For various technical reasons, native and cross builds have a prefix that
includes the full path to the sysroot. As these are stripped away before the
files are used in the sysroot, we should also filter them out of the
buildhistory report. This both removes noise when sharing a buildhistory
repository between different build directories, and improves the accuracy of the
reports.
(From OE-Core rev: 8bf53fbb62749b5d77c246fab6e1246b93f8c50f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the sysroot isn't ran inside pseudo the ownership is whoever is running the
builds. In a setup where multiple builders all contribute to a shared
buildhistory writing the ownership data isn't useful, so just replace it with "-
-".
(From OE-Core rev: fadb7ae78876a7cf25c48481ff4ed3131e53415f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to the sysroot are just as interesting during development, so write the
file listing for the sysroot to buildhistory too.
(From OE-Core rev: b3ac82a27ab70ed6996fe3087a578ac637820329)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* especially when pushing longer history to slow remote git server or when
it timeouts during the push, it's useful to see where the time was actually
spent
(From OE-Core rev: 96f1225d47985d94d9ed91eb5e7affdd70671c79)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When collecting the git revision of repositories, also take
note of whether or not that repository has uncommited
changes.
This makes it a bit clearer what went on when looking at
diffs.
(From OE-Core rev: b9d780c7eeda0fefb13edde8bdba4f1d91e7823c)
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Avoid duplicating shell code for the two cases, fakeroot/non-fakeroot.
(From OE-Core rev: c4a931df28f45f95f19a13062b8dc38db60da342)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sort 'srcrevs' and 'tag_srcrevs' before iterating over them in order
to avoid unnecessary changes in the build history.
(From OE-Core rev: 031d708aedda11d65ba9746af4f01b91264a1f86)
Signed-off-by: Jacob Kroon <jacob.kroon@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All values written out to pkgdata are escaped (see write_if_exists() in
package.bbclass). In practice there tend not to be characters that need
escaping except in the scriptlets (pkg_preinst, pkg_postinst, pkg_prerm
and pkg_postrm) where currently we still see the escape codes in the
corresponding files within buildhistory (e.g. \n and \t) and thus also
in the output of buildhistory-diff, hindering proper diffing of changes.
To fix this, when we read values from pkgdata and write them out to
buildhistory, we need to interpret the escape codes by doing the exact
reverse of what we do in package.bbclass.
(From OE-Core rev: c258379181a438cb01728d223b3d05e0ab205941)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The FILELIST field of the package info file in the buildhistory
repository is a space-separated list of all of the files in the package.
If a name of a file packaged by a recipe contains a space character then
of course the result was that we didn't handle its name properly. To fix
that, use quotes around any filename containing spaces and at the other
end use these quotes to extract the proper entries.
Fixes [YOCTO #12742].
(From OE-Core rev: 801b705957dc683030d11393f43407d0b3506b6a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The most common usage for buildhistory is with commits enabled so that
you actually collect history, rather than just keeping a snapshot of the
most recent build state, therefore default BUILDHISTORY_COMMIT to "1".
This really ought to have been the default in the beginning, I can't
really explain why it wasn't.
(From OE-Core rev: 8018a2349b7ad5ab27731c93a49603adf5f72fc2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Search made with the following regex: getVar ?\((.*), True\).
(From OE-Core rev: dbc0eaf478feb3f752ae22fd184984494fc85d0a)
Signed-off-by: Ming Liu <liu.ming50@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The ptest log will be saved to buildhistory/ptest, we can easily get
the regression result between builds by:
$ git show HEAD ptest/pass.fail.skip.*
[YOCTO #11547]
(From OE-Core rev: dcb6cd19fb8c639cb844d116fb83827267f37421)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the user easier to know how to make commit in buildhistory.
[YOCTO #11547]
(From OE-Core rev: 164a0bd847f02ca65dcd53ddc789690060274191)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It's possible for tasks to stage symlinks that point to non-existent
files; an example is ncurses-native.do_populate_sysroot. There wasn't
any error checking here so this broke the build when "task" was included
in BUILDHISTORY_FEATURES. In any case we shouldn't be following symlinks
and getting the sha256sum of the link target - we need concern ourselves
only with the target path, so check if the file is a link and sha256 the
target path instead if it is. If it's neither a regular file nor a
symlink (perhaps a pipe or a device), just skip it.
(From OE-Core rev: f60520d97f53dafe783f61eb58fe249798a1e1be)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add get_extra_sdk_info to reuse code in buildhistory
The functionalities to generate SDK and eSDK manifest files are different,
the SDK comes from package information and the eSDK comes from sstate artifacts.
Only execute write_sdk_{host, target}_manifest when is on populate_sdk class.
Adds new functions write_sdk{host, target}_ext_manifest to execute on postprocess
in populate_sdk_ext because at the end we have all the sstate artifacts to
generate the manifest.
[YOCTO #9038]
(From OE-Core rev: 25ad7ed6f7bb0c931b404bda09576323200d093d)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function is going to be used for generating the target and host
manifest files packages for eSDK. Added some fixes for buildhistory.bblclass,
and docstring for get_extra_sdkinfo at oe.sdk
[YOCTO #9038]
(From OE-Core rev: f696b3bbe01969ce7ecb8174d63d3e1e172b473e)
Signed-off-by: Francisco Pedraza <francisco.j.pedraza.gonzalez@intel.com>
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Convert incorrectly formatted dependencies such as:
"bar -> "foo" ">=" "1.2.3"
into dependencies with edge labels:
"bar -> "foo" [label=">= 1.2.3"]
* Remove rpmlib() and config() dependencies such as:
"foo" -> "rpmlib(CompressedFileNames)" [label="<= 3.0.4-1"]
and:
"base-files" -> "config(base-files)" [label="= 3.0.14-r89.49"]
* Remove the trailing semicolon that was added to each line. It fills
no purpose.
(From OE-Core rev: 37ea2c8b299483f0e12fad66efa789c6445571e0)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enabling SSTATE_MIRRORS sometimes causes SRCREV values not
to be written/updated in the build history. This happens more
often if SRCREV is set to ${AUTOREV}
Explicitly writing SRCREVs when recipe history is being written
should fix this.
[YOCTO #10948]
(From OE-Core rev: df74b97599a789db742fc7588009783f5f37ebff)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We put the bitbake command line in the buildhistory commit message for
informational purposes, but calling sys.argv to get that as we were
previously doesn't really work in memory resident mode - that gives you
the command used to start the bitbake server which is much less
interesting. Use the just-introduced BB_CMDLINE variable instead.
Part of the fix for [YOCTO #11634].
(From OE-Core rev: 1a6424ee4c865601ff324e9599a2f48c9e6723ee)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Way back in OE-Core commit fba198ac7efe476a25c5761878ef2fcee97bf9f1 in
2012 we split committing to the repository, making a commit per
top-level directory. However, as we add more information it becomes
harder to see which commits belong to which build. Switch back to a
single commit per build to keep the history tidier.
To address the original concern, if you do want to see just the changes
for a particular subdirectory, git can filter that for you - just
specify that subdirectory as the last parameter on the git show / git
diff command line and that's all you will see.
(From OE-Core rev: b49a4a47783609fe9161fbc11cc7c7ff3ff4b6bb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Save a file per task listing sha256sums for each file staged, i.e.
the output of the task. Some caveats:
1) This only covers sstate tasks since it uses SSTATEPOSTUNPACKFUNCS,
however those are generally the most interesting in terms of output
anyway.
2) The signature is taken before applying any relocations, so any
relocated files will actually have different signatures, but that's
churn that you probably won't want to see here.
3) At the moment if you run the same build twice without sstate you will
very likely see changes in the output for certain tasks due to things
like timestamps being present in the binary output. Fixing that is
a general Linux ecosystem problem - see this page for our efforts to
resolve it on our side:
https://wiki.yoctoproject.org/wiki/Reproducible_Builds
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
(From OE-Core rev: ca5d1273432e20059ab66d721a9eb314a54e81e7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we want to determine what changed since the last build, one angle
from which to look at it is to check the signatures. However, if we
don't actually have the signatures from the last build we don't have
anywhere to start. Save the signatures on each build in order to give us
the starting point.
NOTE: you need to set your BUILDHISTORY_FEATURES value to include
"task" to enable collection of these signatures as it is is disabled by
default.
(From OE-Core rev: 11f68f65c46c5bc26ddeeade3021e83b3a7f895a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Enabling or disabling buildhistory caused a rebuild of images, which
is undesirable. For example, it prevented image reuse from a main
build with buildhistory in a following oe-selftest where buildhistory
must be disabled.
The reason are the additional ROOTFS_POSTUNINSTALL_COMMAND and
ROOTFS_POSTUNINSTALL_COMMAND entries. Those need to be excluded both
via vardepvalueexclude and vardepsexclude.
(From OE-Core rev: e4c28ea05ef4514deb3d19e8e33f81d352712455)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is useful to know which layer provided a given recipe and its
binary packages.
Many projects combine a number of layers and some of them
also provide same recipe names in which case bitbake
can prioritize between them. buildhistory can record
the decision by saving the layer from where the recipe
was taken from.
Also, if a project is split to sub projects which maintain
recipes in different meta layers, then meta layer specific
summaries of e.g. disk usage can be calculated if
source recipes meta layer name is recorded for example in
buildhistory.
If source layer is not in build history, then layer providing
the recipe can be exported from build environment using
'bitbake-layers show-recipes', but it takes a long time to execute
since all recipes are parsed again and requires full source tree
with correct build configuration.
This patch exports the name of layer as configured in BBFILE_COLLECTIONS
append of its layer.conf. 'bitbake-layers show-recipes' exports the
meta layers directory path name. For several open source layers
these are different, e.g. meta-openembedded/meta-perl/conf/layer.conf
is perl-layer, poky/meta/conf/layer.conf is core,
poky/meta-skeleton/conf/layer.conf is skeleton etc.
(From OE-Core rev: d8e59d1f840e4282859ad14397d1c06516b8eb11)
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If sdk ins't in BUILDHISTORY_FEATURES the get_extra_sdkinfo fails
because no information about sdk is generated in buildhistory repo.
(From OE-Core rev: e6a0ea6146171635c49b18e00b4b11a9a7ff20ee)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
All other fields are separated by tabs except KiB and binary package
name. This helps users, *cough managers*, who import this file into
MS Excel to calculate file system usage summaries.
(From OE-Core rev: e26bed8493d7b096740cd6fff2e72ab27d48a933)
Signed-off-by: Mikko Rapeli <mikko.rapeli@bmw.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the datastore works dynamically we don't need the update_data calls
so we can just remove them. They're not actually done anything at all for
a while.
(From OE-Core rev: 8de0c5d3bd01919e2bf0394f9c485936d6098cec)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory was writing srcrevs.values() as SRCREV when only one
srcrev/branch exists. This returns a view of the dictionary values in python
3, and used to return a list in python 2, neither of which is an appropriate
value for SRCREV. It was resulting in latest_srcrev files like this:
# SRCREV = "346584bf6e38232be8773c24fd7dedcbd7b3d9ed"
SRCREV = "dict_values(['346584bf6e38232be8773c24fd7dedcbd7b3d9ed'])"
Which in turn would result in invalid output in buildhistory-collect-srcrevs.
Fix by calling `next(iter())` on the `.values()`
(From OE-Core rev: ef826a395612400924bbe49859d256b237ff59e1)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If attempting to patch a git repo without a proper git config setup,
an error will occur saying user.name/user.email are needed by git
am/apply. After some code was removed from kernel-yocto, it was
simple enough to reproduce this error by creating a kernel patch and
using a container to build.
This patch abstracts out functionality that existed in buildhistory
for use in other classes. It also adds a call to this functionality
to the kernel-yocto class.
Fixes [YOCTO #10346]
introduced in OE-core revision
0f698dfd1c8bbc0d53ae7977e26685a7a3df52a3
(From OE-Core rev: 25b43cb05c645e43f96bc18906441b8fdc272228)
Signed-off-by: Stephano Cetola <stephano.cetola@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This code was outputting variables by iterating a dictionary. In Py2 this
always results in the same iteration order but with Py3 the order changes every
execution, which resulted in buildhistory having to store diffs where fields
were simply re-ordered.
(From OE-Core rev: f9faa8df85317d12743134a44576b4882a9fb22a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got fed up with seeing items dance around in sstate-package-sizes.txt
in the buildhistory git repo simply because they have the same size.
Let's sort the list first by size and then also by name to ensure items
with the same size are deterministically sorted.
(From OE-Core rev: 7340c1ea677731d21351d47d935d9de7d7e2eda5)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add SDK_INCLUDE_PKGDATA and SDK_INCLUDE_TOOLCHAIN to the variables that
we put into sdk-info.txt
(From OE-Core rev: 4bf5be6a1fc39f367bbb59e1787cb55e7b5835ae)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch contains all the other misc pieces of the transition to
python3 which didn't make sense to be broken into individual patches.
(From OE-Core rev: fcd6b38bab8517d83e1ed48eef1bca9a9a190f57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Iterators now return views, not lists in python3. Where we need
lists, handle this explicitly.
(From OE-Core rev: caebd862bac7eed725e0f0321bf50793671b5312)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
python3 standardises its use of iteration operations. Update
the code to match the for python3 requires.
(From OE-Core rev: 2476bdcbef591e951d11d57d53f1315848758571)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In python3, strings are unicode by default. We need to encode/decode
from command pipelines and other places where we interface with the
real world using the correct locales. This patch updates various
call sites to use the correct encoding/decodings.
(From OE-Core rev: bb4685af1bffe17b3aa92a6d21398f38a44ea874)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This class adds functions to the SDK creation hooks, so ensure that they're
ignored in task stamps.
(From OE-Core rev: b15b977d10b5165728c1238b8d67a73719d29d60)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix a minor grammatical error in the comments here.
(From OE-Core rev: ddc60aea113e587f27df03645620d6eb677ff28a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For images we produce a number of filtered dependency .dot files for
readability, the first of which is depends-nokernel.dot which filters
out just the kernel itself (not kernel modules). Unfortunately the
filter specifications hadn't been updated for the dash-to-underscore
removal or the 4.x kernel upgrade, thus the filtering wasn't actually
doing anything.
(From OE-Core rev: ec1077bed0c1538084bceeafb957abe725b13b76)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Invoking oe-pkgdata-util in turn for every package in the list was slow
with a large image. Modify oe-pkgdata-util's read-value command to take
an option to read the list of packages from a file, as well as prefix
the value with the package name; we can then use this to get all of the
package sizes at once. This reduces the time to gather this information
from minutes to just a second or two.
Fixes [YOCTO #7339].
(From OE-Core rev: 51c24904cc1bc823bccc3f179b8d7a192dace168)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory_get_imageinfo() assumed that the buildhistory directory
for the image had already been created earlier. That assumption is not
true for special images (like the virtual swupd images from
meta-swupd) where the entire traditional do_rootfs/do_image is
skipped.
Creating files-in-image.txt still makes sense for such images, so
support them by creating the directory also in
buildhistory_get_imageinfo().
(From OE-Core rev: 723328319ee53235969ec9cce7ff5d7729dcf8d7)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've recently added SDK_EXT_TYPE and SDK_RECRDEP_TASKS and these will
have an effect on the size and functionality of the SDK, so record them
in sdk-info.txt.
(From OE-Core rev: 1be0ae80f97bdee758232ec5397c09d73d57e1e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
buildhistory.bbclass by design is incremental: each build adds or
updates information. Information is never removed.
Sometimes it can be useful to reduce the information only to those
recipes that were build during a specific bitbake invocation, for
example when the invocation does a full world build.
This is now possible by setting BUILDHISTORY_RESET as explained in the
modified class. The comment on the variable also mentions the caveats
associated with using this mode.
In this mode, buildhistory.bbclass first moves all existing
information into a temporary directory called "old" inside the build
history directory. There the information is used for the "version
going backwards" QA check. Then when the build is complete and before
(potentially) committing to git, the temporary directory gets deleted.
Because information that has not changed during the build will be
reconstructed during full world rebuilds, a git log will then only
show real updates, additions and removals.
(From OE-Core rev: 51f4eb5bfcd25f7160e50314f433cad126aa3e9a)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Variable expressions are no longer expanded in python functions as of
BitBake commit 8bf33a8e92c0e188fa392030025756196c96fcbb, so we've now
got to do this explicitly here.
(From OE-Core rev: 60fd4ff61a4ad240a89d48553002901c10e93178)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Its valid to have dependencies like XXX (=2.1) without spaces, as injected
by debian.bbclass. The code was breaking these into separate components
and destroying them so improve the regex to handle them.
(From OE-Core rev: 613e96b06202f31870be411ca45b44237ae55b1c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, in order to determine the existence of an already
initialized Git repository we checked if a directory named '.git' was
present in the buildhistory dir. However, e.g. in the case of git
submodules '.git' may also be a regular file referencing some other
location which was causing unwanted behavior. This patch changes
buildhistory.bbclass to check for any file named '.git' which fixes
these problems.
[YOCTO #8911]
(From OE-Core rev: a5e931e0b1d941cc938fe2f49625c54b07fab0ce)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch changes the use list_pkgs() instead of list()
from class RpmPkgsList. The change is in two functions,
image_list_installed_packages from rootfs.py and
sdk_list_installed_packages from sdk.py.
With this change the functions calling the functions
listed above, must format the output as they required.
The formatting can be done using format_pkg_list() from
oe.utils.
The classes calling the afected functions are changed too
with this patch, to keep the same functionality using the
new data structure.
[YOCTO #7427]
(From OE-Core rev: 983ea373362514e5888bd1d7d9c4f136c94b00f2)
Signed-off-by: Mariano Lopez <mariano.lopez@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These form part of the configuration for the extensible SDK, we should
really be recording what goes into them.
(From OE-Core rev: bd1557bfd726e44c23ab6220867119c57ac6b596)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was using bytes here for the sizes and writing out KiB as the suffix.
Change it to actually write out size values in KiB.
(From OE-Core rev: e6b1840ee9aeb933f86fd2a92a90b94c1bc9db7c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
