From OE-Core rev: 2f020b53bdb8c262e432bc4df35101fa990c460c)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support to specify a directory for custom BIOS, VGA BIOS and
keymaps as supported by qemu (-L option). Even though this can be
done through qemuparams, having this option provides better user
experience by not having to specify a long and cluttered path along
with other qemuparams that the user might want to specify.
This new options assumes first that the path provided is relative to
OECORE_NATIVE_SYSROOT and will check whether it exists before proceeding.
If not, it will treat the provided path as absolute. This provides
the user flexibility to use BIOS binaries generated inside or outside
the OE build environment.
(From OE-Core rev: d302f5683dd736ac4cd4b601a046d22000d41e68)
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a problem if a relative path is passed to the kernel for NFS usage
that it will not correctly find it, so ensure that the ROOTFS path is absolute.
[YOCTO #2807]
(From OE-Core rev: 5722be0ddda4ec3c96c06b425e5c7e0194326253)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default slirp address for the NFS server is 10.0.2.2. If not
using a tap interface this address must be used or the target system
cannot connect properly. Also the ip=... kernel arguments need to be
set to dhcp when using slirp or the root NFS will not get setup
properly.
The call to cleanup() results in a routine which is not defined when
setting up the NFS because it is called before acquire() for the
locking of the tap interfaces, the solution being to simply not call
cleanup() that early.
When using slirp, kvm should not execute the vhost net checks because
the vhost net will not be configure or used.
(From OE-Core rev: 1ea04d87525f26c2cd32ba29c0f14c6226f60729)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
At the moment, the user cannot to set -vga other then vmware
(because "vmware" is set by default); and the first argument
in qemuparams has higher precedence.
(From OE-Core rev: 54a43397c48c974570e3eade55163eb766994a55)
Signed-off-by: Valentin Popa <valentin.popa@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using a whitelist for image names to default to when none are
specified on the command line is no longer desired. Instead,
choose the most recently created image filename that conforms
to typical image naming conventions.
Fixes [YOCTO #5617].
(From OE-Core rev: 9f69e00200cdbd5ba2e46a54f33c29797816e43f)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing -cpu host option caused kernel panics when people attempted to use
the kvm option. After research and discussion, the best options appear to
be the kvm32/kvm64 cpu types so lets use these instead. These resolve
the kernel issues for me.
[YOCTO #3908]
(From OE-Core rev: bdc6d3be6ffa4ed358153f9c9332b632324f5833)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We want the temporary file to be written in /tmp not the current
directory.
(From OE-Core rev: fcb40c11998030eb5fce89ce5a9ca567870aafa9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When runqemu tries to determine the MACHINE variable from a
kernel or vmdk filename that doesn't contain any known machine
name, the variable gets set to the filename. It should remain
unset and cause an error.
[YOCTO #2890]
(From OE-Core rev: 22c0668d9e0a22c095d78bab7b45ef4f803dd0d1)
Signed-off-by: Mihai Prica <mihai.prica@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to boot the 'qemumicroblaze' machine in
qemu-system-microblazeel
* Use the specific machine model for a MicroBlaze system 'petalogix-ml605'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
(From OE-Core rev: 2c164a5dfc877d180ef58d46c063573621297929)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add support to boot the 'qemuzynq' machine in qemu-system-arm
* Use the specific machine model for Zynq 'xilinx-zynq-a9'
* Use the DTB generated from the kernel build as the DTB for boot
* Force use of initrd rootfs (either in ext or cpio formats)
(From OE-Core rev: 1e4b1d95e1f47654e928f38cd091ffe272689844)
Signed-off-by: Nathan Rossi <nathan.rossi@xilinx.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Handles qemu instances (launch, kill, restart, serial connection, logging)
Launch is blocking until login prompt and returns to the task. A qemu
serial connection is used to save the boot log and get the ip from the image.
Changed runqemu script not to error out when using custom serial option.
(From OE-Core rev: ee7d64dfcc02ba8f568b17d181e0a58d3c810076)
Signed-off-by: Radu Moisan <radu.moisan@intel.com>
Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu script now takes argument "slirp" in order to
run networking on the qemu machine, without root privileges.
changed the runqemu-internal script in order not to activate
the tap devices if the option is set.
[YOCTO #1474]
(From OE-Core rev: fa7fd7b1cbcfbd01af1949d2ea09b880a0ae0175)
Signed-off-by: Andrei Dinu <andrei.adrianx.dinu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-internal is sourced so should be returning with an error code in
case of errors. runqemu needs to deal with this.
This patch fixes up the various error paths so we're consistent and get
a sane exit status for runqemu which helps a lot in its use in the qemu
runtime testing on the autobuilder.
(From OE-Core rev: 753533b2f338ff2ef97eebd5eace7623404ae457)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the qemu is running on a headless machine, a VNC server that only allows
connections from localhost isn't too useful.
Add a "vncpublic" option to bind a VNC server to 0.0.0.0, so it's publically
available.
(From OE-Core rev: 883666821ec46483bbfb9b3cb84c5afa8118a553)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add support for booting an ISO image for runqemu scripts.
[YOCTO #3710]
(From OE-Core rev: edd629029979dc18905fce23b64216f15eea501f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you are using an image in '-serial stdio' mode, temporarily change the
terminal's interrupt character to 'Ctrl-]' for the duration of the image
run. In this way, hitting 'Ctrl-C' for something running in the image
doesn't accidentally abort the entire qemu session.
(From OE-Core rev: 642cfaac0cb515008cfc91aafe04ab1db7a51581)
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Allow vmdk images to be run through the 'runqemu' facility.
(From OE-Core rev: 9efa0aa914cae9e13d90ddf99b482ccf0936573c)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If vhost_net module is not properly installed,
runqemu script will report the error and
provide the user with a link to the guide.
Also corrected small cosmetic issues in
runqemu script messages.
Also removed <> (read/write) check.
Fixes [YOCTO #3184]
(From OE-Core rev: f7365f62325189b0f9a9a1d440f11f2356c8f01d)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
KVM, paravirtualization and virtio drivers are now activated
in runqemu using the kvm option flag for qemux86.
Host CPU features are also exported to guest OS (Yocto Linux).
Usage example: runqemu qemux86 core-image-x11 kvm
Implements [YOCTO #2550].
(From OE-Core rev: a35d03e2eb905de4eadc9c7df5b50bff1fb7f897)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In certain edge cases, bitbake may fail to run and cause setup_tmpdir()
within runqemu to fail, and not give the user a helpful error message.
Catch this case and show the user the output of bitbake -e.
This fixes [YOCTO #3112]
(From OE-Core rev: 465d7b6e66b5a55706535e194b3e44e11ee542c6)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using runqemu with distros outside oe-core then
MACHINE may not be there in local.conf so use the one
thats available in environment of runqemu which is actually
the correct one.
(From OE-Core rev: 5c3fec058a2d370fbb625901ca1822ce04927ac2)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MACHINE/KERNEL Checks setup MACHINE is it's unset, the KVM checks valid
MACHINE is qemux86 or qemux86-64 and fail if it's unset!
[YOCTO #2970]
(From OE-Core rev: 8d5e6999caff50a4b7d9a9ba69f9875285270459)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Expand the usage to be able to specify KERNEL and ROOTFS
on commandline. This helps in using the script for booting
images that are essentially not part of OE-Core
(From OE-Core rev: c985b02130658dd64581ecf14b16e2c70d1d8db5)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The yocto-bsp tool generates kernels with additional strings within
the filename, e.g. zImage-myqemuarm.bin. Loosen the MACHINE detection
regex to work with these filenames.
Fixes [YOCTO #2890].
(From OE-Core rev: 17d616adffc3514b6778acc6ab5d6da34a7366b5)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added support for booting ramfs-based images (e.g, poky-tiny) which
do not have block device support.
This fixes [YOCTO #2612].
(From OE-Core rev: b09c45f017da71ff966004752f8e926ea00ac451)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When gl is disabled in PACKAGECONFIG then we dont need
to check for supporting libs to be present before running
qemu.
(From OE-Core rev: 6612873dc59054e6d37fa7488226218bfb759127)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu can fail to with the following message:
You need libGL.so and libGLU.so to exist in your library path to run the QEMU emulator.
Fedora package names are: mesa-libGL mesa-libGLU.
The libGL.so and libGLU.so files are provided by the mesa-libGL-devel
and mesa-libGLU-devel Fedora packages (yum provides '*/libGL*.so').
(From OE-Core rev: f2b6f9c3a8b4f87b5570b78766a118e4290d773a)
Signed-off-by: Cristian Ciupitu <cristian.ciupitu@yahoo.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New machines need to be added and they also
have different kernel commandlines
(From OE-Core rev: 3a5432aec0faea49d2c04984cd169ceb35bba89f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.
The canonical shell idiom for this is to use case with alternation
and wildcards. As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.
(From OE-Core rev: 716ae8dbd1fb29292c9fca0f59d3807a54508e87)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now runs with dash and busybox' ash as well as with bash
(From OE-Core rev: 2b93ed90736ed08c25561e24343a5ef2b8f7dbef)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I do not have "[[", just "[". Be gentle to users of legacy-free setups,
also by using '=' instead of the double notation.
(From OE-Core rev: e96ba42a977f4c07aa196ce379ecd73e4ddc23c5)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error message erroneously talked about TMPDIR.
Just use OE_TMPDIR everywhere to make the name of the variable obvious.
(From OE-Core rev: 7b633d0a4cf9aa05e6243974bab2b780c246f8ba)
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When passing the nograhic option to the runqemu script, set
console=ttyS0 in the kernel options so the user can view
the kernel boot messages.
This fixes [YOCTO #1475]
(From OE-Core rev: 28f05bf6e5da9cd8f01cff50c317233e3064e3cb)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When qemu build failed, we can see such messages:
You need libGL.so and libGLU.so to exist in your library path and the
development headers for SDL installed to build qemu-native.
Ubuntu package names are: libgl1-mesa-dev, libglu1-mesa-dev and
libsdl1.2-dev
These pkgs have different names on Fedora distributions, and Fedora is
one the
main linux distributions, so add Fedora package names.
The following Fedora versions have these pkgs:
Fedora 9 64bit
Fedora 13 32bit
Fedora 13 64bit
Fedora 16 64bit
[YOCTO #2174]
(From OE-Core rev: 246438582f8a23ce1847bae230bce07fbb3c6d15)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this new emulation, existing qemuppc functionality is maintained
and other functionality such as framebuffer + sato and NFS boot are
added.
(From OE-Core rev: 52ea026df141ea23bbab38ad3a9733c15097eaa4)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If /dev/net/tun is either not present or is not writable by the
user, then show an appropriate error message. (QEMU needs access to this
device in order to enable networking; it may be missing if it is not
enabled or loaded into the kernel, and some distributions such as CentOS
5.x set restrictive permissions upon it.)
(From OE-Core rev: a00b94900d437828f25debce1c30ffcc0bbf29e9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We can't just look for *image* since it will catch up bzimage
(From OE-Core rev: c2f88c658b73da67d93312591b3e67b42f629fe3)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On OpenSUSE within an X session, TMPDIR is set to the system temporary
directory (/tmp) which is incorrect for these scripts. Thus, change
runqemu and oe-setup-rpmrepo to use OE_TMPDIR from the external
environment rather than TMPDIR.
Fixes [YOCTO #1530]
(From OE-Core rev: 4e24c10952c7a52af7f2447595fd484692d35534)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This refactors the way rootfs filenames are auto-detected when you
run the runqemu script without an explicit rootfs filename argument.
It allows the script to use rootfs files generated by hob, and when
there are mutliple rootfs files to choose from, it will pick the
most recently created one.
Fixes [YOCTO #1437].
(From OE-Core rev: 094453f443ed592d814dfb4182a0a02f0a2552e4)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Commit 993672fa2739794a6dd0dbd7bb232fa60522b897 removed the BUILDDIR
support from runqueue which broke the imagetest-qemu integration. We now
therefore need to set TMPDIR and pass this through the environment to
ensure the runqueue script finds the right locations without running
bitbake directly.
This patch also adds a sleep to the qemu command in the error case so that
this remains on the screen for a period of time so the user can see errors
more easily.
This change unbreaks automated testing failures on the autobuilder.
(From OE-Core rev: de470333dbdeea444199340e4cd458c13fed6a5a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old manner of specifying custom options to QEMU in this script
using angle brackets was a frequent source of confusion. Meanwhile,
Otavio Salvador added a decent method of specifying custom kernel
boot options to this script. This patch documents the bootparams
option and adds a similar way of specifying custom QEMU options
using qemuparams="".
This fixes [YOCTO #1019]
(From OE-Core rev: 1038df14a96d789b3f9e9e1692305ba1fea67886)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because unfs boot mode is unstable for qemuppc, disable
it temporarily.
(From OE-Core rev: 74ff1bc8c248824116ba4b787b10fa6ee0c13ce1)
Signed-off-by: Liming Wang <liming.wang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On e.g. Debian libql is found under /usr/lib/x86_64-linux-gnu/libGL.so.
Use a wildcard to match different locations, as uname -i only return unknown on Debian.
(From OE-Core rev: 66e34066a0ac71f4212824b1e6353a4d323f4e21)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
location of libGL has moved in ubuntu 11.10
so we look for it in the new locations
(From OE-Core rev: 8d80918995a15663db7cc9c0683d45ee8ba7d45c)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the grep regexp matches any occurance of
'TMPDIR=' but if you have another variable defined
e.g. OE_BUILD_TMPDIR=xxx then that gets picked up
too.
$ bitbake -e | grep TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
OE_BUILD_TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x"
So we become a bit more stringent and look for
line starting with TMPDIR
$ bitbake -e | grep ^TMPDIR=\"
TMPDIR="/home/kraj/work/angstrom/build/tmp-angstrom_2010_x-eglibc"
make sure that it greps
only TMPDIR=xxx occurance and not values of other variables
whose names happens to end with TMPDIR
(From OE-Core rev: 12ddf6c6a7559d97d9b8f84fcc89ed02e30df85d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Invoking runqemu outside of the build directory for an
in-tree setup results in an empty TMPDIR because bitbake -e
cannot be run to find it.
A symptom of this problem is running runqemu and getting the
following error:
Error: Unable to find tunctl binary in <directory>
Catch this case and report the error to the user.
This fixes [YOCTO #1278]
(From OE-Core rev: ab5544ac801a976b56468ade0f5d2e95c11feb87)
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The old standard of using /home/anders/openembedded-core/build/tmp as TMPDIR do not work any longer,
as - is appended to the real TMPDIR. Thus, always take TMPDIR from
bitbake, unless TMPDIR is set in the environment.
(From OE-Core rev: 993672fa2739794a6dd0dbd7bb232fa60522b897)
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This merges the functionality of the runqemu script into poky-qemu.
It also removes the requirement to order command line args to poky-qemu
in any particular order.
This fixes a slew of runqemu-related bugs by making the runqemu script
obsolete (and fixing the issues in the new poky-qemu), including
[BUGID #294] [BUGID #295] [BUGID #371] and [BUGID #324].
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
The poky-qemu-ifup script now requires a path to the native
sysroot as an argument. This fixes a case where the argument
was missing.
Also, set up NATIVE_SYSROOT_DIR when running runqemu.
Signed-off-by: Scott Garman <scott.a.garman@intel.com>
You need to first set up the build directory by sourcing the poky build script,
after that builds can be run in that directory so long as bitbake is in $PATH
removing the need to source the init script for each build.
i.e:
$ . poky-init-build-env ~/my-build
$ bitbake some-image
<<later, in a different shell>>
$ cd ~/my-build
$ export PATH=/path/to/bitbake/bin:$PATH
$ bitbake an-image
This patch also removes use of OEROOT in recipes, etc.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
For mips, the malta platform emulates a cirrus chipset. With the udpated
2.6.34 kernel options, we can now enable framebuffer boot for
the qemumips platform.
We need to pass a valid cpu (603e) and do a -nographic boot to
make it all the way to a prompt so graphics is disabled for now
for ppc.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Fix typo in help message (we default to ext3 not ext2 now)
and a typo whereby moblin-image-sdk wouldn't be autofound.
Signed-off-by: Joshua Lock <josh@linux.intel.com>
