The patch fixes an issue in laying out extended and logical partitions
by wic. The original code produced disk images in which the size 3rd
partition as described in MBR was incorrect. Depending on the type of
file system used for that partition and size of the partition, it would
be impossible to mount the partition correctly. For instance, kickstart
file in which the 3rd partition had size of 1GB and used ext4 fs, would
result in an image with an umountable partition. The root cause is
reservation of sectors for EBR through stealing of last sector from the
last primary partition.
(From OE-Core rev: a8b85f7878726503dbfa2e9ea86bd6fd961bf03b)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without 'branch' in the SRC_URI, a SRCREV specified for a non-master
KBRANCH will result in a fetch failure since the branch tested by the
fetcher will default to master, which doesn't contain the SRCREV.
This fixes the problem by adding branch=KBRANCH to the SRC_URI.
Fixes [Yocto #6518].
(From meta-yocto rev: 29a36d4c1146f38b4d204b5b4b89bd002074d47d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The /conf dir for arm was missed when committing the changes for the
'removing strange characters' patchset; this restores it.
(From meta-yocto rev: 0fe51b37c32569bd5a3e24c43dc4d16ab7b6d4e9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If tap0 interface has been created by other users on the system, we would
get error messages when using runqemu. Error messages are like below.
Acquiring lockfile for tap0...
touch: cannot touch ‘/tmp/qemu-tap-locks/tap0.lock’: Permission denied
/buildarea2/chenqi/poky/scripts/runqemu-internal: line 139: /tmp/qemu-tap-locks/tap0.lock: Permission denied
flock: 8: Bad file descriptor
The system can still boot up because runqemu would try to create a new tap
interface. So the error message above is harmless, yet somewhat annoying.
This patch fixes the above problem. With this patch, the output would be as
follows.
Acquiring lockfile for tap0...
Acquiring lockfile for /tmp/qemu-tap-locks/tap0.lock failed
Setting up tap interface under sudo
Acquiring lockfile for tap1...
Running qemu-system-arm...
(From OE-Core rev: 039c57257c4180b0688fc2ec1b03948276009b04)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a versioned recipe filename is specified, replace the version in the
value of S with ${PV} just as we do with SRC_URI to make future upgrades
of the recipe easier.
(From OE-Core rev: 0b3c81ed5bcce9b608c4f804496d769288fe8c04)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If an error occurs, set an error exit code so the world knows about it. This fixes
issues where the autobuilder doesn't notice these failures.
[YOCTO #7265]
(From OE-Core rev: b219377defc9517af360986352bd7da1a7906f10)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support defining the top commit up to which to update. In other words,
this makes it possible to update up to certain point other than the
branch head. The update point (git commitish) is given on the command
line by appending the component name(s) with a colon and the commitish,
e.g.
$ combo-layer update my_component:sha1
Only the "update" action supports this.
(From OE-Core rev: b7ee7cf5bbfd0f305a75e4df9455f9968aa67878)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Change get_repos() to assume a list of repository names instead of full
list of command line arguments.
(From OE-Core rev: d2d8f3c2a7570bb74db713ddc83059d3b3bd4b2e)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is required for python code using 'with' statements.
(From OE-Core rev: 27dbacdb88ee3e79f4c95a779d8a7e8c5c8f941d)
Signed-off-by: Philip Tricca <flihp@twobit.us>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This uses a standalone python script named `pythondeps` which now lives in
scripts. It supports scanning for provided packages and imported
modules/packages, the latter via the python ast. It's not perfect, and
obviously conditional imports and try/except import blocks are handled
naively, listing all the imports even if they aren't all used at once, but it
gives the user a solid starting point for the recipe.
Currently `python_dir` from setup.py isn't being handled in an ideal way. This
is easily seen when testing the python-async package. There, the root of the
project is the async package, so the root has __init__.py and friends, and the
python provides scanning currently just assumes the basedir of that dir is the
package name in this case, which is not correct. Forthcoming patches will
resolve this.
(From OE-Core rev: cb093aca3b78f130dc7da820a8710342a12d1231)
Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase memory to 512M for qemuarm64. The original size 126M can't make
task testimage pass, neither 256M.
[YOCTO #7102]
(From OE-Core rev: 93979b2d025cf318fd0d867ed730721c7594d33b)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
MMC block device partitions are named differently than other block
devices and use the scheme: mmcblk<devnum>p<partnum>, ex: mmcblk0p1,
mmcblk0p2. The current code generates incorrect parition names missing
'p' infix for fstab entries. The patch resolves this problem.
(From OE-Core rev: e2664f563921467fe38bb74f4dd2a41eb004ee9f)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This brings qemuarm64 into feature parity with the other qemu machines
and enables the automated testing on the autobuilder.
(From OE-Core rev: 31e259f2f2a83c26b8a62b6d7dbca010c6db16bf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update scripts runqemu and runqemu-internal to support to boot
qemuarm64.
(From OE-Core rev: 2f020b53bdb8c262e432bc4df35101fa990c460c)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding argparse module from Python's standard library. The module has replaced
previous python-argparse package that was build using source that are not part
of Python 2.7 release.
(From OE-Core rev: 198c67c2f9407f9c36127ff5a0778ed981778410)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deploy recipe output files to live target machine using scp
Store the files list and target machine info in localhost if deployment
is done
Undeploy recipe output files in target machine using the previous
deployment info
[YOCTO #6654]
(From OE-Core rev: cc10751aa3121218b21ec2058358f3ea02a4500a)
Signed-off-by: Junchun Guan <junchunx.guan@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provides an easy means to work on developing applications and system
components with the build system.
For example to "modify" the source for an existing recipe:
$ devtool modify -x pango /home/projects/pango
Parsing recipes..done.
NOTE: Fetching pango...
NOTE: Unpacking...
NOTE: Patching...
NOTE: Source tree extracted to /home/projects/pango
NOTE: Recipe pango now set up to build from /home/paul/projects/pango
The pango source is now extracted to /home/paul/projects/pango, managed
in git, with each patch as a commit, and a bbappend is created in the
workspace layer to use the source in /home/paul/projects/pango when
building.
Additionally, you can add a new piece of software:
$ devtool add pv /home/projects/pv
NOTE: Recipe /path/to/workspace/recipes/pv/pv.bb has been
automatically created; further editing may be required to make it
fully functional
The latter uses recipetool to create a skeleton recipe and again sets up
a bbappend to use the source in /home/projects/pv when building.
Having done a "devtool modify", can also write any changes to the
external git repository back as patches next to the recipe:
$ devtool update-recipe mdadm
Parsing recipes..done.
NOTE: Removing patch mdadm-3.2.2_fix_for_x32.patch
NOTE: Removing patch gcc-4.9.patch
NOTE: Updating recipe mdadm_3.3.1.bb
[YOCTO #6561]
[YOCTO #6653]
[YOCTO #6656]
(From OE-Core rev: 716d9b1f304a12bab61b15e3ce526977c055f074)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a utility module for scripts. This is intended to provide functions
only really useful before bitbake has been found (or only of particular
interest to scripts). At the moment this includes functions for setting
up a logger and for loading plugins.
(From OE-Core rev: a8f90528981127fbace3e901c6e3dfe8b45b98ab)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a more maintainable and flexible script for creating at least the
skeleton of a recipe based on an examination of the source tree.
Commands can be added and the creation process can be extended through
plugins.
[YOCTO #6406]
(From OE-Core rev: fa07ada1cd0750f9aa6bcc31f8236205edf6b4ed)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding glob support for entries in IMAGE_BOOT_FILES. Files picked up by
glob are by default installed under their basename, as this is likely
most common use case. Target name for globbed entries specifies the
name of directory in which files will be installed withing the partition.
(From OE-Core rev: 2c9635bdb97ddc80750c11d356e153a99d61cf09)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Check for malformed entries in IMAGE_BOOT_FILES, fail early if such
entries were found.
(From OE-Core rev: e56072aaaad6cfa222853a4e9e68dd8aa861de18)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the x86_64 templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: d478b11db66795040009e9b7d7751300d4385018)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the yocto-layer templates, give all the 'strange' template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: 0aa76b36ccb8262a7eec62845361c3d4b73ceb46)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the powerpc templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: c21329385f93bd876ef675ee453627910b4d5dec)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the mips64 templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: 8bc26cbfe2da0d6ffd08ecdce36fd50622bb1fad)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the arm templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: fb533fd98678671d319e52fc288783bbd0368218)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the mips templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: afa61438aa31fbc5c87991c8b3ec88c228b9d2d1)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For the x86 templates, give all the 'strange' yocto-bsp template
filenames 'normal' names, adding new yocto-bsp-filename and
yocto-bsp-dirname tags for the new filename processing pass where
needed.
(From meta-yocto rev: 9fa30ad9cf1291a37d365515ec8d969fb4fd4aef)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Give all the 'strange' yocto-bsp template filenames 'normal' names,
adding new yocto-bsp-filename and yocto-bsp-dirname tags for the new
filename processing pass where needed.
(From meta-yocto rev: c66a5b2acb2e243b857e5eb31c1427af296b4c9d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Operating systems that can't handle filenames containing anything but
uppercase letters don't like to see 'strange' characters in filenames
such as the file and directory names yocto-bsp uses as part of its
templating mechanism. To fix this, we essentially add another level
of metadata into the template files themselves rather than into their
names, and add a processing pass that internally gives us what we had
before. Specifically:
- strange characters in filenames are moved inside the files they
apply to, to the first line of the file prepended with '#
yocto-bsp-filename {{...}} filename | this'
- strange characters in directory names are moved inside a new file
of the same name but ending in .noinstall and with the first (and
only) line of the file prepended with '# yocto-bsp-dirname {{...}}
dirname'
If the new filename contained in the yocto-bsp-* tag is 'this', the
filename is the existing name of the file. For a dirname, this would
be the filename with .noinstall removed.
"Fixes" [YOCTO #5312].
(From meta-yocto rev: 3dad2decbd682713f717950fc39fa0f63f1b8c98)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added additional runtime dependencies for python3-core needed
to run the interpreter with a minimal install (codecs,io,math,reprlib).
Created python3-reprlib package to avoid getting python3-misc bringing
lots of unneeded libraries.
Fixed FILES-python3-core, missing _sysconfigdata, renamed copyreg
undetected before due to previously needed installation of python3-misc.
[YOCTO #6967]
(From OE-Core rev: bafdfb28726d0a9b30b8283b2472727e8208059d)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A piece of JSON initialization code that runs when you "import json"
tries to use the hex-decoder, thus breaks if you do not have
python-codecs installed. Example:
>>> import json
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/json/__init__.py", line 108, in <module>
from .decoder import JSONDecoder
File "/usr/lib/python2.7/json/decoder.py", line 24, in <module>
NaN, PosInf, NegInf = _floatconstants()
File "/usr/lib/python2.7/json/decoder.py", line 18, in _floatconstants
_BYTES = '7FF80000000000007FF0000000000000'.decode('hex')
LookupError: no codec search functions registered: can't find encoding
This patch adds a runtime dependency on python-codecs for python-json and
re-generates the python manifests for Python v2.7. Solves [YOCTO #7020].
(From OE-Core rev: 90fd48144f146f455b18372a9b061314ab3a3857)
Signed-off-by: Magnus Olsson <magnus@minimum.se>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix this ssl import error:
Python 2.7.3 (default, Dec 5 2014, 16:24:17)
[GCC 4.9.1] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import ssl
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/lib/python2.7/ssl.py", line 92, in <module>
import base64 # for DER-to-PEM translation
ImportError: No module named base64
(From OE-Core rev: dfa34e70a4c7543dc67835c2e9a270ccd011ac72)
Signed-off-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mips64 support was recently added to the core BSPs; we should also
support it in yocto-bsp. [YOCTO #5314]
(From meta-yocto rev: 3f3d29e2df6462c915d0763ab07f3be3c739ca4d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This field is now internal and won't be seen.
(From OE-Core rev: b1e02de02b3e0e83d003d0030b97da06abcdfe87)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To support yocto on systems with python3 as default version, scripts
should use /usr/bin/env python in the shebang, as this allows the use of
a fake env to mimic python2 as default version.
This patch simply replaces occurrences of #!/usr/bin/python with
#!/usr/bin/env python and was done with this oneliner:
git grep -lE '^#!/usr/bin/python' | xargs \
sed -i 's|/usr/bin/python|/usr/bin/env python|'
(From OE-Core rev: 6d3de22a19657a413e01d7bb5fd74d16c00dc696)
Signed-off-by: Martin Hundebøll <martin@hundeboll.net>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update bootimg-partition to use bootimg_dir instead of img_deploy_dir,
to match similar usage in other plugins.
As mentioned elsewhere, plugins should use the passed-in value for
bootimg_dir directly if non-null, which corresponds to a user-assigned
value specified via a -b command-line param, and only fetch the value
from bitbake if that value is null.
(From OE-Core rev: 3822f8a7b33da56ecd9144b4bcae50734fb1af81)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The first iterations of wic very shortsightedly catered to two
specific use-cases and added special-purpose params for those cases so
that they could be directly given their corresponding boot artifacts.
(hdddir and staging_data_dir).
As more use-cases are added, it becomes rather obvious that such a
scheme doens't scale, and additionally causes confusion for plugin
writers.
This removes those special cases and states explicitly in the help
text that plugins are responsible for locating their own boot
artifacts.
(From OE-Core rev: 6ba3eb5ff7c47aee6b3419fb3a348a634fe74ac9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 7ce1dc13f9.
This patch broke the assumption that a non-null boot_dir means a
user-assigned (-b command-line param) value.
Reverting doesn't break anything, since the case it was added for
doesn't use the boot_dir for anything except debugging anyhow.
Fixes [YOCTO #6290]
(From OE-Core rev: db90f10bf31dec8d7d7bb2d3680d50e133662850)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The --debug option is missing from the wic help text; this adds it and
at the same time rearranges the usage into a more logical arrangement.
(From OE-Core rev: cf5144ef241d8f4ccaa3461ae5c9f89c2cf2f8d1)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When creating partitions sized to given rootfs directories, filesystem
creation could fail in cases where the calculated target partition
size was too small to contain the filesystem created using mkfs. This
occurred in particular when creating partitions to contain very large
filesystems such as those containing sdk image artifacts.
This same limition is present in the oe-core image creation classes,
which can be readily see by changing IMAGE_OVERHEAD_FACTOR from the
default 1.3 to 1.0 and building a sato-sdk image.
It should be possible to calculate required sizes exactly given the
source rootfs and target filesystem types, but for now, to address the
specific problem users are hitting in such situations, we'll just do
exactly what oe-core does and define and use an IMAGE_OVERHEAD_FACTOR
or 1.3 in those cases.
Fixes [YOCTO #6863].
(From OE-Core rev: bbaef3ff5833fc1d97b7b028d7770834f62789da)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The return code from the mkfs command used by the partition creation
command was being ignored, allowing it to silently fail and leaving
users mystified as to why the resulting filesystem was corrupted.
This became obvious when failures occurred when creating large
e.g. sdk filesystems [YOCTO #6863].
(From OE-Core rev: 8cef3b06f7e9f9d922673f430ddb3170d2fac000)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While syslinux not existed in $bootimg_dir, there was a error:
$ wic create directdisk -e core-image-minimal
...
|Creating image(s)...
|Error: exec_cmd: install -m 444 /home/jiahongxu/yocto/
build-20141010-yocto/tmp/deploy/images/qemux86-64/syslinux/
ldlinux.sys /var/tmp/wic/build/hdd/boot/ldlinux.sys
returned '1' instead of 0
...
Add checking for the existance of syslinux to fix this issue.
If syslinux didn't exist in anywhere, prompt user to build it.
[YOCTO #6826]
(From OE-Core rev: c2d4364d9fbbda64598f0a3eb0b0890932bb7742)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In some situations where a proxy is required the client can't even do DNS
lookups, so instead of using SOCKS4 use SOCKS4a which moves the name resolution
from the client to the proxy.
(From OE-Core rev: 984455a95b4302d527ff54e019d8ed00611f3664)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add kickstart for generating a SD card image that should cover most use
case scenarios. The layout is as follows:
- 16MB vfat partition that IMAGE_BOOT_FILES will be copied to, 4k
alignment
- ext4 rootfs, 4k alignment
(From OE-Core rev: bb01a6be7b32aa675f5003a6012a60a081212e8c)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch implements 'bootimg-partition source plugin class for 'wic'. The
plugin creates an image of boot partition, copying over files listed in
IMAGE_BOOT_FILES bitbake variable.
(From OE-Core rev: 4a3200d710d953956064c28188577fbd461d093d)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Running wic with -e to use artifacts from a named image, bootimg_dir was
always passed as empty string to partition source plugins. The patch
sets bootimg_dir to current value of DEPLOY_DIR_IMAGE, as bootloader
artifacts end up in that location as well.
(From OE-Core rev: d7f69e6f0932a927b6ce289fb47ba575d7aaa1c8)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
VFAT rootfs partitions sector count would get updated always even if
there is no need. Since parition size in wic is expressed in MB, any
sub MB change will cause the generated partition image to be larger
than allocated space within the disk image. Fortunately, partitions
sized in MB will most of the time have a proper sector count.
(From OE-Core rev: 99bee4cb489800d74dea4d2158ff834413685f04)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Functions for generating rootfs use IMAGE_EXTRA_SPACE rather than
BOOTDD_EXTRA_SPACE. The latter is used in boot image source plugins.
(From OE-Core rev: 44abf447f8e4ed11cbbe53a4fb0ecf10a20f0f9e)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I've been giving things some thought, specifically why sstate doesn't
get used more and why we have people requesting external toolchains. I'm
guessing the issue is that people don't like how often sstate can change
and the lack of an easy way to lock it down.
Locking it down is actually quite easy so patch implements some basics
of how you can do this (for example to a specific toolchain). With an
addition like this to local.conf (or wherever):
SIGGEN_LOCKEDSIGS = "\
gcc-cross:do_populate_sysroot:a8d91b35b98e1494957a2ddaf4598956 \
eglibc:do_populate_sysroot:13e8c68553dc61f9d67564f13b9b2d67 \
eglibc:do_packagedata:bfca0db1782c719d373f8636282596ee \
gcc-cross:do_packagedata:4b601ff4f67601395ee49c46701122f6 \
"
the code at the end of the email will force the hashes to those values
for the recipes mentioned. The system would then find and use those
specific objects from the sstate cache instead of trying to build
anything.
Obviously this is a little simplistic, you might need to put an override
against this to only apply those revisions for a specific architecture
for example. You'd also probably want to put code in the sstate hash
validation code to ensure it really did install these from sstate since
if it didn't you'd want to abort the build.
This patch also implements support to add to bitbake -S which dumps the
locked sstate checksums for each task into a ready prepared include file
locked-sigs.inc (currently placed into cwd). There is a function,
bb.parse.siggen.dump_lockedsigs() which can be called to trigger the
same functionality from task space.
A warning is added to sstate.bbclass through a call back into the siggen
class to warn if objects are not used from the locked cache. The
SIGGEN_ENFORCE_LOCKEDSIGS variable controls whether this is just a warning
or a fatal error.
A script is provided to generate sstate directory from a locked-sigs file.
(From OE-Core rev: 7e14784f2493a19c6bfe3ec3f05a5cf9797a2f22)
(From OE-Core rev: 884d4fa3e77cf32836f14a113c11489076f4a84d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous commit, 'wic: Remove 3rdparty/urlgrabber' didn't actually
remove all references to urlgrabber - this does however.
(From OE-Core rev: b4367af770611174d9de82c63c697d4347e30dcf)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed:
- Remove PR. We don't need the "PR = r0" in the bb file.
- Function length can't get the array's size correctly.
Should use function scalar.
(From OE-Core rev: efb9f9f1d9a85a22991f99277f77b87784762cbb)
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The change prevents additional realignment of already aligned
partition. Previously, even already aligned partitions would be pushed
forward by the amount of --align.
(From OE-Core rev: 92a1b83d928173a58280ca019ca81fdeb5ba72b5)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to make up for space loss due to overhead located before the
first partition, same amount of bytes was extracted from the first
partition's size. This leads to unexpected change of first partition's
size, and is not matched by similar adjustment at the time the partition
image is generated. Thus it is possible that the first partition may
partially overwrite contents of the following partition, as the
partition image is larger than the allocated space.
This is also problematic on certain platforms such as OMAP, where the
first partition is required for have an even number of
sectors (typically already expressed by --size in kickstart
file). Subtracting an odd number of sectors lost for overhead, leads to
an odd number of sectors assigned for partition, preventing the board,
such as beaglebone, from booting correctly.
(From OE-Core rev: c3251d4191fb0b7c3477a3579e542729598f6aad)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not including the label image but having multiple partitions of the same
type, the image file of one partition would overwrite the other.
(From OE-Core rev: acf2fb7c6dfa3217ffcbf9483c190057d9f41bbf)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the same as mkefidisk but uses gummiboot instead of grub-efi.
(From OE-Core rev: 5979409ebfab0bb07b3c2b2fcf14a722c441f07b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootimg-efi plugin now requires a loader param, so supply it to
retain existing behavior.
(From OE-Core rev: ccef1385cb51ce2b9b75493b314e38599a8ae10e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add gummiboot support to bootimg-efi, which retains the existing
grub-efi support (though requires an update to the .wks file).
(From OE-Core rev: f1a81fcefa493540a9faac549fdd513b86f8f497)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add code to parse the sourceparams and pass them to the partition
plugin methods.
(From OE-Core rev: 769a6f920fb672c50d76bd4bdea4a65fdc18a7b3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Parses strings of the form key1=val1[,key2=val2,...] and returns a
dict. Also accepts valueless keys i.e. without =.
(From OE-Core rev: 36f258ee6e60c26fd44b9bc71c318363cec71f42)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To go along with '--source' as a way to parameterize source plugins.
(From OE-Core rev: f5b9ef65453b3f66282c49f5e2584ad33ac6d2d7)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* strip tmpdir prefix, so that we have shorter paths which aren't
builder specific
* use '#' for regexp delimiter so that we don't need to prefix
forward slashes in paths
* extend default whitelist to cover typical cases
* add parameter for external whitelist file
* use number of found paths as return code, so that CI can easily
report error when new untracked files are found
* use .txt suffix for all output files, so that they can be easily
viewed in browser
* add populate_sysroot task, because somewhere between dora and daisy
the populate-sysroot files in sstate-control were renamed to have
underscore instead of dash
* only few entries not covered by this default whitelist were found
in world build (but I'll leave these for people to whitelist, because
they are not generated in most builds)
* [^/]*/home/builder
home directory from meta/recipes-graphics/builder/builder_0.1.bb
* [^/]*/usr/src/kernel/patches
* [^/]*/usr/lib/gdk-pixbuf-2.0/.*/loaders.cache
3 places are using this, not sure which one creates it
meta/recipes-gnome/gdk-pixbuf/gdk-pixbuf_2.30.8.bb:
GDK_PIXBUF_MODULE_FILE=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/${LIBV}/loaders.cache
meta/recipes-gnome/gtk+/gtk-update-icon-cache-native_3.4.4.bb:
GDK_PIXBUF_MODULE_FILE=${STAGING_LIBDIR_NATIVE}/gdk-pixbuf-2.0/2.10.0/loaders.cache
scripts/postinst-intercepts/update_pixbuf_cache:
>$GDK_PIXBUF_MODULEDIR/../loaders.cache && \
sed -i -e "s:$D::g" $GDK_PIXBUF_MODULEDIR/../loaders.cache
(From OE-Core rev: b1bfec63949e16abe8c11c34530dfbfb176c04cd)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This represents a complete rework, and if we assume the previous
version should have been 1.0 (instead of a silly .1x version), then
this should be 2.0.
(From OE-Core rev: d263cb055333e6432454a13403eda471c514a3e6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As well as any other stray instances of mic in the codebase that can
be removed.
We don't really need to carry around legacy naming, and the history is
in git.
(From OE-Core rev: 598b120406dc1d2b7e377bd1ab6f0acbef034b22)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't mount anything, so can't have a mount error; rename it to
something more appropriate.
(From OE-Core rev: e1edee656fc9c0a791c0eb62796d1afa483be34e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's actually a container for disks and partitions, and wic doesn't
mount anything, so rename it to match what it really is.
(From OE-Core rev: 28c5249b4df46ba3ac227d0c4dc6e545b40dbaf3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic code inherited a basic image-creation flow based on
image-configuration, but wic doesn't actually configure anything, so
rename parts of the code dealing with configuration to something more
appropriate.
(From OE-Core rev: 58dc8879bba31542e2386aaaa70034621b2b1e4e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic code inherited a basic image-creation flow based on installing
packages, but wic doesn't actually install anything, so rename parts
of the code dealing with installing to something more appropriate.
(From OE-Core rev: b4232041534a79236eb8d8ab5c0024a0ef4da649)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic code inherited a basic image-creation flow based on mounting
loop devices, but wic doesn't actually mount or unmount anything, so
get rid of unmount() and consolidate whatever it did do with
cleanup().
(From OE-Core rev: 1b103bf4a7c7527d4fc57bad1bbd1d5a5bbddb4a)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic code inherited a basic image-creation flow based on mounting
loop devices, but wic doesn't actually mount anything, so rename parts
of the code dealing with mounting to something more appropriate, and
remove related unused code.
(From OE-Core rev: 94e15c18c011b0d7d71276cd4566be2417c2c6be)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't do anything we need, so remove it and fix up callers/base
classes.
(From OE-Core rev: fb2a162d8756ab69c9c29a0715b033f18620341d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also fix up users such as imager functions.
(From OE-Core rev: eb77b9c11bd9b8dc90aacfbd5b5bc5568a233525)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove help text regarding the source and future intentions of the wic
codebase, since the code prompting those comments has now been mostly
removed.
(From OE-Core rev: dfa8626700269141f8d2f5be12c8758db7ca6473)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default is F16 and there's no reason to change that, so remove
everything else.
(From OE-Core rev: e0ec12d012e568c9943614fc1190c143912180b3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use a lot of Creator, so remove it.
(From OE-Core rev: ef6bc7a3b58ba8b9c94f4c1e41c0f6d7d51c0bf5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use a lot of ParitionedMount, so remove it.
(From OE-Core rev: 0f793ff0767b0cce032c20b677974806c65610d6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove what wic doesn't use from DirectImageCreator.
(From OE-Core rev: dbbe6d04f6c606c94ff17151aee1214e4e24ce7d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use a lot of BaseImageCreator, so remove it.
(From OE-Core rev: 6bd95c24b44fa80ac9d5950bf2d925f18f671290)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: b818e5a1ed047940fda533da73fc50a099e1aa3f)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't currently use it, so remove.
(From OE-Core rev: d3a490d5421405bf9e002c6c65ffb831ea6b767e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use anything but partition and bootloader, so remove the
rest.
(From OE-Core rev: b6ae106b5d28180a5890e837c87f3e91e5917638)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: 00dcdb29c89634ab267d328eb00f8eb70c696655)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: 84e1e13ce3af216e304f61c7ea6e5e9338f94bc6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: e18d5393a556e1ff4826c1e5b1a75f4ac998b10e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: a49b39ddf18b1b058c0a892e1a7450239eea66ce)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use proxy support, so remove it.
Also remove anything related to proxies in misc and conf, and while
we're at it, remove all the obviously unneeded code from those files -
it's easier to just remove it than to figure out the callchain to the
proxy code usages.
Basically the extra stuff relates to packaging, images, and config
files we don't use.
(From OE-Core rev: 041f9e2ca52681cd6f5c2fb804dd45f05358c9f9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't need to grab any urls, so remove it.
(From OE-Core rev: 55f8df07d82724b6d7ed694158ca6e9a5266cbc4)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: b732ad616ca20dfc4adb845b68ae3378624a0a4d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use it, so remove it.
(From OE-Core rev: 69f16c7582660a3bcf4106668e548b4c789ae251)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
wic doesn't use the yum or zypp package managers, remove them.
(From OE-Core rev: ef70b961b6b8f3a004036f84b608665db2085215)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More package-related stuff we don't need.
(From OE-Core rev: 167cb99af427510bb6d72e89478c62a804db125c)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
mic chroot allows users to chroot into an existing mic image and isn't
used by wic, so remove it.
Removing chroot.py leads in turn to various plugin-loading failures
for a number of plugins that wic doesn't use either, so remove those
as well.
The existing source plugins refer to chroot but don't use it, so fix
those up.
(From OE-Core rev: d73230306b827972cdc99f21d247c54d5d7c0b6d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove commands related to repos, packaging, configuration
(From OE-Core rev: 2b002ab75473578f06f161be0b48670fba26994e)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The reason exec_cmd() warns but doesn't error out (broken parted)
doesn't really make sense, since the parted invocations don't even use
exec_cmd(). It really should just fail since by not doing so it's
actually enabling invalid images in some cases.
Also, since the return code is now always zero, there's no point in
having a return code, so remove it. This represents a change in the
API, so we also need to update all callers.
(From OE-Core rev: a10bbd39eee29cc49d258bf08aaec279c3115c66)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If HTTP_PROXY or http_proxy is set when the send-error-report script
is run, it will check to see if fetching / on the specified server
returns 200 without the proxy set. If it does it will assume that the
proxy is not needed. However this check can never work because
fetching / always redirects to /Errors/ in the current code and
thus returns code 301. This is fixed by fetching /Errors/ instead of /.
[YOCTO #YB6576]
(From OE-Core rev: af93c89febcd186d7e31f1d15affc15f38e3379d)
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* when dependency changes are reported in OUTPUTC/failed-recipes.log
it can be the same as final output file which is later overwritten
because OUTPUTC == OUTPUT_BASE by default
* use similar format for messages as insane_qa check
(From OE-Core rev: f8c1c20cc4926072ad4578ca609ed40e3b94ef85)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is a set of miscellaneous help text updates noticed while
transcribing wic help for the dev manual.
(From OE-Core rev: d4b350fcdedf29692673e09a0c1850cdbbe29739)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
squashfs support was recently added to wic, so document it.
(From OE-Core rev: c04043e143932fe2ea38f87d2faa8beed007671b)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
--fsoptions support was recently added to wic, so document it.
(From OE-Core rev: e2d87ad57f8aa74e748ba95f6a801a2ca665ecc4)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix various typoes and grammar problems noticed while transcribing for
the dev manual.
(From OE-Core rev: 79fb7d9b5a28810e3adfaf5cba0c2298810253e9)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
DirectImageCreator.__write_fstab() generates new /etc/fstab in sysroot
with rootfs contents. The fstab entries are generated base on the
initialn contents of /etc/fstab, plus any extra (other than / or
/boot) partitions listed in *.wks. A backup of original /etc/fstab is
done in a temp location. Subsequent call to __restore_fstab() restores
the backup copy, replacing the autogenerated one.
Calling __restore_fstab() before Wic_PartData.prepare() brings back the
original fstab before the partition image file actually is created. As
such, the autogenerated /etc/fstab will not make it to the partition.
(From OE-Core rev: a9e59d7b1fa1ed33ce9678fb77a367800d7a8f87)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is possible to instruct wic to create a squashfs partition by setting
--fstype=squashfs in *.wks. For now this is only useable for rootfs
partitions (note that you must have squashfs support in the kernel). An
attempt to create an empty partition will produce a warning.
(From OE-Core rev: 30266a0be946bd0ce76d6920e7afe840c6c3bf80)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add handling of --fsoptions in parition definition. If no options are
specified, 'defaults' is used.
(From OE-Core rev: e91c0db15db74237606fae96c9b7d21936519a86)
Signed-off-by: Maciej Borzecki <maciej.borzecki@open-rnd.pl>
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bootimg-efi plugin specifies the fstype internally, so remove it
from the partition definition.
(From OE-Core rev: e9365e9d9e8a8696849fda182ec260398059089a)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previous patches added help for 'wic kickstart' but forgot to add an
entry in the main help page showing its availability. Add an entry
for it.
(From OE-Core rev: 5aa212f990c3d9b90a4f06cea346b82fc5d376ba)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original move of the mkefidisk code to the bootimg-efi plugin
resulted in a bad hdddir - fix it.
(From OE-Core rev: ab337705521d8734f12be612709e70a163111fe3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add basic signal handling to unmount and remove any temporary files.
Correct a quoting issue with the die() function caught testing signal
handling.
Fix a minor typo in "formatting" output.
(From OE-Core rev: a085cdf0e2dcf6543f61a8bdf68f83bcf8006373)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current script intends to redirect stderr to stdout, but instead
redirects to a file named 1. No doubt a regex replace error.
Replace all instances of 2>1 with 2>&1.
(From OE-Core rev: 1864ca9751c28cca248cfba77a3d23fc58ff43bb)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
My previous patch adding gummiboot support was missing the line to
remove the initrd line from the boot config. This was an oversight in
copying over the grub setup to gummiboot. Add the necessary logic to
remove it.
(From OE-Core rev: c7355550dc21a1ef3c2e828ed5f51e94e12fac5f)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the scripts/lib/scriptpath module in order to standardize the adding of bitbake/lib and meta/lib to sys.path.
(From OE-Core rev: 32c5b31d8a22bb8ba49db8a5c797ad0f421e67a3)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove superfluous output from commands, add a -v verbose flag, and
cleanup output.
(From OE-Core rev: 0742bcd437362eb31b40e35f7331f191a1e070d0)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copying the rootfs is the most time intensive task. Move it last so if
we are to encounter other errors, we do so quickly and error out.
(From OE-Core rev: 38a485aabfb57d42fa4663386c22aa9260d0a944)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently the script will attempt to continue even after a fatal error.
Add a die() routine which will abort in the case of a fatal error and
call a cleanup() routine to unmount any images or devices and remove the
TMPDIR.
Move the variable assignment and directory creation earlier in the
script, making it more obvious what we need to clean up.
(From OE-Core rev: 40fe82fecf7a94b24893862ac17ee2bc749fc5e8)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add logging functions: error, warn, info, and success, using tput to add
color highlighting.
Use these routines throughout the script, replacing echo statements and
adding "|| error" in several places to eliminate silent failures. Add a
simple exit block which checks for issues encountered while running.
(From OE-Core rev: b5a3f6465a7fd8e821b81da053bf7e11535f1652)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than only copying the EFI/BOOT dir, copy the entire EFI dir
recursively. This allows for custom configurations to be enabled
implicitly with no extra work required.
(From OE-Core rev: f6f243bff4fa7c0e876a506a7013c86e0141556c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 6295]
Add gummiboot support for images built using:
EFI_PROVIDER="gummiboot"
Add conditional configuration for GRUB and gummiboot. Provide some
messaging about which is being performed.
(From OE-Core rev: b0c86d8149dffd72d0dbd2451031f30953e36dc7)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide reasonable feedabck if the mount commands fail.
(From OE-Core rev: 07cf8cfb843311d7f868c502d542af51f64d71bd)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid some mkfs warnings by using all caps in the volume names.
(From OE-Core rev: d80d730a5fa84d3a036d1fc8290620e90d5db460)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adding the possibility to skip the download phase completely.
This is useful for repeating runs with the same image types and similar configurations.
(From OE-Core rev: 3cc3f8a069b3d6d895afa6f192b36443b8328f40)
Signed-off-by: Corneliu Stoicescu <corneliux.stoicescu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It doesn't make sense to create zero-sized partitions so assume user
error and notify the user they should be using a non-zero --size for
partitions that don't specify a --source.
(From OE-Core rev: 3231562c3c9f8173ddcc0812001aadf0988c8892)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a 'wic kickstart' help section to make it easy for users to access
the kickstart reference without having to go to an external website.
(From OE-Core rev: 136137ec1c124aee89d2120abded60a5cf0562b0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a general overview of wic to the help system as 'wic overview',
along with some introductory examples.
(From OE-Core rev: fa108caaa53878152e4856d32ce1ab7fe3802287)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add vfat as a supported rootfs type (in addition to the current
ext2/3/4 and btrfs support).
vfat partitions can now be created using --source rootfs along with
--fstype=vfat, or without --source but specifying a --size.
(From OE-Core rev: d9efc110fd73822629b2a3326761f2256b9f23b0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code uses msger.debug() to note errors, effectively
squelching them if --debug isn't used. Apparently this is because it
can return non-zero for some loop device failures. We don't care
about loop devices, and not paying attention to the error code
actually results in invalid images, so error out on parted failures as
we should be.
(From OE-Core rev: b1c68e5446080f0743f7f8a530f3b00f90c8717d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a category for help topics with an initial help topic discussing
source plugins.
(From OE-Core rev: a3dbe46dd28a6fd9e6c21f6bbb6a12578df9dff3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to reuse the existing subcommand infrastructure to display
various general-purpose help topics, add a dummy 'help_topic'
subcommand and usage string. This allows users to invoke general help
topics by the natural form 'wic help <topic>' even though topic
doesn't correspond to a real subcommand.
(From OE-Core rev: d03f39a99058c2393d7b50ac4909bdaa84b09920)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a partition specified in a .wks file specifies a nonexistent
--source, print an error to that effect and exit. The error text also
points the user to a command listing valid sources, and help on adding
a new source plugin.
(From OE-Core rev: 4dff6945d2606cebc0ab26e877c5d8c7b457e179)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add both short and long text for the new 'wic list source-plugins'
command.
(From OE-Core rev: 4f20acc10b18c7353bd73f253943372dacd957ca)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a 'wic list source-plugins' command enabling users to get a list
of valid partition --sources. This is useful not only for determining
sources to use in .wks partition statements, but also for making sense
of errors in .wks partition processing.
(From OE-Core rev: 37db9423e7872012fabde67e8858db5b512832f6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been copied and pasted around and is not needed, simply drop it.
The defaults in the recipe work just fine.
(From meta-yocto rev: 037bce9a5f196df3cded9dfe6200188c1dd1d84a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update qemu tune definitions to match changes in main qemu machines.
[YOCTO #6482]
(From meta-yocto rev: 0d78ffd509c6caba6c74c6e75c485fb8d923cd31)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a script to verify all the recipes' HOMEPAGE.
[YOCTO #5689]
(From OE-Core rev: 2dfb2ef06763cb6044dc1630875024e7310b3df4)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, we would have output like below from runqemu-extract-sdk.
Creating directory /home/chenqi/poky/build-systemd/./nfs-root
Normalize paths for runqemu-extract-sdk so that we have output like below.
Creating directory /home/chenqi/poky/build-systemd/nfs-root
(From OE-Core rev: c85f5ec502fecb1ff63f8e795a0da5fc92eca0c1)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(From meta-yocto rev: 58cc5c502bd0309feed65ab7836ed8fbaab6ced9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this is useful when using from jenkins job where you don't want to read
output just to dectect how bad it was
* add .log suffix to all files, so they can be easily downloaded from
http servers without default mimetype set to something useful
* add recipes failed in step 1 to steps 2 and 3 to generate standalone
logs for them
(From OE-Core rev: cef1d6deb5437edae56740436d8e77b8d941945a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add --analyze option, which is useful when using from jenkins job
where you don't want to read output just to dectect how bad it was
* I was always using something like this inside jenkins job, but better
to share it in original script
(From OE-Core rev: e73e1261879d9154d89cec35669ba22b499d8331)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was copy/pasted from another script and not corrected.
(From OE-Core rev: 65b79e8ffffb20b7dd83213c72774745f18d978d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use optparse instead of getopt (less code & automatic help)
* Change help text / output to use "recipe" instead of "package"
* Print something to indicate the script is still gathering information
Note that the long options have been renamed as appropriate.
(From OE-Core rev: 0ab4da8667cdf027d841e04ed5a35ddd45ad494a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are generic flags and shouldn't be listed in the output of this
script.
(From OE-Core rev: 0f8b16c5ea78f1d48b45cef7a317f8a307c48ebe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
