The comment is misleading and there was confusion in a bug report. In the native
case STAGING_DATADIR would be equal to the native value so there isn't any issue
but tweak the comment.
[YOCTO #12761]
(From OE-Core rev: 0fdf76305a3cb543c23d6122c523ce5c2af04a0c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With meta-micro, ${prefix} is the empty string. This means that
CMAKE_INSTALL_BINDIR:PATH and friends end up containing paths starting with
many instances of "../", presumably due to os.path.relpath attempting to
find its way to the current directory.
Let's avoid this by ensuring that the root path always ends in a slash. If
it already ends in a slash then adding another one shouldn't cause any
problems.
(From OE-Core rev: 67b19414c1c17f71f39c971b9f9fdd1f776516a1)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting the CMAKE_C{,XX}_COMPILER_LAUNCHER variables is the recomended way to
deal with ccache in CMake. It allows build scripts to optionally opt-out of
ccache, which is especially useful when the pre-processed GCC output is required.
(From OE-Core rev: 0a36d1b342c0b4760bc75794c2e941a17012bc19)
Signed-off-by: Philippe Normand <philn@igalia.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support project-file generators such as CodeBlocks, CodeLite,
Eclipse, Sublime, and Kate for both make and Ninja build systems.
The following generators are listed in cmake --help:
Unix Makefiles = Generates standard UNIX makefiles.
Ninja = Generates build.ninja files.
Watcom WMake = Generates Watcom WMake makefiles.
CodeBlocks - Ninja = Generates CodeBlocks project files.
CodeBlocks - Unix Makefiles = Generates CodeBlocks project files.
CodeLite - Ninja = Generates CodeLite project files.
CodeLite - Unix Makefiles = Generates CodeLite project files.
Sublime Text 2 - Ninja = Generates Sublime Text 2 project files.
Sublime Text 2 - Unix Makefiles
= Generates Sublime Text 2 project files.
Kate - Ninja = Generates Kate project files.
Kate - Unix Makefiles = Generates Kate project files.
Eclipse CDT4 - Ninja = Generates Eclipse CDT 4.0 project files.
Eclipse CDT4 - Unix Makefiles= Generates Eclipse CDT 4.0 project files.
All but one of these contain one of the strings, "Unix Makefiles" or "Ninja".
In each of these cases, cmake generates the Makefiles (or ninja files respectively),
and also the appropriate project files, eg. .project and .cproject for Eclipse.
A user can set OECMAKE_GENERATOR in their local.conf to any
one of these strings, except "Watcom WMake" (not supported).
(From OE-Core rev: 256e8b5deae66b1463c359db12af396702912139)
Signed-off-by: Nikhil Pal Singh <nikhilpal.singh@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the dawn of time, we have set CMAKE_VERBOSE_MAKEFILE=1 in cmake.bbclass.
Back in 2016, we also explicitly set VERBOSE=1 in cmake_do_compile(),
to ensure that make (and ninja) output were verbose in log.do_compile.
Turning off CMAKE_VERBOSE_MAKEFILE=1 means that make (or ninja)
invocations from the command-line are non-verbose,
giving CMake's default human-readable output on the terminal instead.
The user can still invoke VERBOSE=1 make if they do want verbose output.
This has no effect on the verbose output that goes into the logs.
(From OE-Core rev: 75c4b61513d8b089e835fb8d5923d8749fed7880)
Signed-off-by: Douglas Royds <douglas.royds@taitradio.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This can make the following recipes work with cmake:
cmake libdnf libcomps librepo createrepo-c llvm dnf libsolv assimp waffle
libjpeg-turbo taglib libproxy libical
And the following 3 recipes don't:
webkitgtk vulkan piglit
Now cmake.bbclass doesn't disble ccache any more, disable it in the recipes if
needed.
(From OE-Core rev: d014c8c11fb663f131d3a860ddeda17d604b2dd3)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This resolves issues with paths being marked as system includes that
differ from /usr/include but are considered implicit by the toolchain.
This enables developers to add directories to system includes
to supress compiler compiler warnings from them.
(From OE-Core rev: 9c2227d5d960f93e00791157354f0c920fbecf39)
Signed-off-by: Michael Ho <Michael.Ho@bmw.de>
Cc: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are various escape characters in these stings which python warns
about so use the correct regex markup for them.
(From OE-Core rev: 252b69c9f2abe3258366c540f56b156ed63e5437)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move packaging rules for cmake -dev files from cmake.bbclass into
bitbake.conf to handle recipes (e.g. harfbuzz 1.8.1) which build with
autotools but also install cmake -dev files.
(From OE-Core rev: 543e39ad5e2baa0f1ece013a89483783e6b15dd9)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake_do_compile() and cmake_do_install() basically do the
same, except they use a different --target, and at the
moment this is copy/pasted code with a minor modification.
Other recipes which e.g. might want to support compilation
as part of ptest have to do the same. This is a bit
inconvenient.
By factoring out all of this into a common helper,
cmake_runcmake_build(), this is easily re-used. An
(imaginary) recipe can compile ptest support simply by
using
cmake_runcmake_build --target buildtest-TESTS
(assuming such a build target exists).
Also, this now is very similar to oe_runmake().
(From OE-Core rev: 7620dafe7358f017a8cd558b480af73896768f04)
Signed-off-by: André Draszik <andre.draszik@jci.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This changes the cmake class to use Ninja instead of Make by default.
If a recipe is broken with Ninja then the recipe can set OECMAKE_GENERATOR="Unix
Makefiles" to change back to Make.
(From OE-Core rev: bacaa26decb8a1e3fa672e1923954793fde48766)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add OECMAKE_GENERATOR variable to control which generator is used by CMake,
defaulting to the upstream default of Unix Makefiles for now. The other
supported option is Ninja, which is faster than Make for large projects (for
example, using Ninja takes three minutes off webkitgtk:do_compile for me).
(From OE-Core rev: 6e3f719076cab469f56cd1555bd219a5c3fd135d)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The 3.10.1 version has been in Dec 13, 2017, and has a great set of
features and improvements since the last upgrade.
The release notes of 3.10 release is available at:
https://cmake.org/cmake/help/v3.10/release/3.10.html
Patches updates:
- cmake-Prevent-the-detection-of-Qt5.patch: so it replaces the sed
command calls inside the cmake.inc
- 0001-FindCUDA-Use-find_program-if-find_host_program-is-no.patch:
merged upstream, so it has been removed.
- support-oe-qt4-tools-names.patch: rebased.
License-checksum-change: added new contributors
(From OE-Core rev: 9e58926f1cea9d5cb18cb923855d1ae98f88a8ac)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Don't hardcode the targets used in do_compile and do_install, instead build
"all" and "install" by default but respect OECMAKE_TARGET_COMPILE and
OECMAKE_TARGET_INSTALL variables.
(From OE-Core rev: 806765ec466597d38231d4be303cb48c26e21466)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various recipes that inherit cmake contain FILES_${PN}-dev magic to add the
generated package files to their -dev packages. Since this is a standard
feature of cmake, we might as well teach cmake.bbclass to do this itself so
those recipes can be simpler.
(From OE-Core rev: d91dc4666683a96e9d03cbbd21b8a546f9069c93)
Signed-off-by: Mike Crowe <mac@mcrowe.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than presuming `make` is the generator, use cmake's generic
`cmake --build` feature (which knows to call the appropriate generator).
Both DESTDIR and VERBOSE still behave as intended when used as
environment variables instead of make variable-arguments.
As cmake-based builds don't do any configuration with `make`
invocations, we only pass `PARALLEL_MAKE{,INST}` (via a
EXTRA_OECMAKE_BUILD variable) to the underlying build tool. Make &
ninja support the same `-j N` option (and a few others), so this does
happen to work for both.
This makes it more straight forward for others to select other cmake
generators (many folks have been reaching for `ninja` lately).
CC: Andre McCurdy <armccurdy@gmail.com>
(From OE-Core rev: 2b06cb961edbe52ff66e8edccd007edd0795c30b)
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default dir for do_compile & do_configure is already ${B}, no need
to cd (other than broken appends)
CC: Andre McCurdy <armccurdy@gmail.com>
(From OE-Core rev: c5da7a3637b0eb8ec5b7368c7ac732d802a703f9)
Signed-off-by: Cody P Schafer <dev@codyps.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make it slightly easier to support situations where the default path
needs to be over-ridden more than once.
(From OE-Core rev: 07390e3d45cdf244079a6b91175512ebac789da0)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using bitbake variable syntax (i.e., ${FOO}) for shell variables is
bad practice. First of all it is confusing, but more importantly it
can lead to weird problems if someone actually defines a bitbake
variable with the same name as the shell variable.
Also use lower case for local shell variables.
(From OE-Core rev: ea6befae799f45cf93771442f242cb023dd809d1)
Signed-off-by: Peter Kjellerstedt <peter.kjellerstedt@axis.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If CMAKE_SYSTEM_NAME is defined, CMake assumes we're cross-compiling,
which is not necessarily the case.
(From OE-Core rev: bd082c9be6191e67ea1b1bf10ce5e130a3433ab5)
Signed-off-by: Kyle Russell <bkylerussell@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(From OE-Core rev: 7c552996597faaee2fbee185b250c0ee30ea3b5f)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We strip the TOOLCHAIN_OPTIONS and HOST_CC_ARCH from CC/CXX in cmake.bbclass
whereas CFLAFS and CXXFLAGS assume that TOOLCHAIN_OPTIONS are
part of CC/CXX variables, this causes compile failures when cmake
is running compiler tests during configure on some architectures
especially armhf, because hf ABI information -mfloat-abi is part
of TOOLCHAIN_OPTIONS, so what happens is that testcase gets compiled
without hard-float, howver, during linking the float ABI option
is passed via LDFLAGS, now linker rejects this and fails like
/mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: error: cmTC_27947 uses VFP register arguments, CMakeFiles/cmTC_27947.dir/src.cxx.o does not
mnt/a/build/tmp-glibc/sysroots/x86_64-linux/usr/libexec/arm-oe-linux-gnueabi/gcc/arm-oe-linux-gnueabi/6.2.0/ld: failed to merge target specific data of file CMakeFiles/cmTC_27947.dir/src.cxx.o
collect2: error: ld returned 1 exit status
This means that CMake now fails the configure time test too
which is not right, e.g. it might disable features which actually do exist
and should be enabled e.g. in case above it is resulting as below
Performing C++ SOURCE FILE Test HAS_BUILTIN_SYNC_SUB_AND_FETCH failed with the following output:
Its actually a bug in CMake see
https://gitlab.kitware.com/cmake/cmake/issues/16421
CMake is ignoring CMAKE_CXX_FLAGS when using CHECK_CXX_SOURCE_COMPILES
function.
Until it is fixed upstream, we add HOST_CC_ARCH and TOOLCHAIN_OPTIONS
to CFLAGS and CXXFLAGS, so that we can ensure that compiler invocation
remains consistent.
(From OE-Core rev: 826f3cdb474b5728b22f08d2342fc90235ca9e7d)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the user modifies files such as CMakeLists.txt in the case of cmake,
we want do_configure to re-run so that those changes can take effect. In
order to accomplish that, have a variable CONFIGURE_FILES which
specifies a list of files that will be put into do_configure's checksum
(either full paths, or just filenames which will be searched for in the
entire source tree). CONFIGURE_FILES then just needs to be set
appropriately depending on what do_configure is doing; for now I've set
this for autotools and cmake which are the most common cases.
Fixes [YOCTO #7617].
(From OE-Core rev: 923fc20c2862a6d75f949082c9f6532ab7e2d2cd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake sets all imported headers as system headers. This causes trouble for c++
projects [1].
Thanks to Jack Mitchell for pointing to the setting [2]. Build tested upon
meta-qt5-extra-world which had lots of fallout before.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70129
[2] http://lists.openembedded.org/pipermail/openembedded-core/2016-September/126067.html
(From OE-Core rev: a5bf690e27a32c5470a4e110ab58ed0a92b9d039)
Signed-off-by: Andreas Müller <schnitzeltony@googlemail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
CMake wants a relative path for CMAKE_INSTALL_*DIR, an absolute path
breaks cross-compilation. This fact is documented in the following
ticket: https://cmake.org/Bug/view.php?id=14367
$sysconfdir and $localstatedir are not relative to $prefix, so they are
still set as absolute paths. With his change ${PROJECT}Targets.cmake
that are generated by cmakes "export" function will contain relative
paths instead of absolute ones.
(From OE-Core rev: c03b32bd71dbe04f2f239556fea0b53215e403d7)
Signed-off-by: Thomas Witt <Thomas.Witt@bmw.de>
Signed-off-by: Clemens Lang <clemens.lang@bmw-carit.de>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake outputs percentage complete as part of its compilation process, so
we can enable BitBake's new progress scanning for do_compile here.
(From OE-Core rev: f77ea95ba5cd337f01f2a1b4fe9466feb6af9440)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The CMake recipes contain a mismatch between the environmental variable
which defines where the Modules are installed and the location where they
actually are. This patch fixes the environmental variable to point to the
proper folder defined according to the cmake version.
(From OE-Core rev: 642bd49964690259328f506df41a1764c5ac6226)
Signed-off-by: Jose Pardeiro <jpardeiro@rapyuta-robotics.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To help debugging build problems pass VERBOSE=1 to make so that the makefiles
print their commands, just like we do with autotools.
(From OE-Core rev: 62f95a769ec9e11c72fbf78257badbfb59f1b354)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* add separate variable for configuration options generated from
PACKAGECONFIG setting, this helps other bbclasses and recipes
to take advantage of PACKAGECONFIG mechanism, without including
other options from EXTRA_OECONF
* e.g. meta-qt5 recipes are abusing EXTRA_OECONF to get options
from PACKAGECONFIG:
EXTRA_QMAKEVARS_PRE +=
but with
conf/distro/include/no-static-libs.inc
it means getting --disable-static as invalid option inside
EXTRA_QMAKEVARS_PRE as reported by Alexandre Belloni who tried
to use poky with meta-qt5.
* once we migrate all bbclasses and recipes to PACKAGECONFIG_CONFARGS
we should also restrict EXTRA_OECONF append only to autotools.bbclass
like I did for cmake.bbclass
(From OE-Core rev: 0ea4a47bfc27d02594d489b27c029d3d3badf3d4)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
autotools was inherited for some functions some time ago, but now all it's using
it for explicitly is autotools_do_install(), which is basically just "make
install". Invoke that directly and we can remove the inherit autotools.
(From OE-Core rev: 1cbc0400621c23243d96dedf4a226a732f5c87c9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base CMAKE_<LANG>_FLAGS are included for all build types,
therefore the CMAKE_<LANG>_FLAGS_RELEASE should contain only
additional flags or over-rides.
https://cmake.org/cmake/help/v3.2/variable/CMAKE_LANG_FLAGS.html
(From OE-Core rev: 961740d5d81ce44a595d5465bafb48a0cbab5159)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
cmake expects target architecture strings in the format of uname(2),
which do not always match TARGET_ARCH (e.g. powerpc vs ppc).
(From OE-Core rev: 7c61d022aa9bbba3c2f8a2df46eeb19e2772c89a)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For native builds of recipes (e.g. mariadb-native) cmake *must* look outside of its sysroot to find the compiler, so instruct it to do so.
(From OE-Core rev: 907828acebcf07d7a9367432432d04e0dab283d3)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some (e.g. piglit) CMakeList.txt files will extend CMAKE_MODULE_PATH before
calling project(), which is when the toolchain.cmake file is parsed. In this
situation the CMAKE_MODULE_PATH is overwritten, so handle this by appending in
toolchain.cmake instead of assigning.
(From OE-Core rev: 2cfa8427d77f680df37c12d00125501ebe7c38a3)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently if B==S for a cmake recipe, the build will not reconfigure. This patch adds
code to remove the generated cmake files, meaning cmake will then be forced to regenerate
them. This forces cmake to see configuration changes it may not otherwise see.
(From OE-Core rev: 01f4ed0cfbc60859aabfa5bff33ed966117a05d7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
UHD and GNU radio use the cmake build system. The toolchain file made
from cmake.bbclass does not set the variable needs by cmake projects
that use .S files. UHD added some .S files and these changes are required
to build recent UHD.
(From OE-Core rev: 43ce4b804d433662fe77c6f5298060ba74a0e639)
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it was dropped from default CXXFLAGS in:
commit 24dd8e129447013ee98609f3892ec414b1b21340
Author: Richard Purdie <richard.purdie@linuxfoundation.org>
Date: Sun Mar 2 17:38:33 2014 +0000
bitbake.conf: Drop -fpermissive
Drop the -fpermissive C++ compiler flag. We've had this around for years, most
code should have been fixed long ago. Its possible some recipes may fail
however we can (and should) just use the flag where needed.
* I haven't build world with this yet, but maybe it's time to
drop it here as well at least for consistency
(From OE-Core rev: 578124aedd3dbffd79ea01862d57223ffaa7216a)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some packages put their CMakeLists.txt file in a subdirectory, so assuming that
it is in ${S} won't work.
Restore OECMAKE_SOURCEPATH (defaulting to ${S}) so that the location of
CMakeLists.txt can be set if required.
Based on a patch by Miroslav Keš <miroslav.kes@gmail.com>
(From OE-Core rev: 2c23d7ab913a636aa0ab6a6e899cf6211d1e2714)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note issues when OECMAKE_BUILDPATH and OECMAKE_SOURCEPATH were being used
stated that an in-tree build would be done, but the default is in fact an
out-of-tree build.
(From OE-Core rev: 0dafb9f78e9ab9ec1a1483efc37902c2e8de3623)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Specify the full set of install paths (bindir, libdir, etc) for packages that
use the GNUInstallDirs module, instead of just the prefix and leaving the rest
as default (which breaks with multilib).
(From OE-Core rev: d3995ac14ba05c0420f15f264f7e9d0c3af71f74)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set B=${WORKDIR}/build in cmake.bbclass so that recipes using cmake.bbclass do
out-of-tree builds by default.
(From OE-Core rev: 783fb88f476c94d5d4f4b954f7053464d9a6dff5)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of the class-specific variables OECMAKE_BUILDPATH and
OECMAKE_SOURCEPATH, just use ${B} and ${S}.
If these two paths are different, delete any existing ${B} before running a
build so that previous builds don't taint the current build.
Note that OECMAKE_SOURCEPATH and OECMAKE_BUILDPATH are not respected, so recipes
that manually set these in the past will need to be updated to either use
something along the lines of separatebuilddir.inc or set B themselves. If the
old variables are set, a warning is displayed.
(From OE-Core rev: 43073569cb67d98c11aa71211d77b566b64f9145)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using TARGET_OS can add the ABIEXTENSION so ensure that is is removed for the Linux
TARGET_OS, we might have other TARGET_OSes so don't hard code CMAKE_SYSTEM_NAME
[YOCTO #5145]
(From OE-Core rev: 7d8b700242b1b32c6b6d0735b497701800f54fc4)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For unknown reasons, the cmake class is using SDK_OS as the
target system OS. This makes no sense but only shows up as a problem
when you try a different SDK OS. Fix it to use TARGET_OS which is
the correct thing to do. For the vast majority of users this will
make no difference.
(From OE-Core rev: 57be84259f0885865c85d7bac350979430b956b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use CFLAGS instead of CPPFLAGS for C_FLAGS variants.
When debug optimization is enabled in the local.conf, the debug (-O0) vs
production (-O2) does not change in the builds. As the CPPFLAGS do not
contain the optimization settings.
Also the CXX_FLAGS are based on CXXFLAGS, so it makes sense to similarly
set the C_FLAGS based on CFLAGS.
(From OE-Core rev: 558662927be550aeb8dd163f65e16b1750bbd127)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
